Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 Recommend Amp for Morel Pulse, Morel Pulse + Amp

views
     
6UE5T
post Nov 4 2014, 08:22 PM

Regular
******
Senior Member
1,704 posts

Joined: Sep 2012
QUOTE(junfu1988 @ Nov 4 2014, 06:14 PM)
Hi all, I just install a morel pulse recently directly connect from my HU (pioneer 63XX). I found out that the component set were much clarify in terms on human voice (especially female with high pitch).
I believe the component will work pretty well with a decent amp along but I've having difficulties on chosing the right amp for it. Need all your advice for that.

Maximo Pulse 6.5 details:

http://old.morelhifi.com/products/mob_2way_pulse.html

[attachmentid=4200947]
*
Best to use high powered amps around 100-120w rms to match its high power rating. I've used similar Morel component set before and I powered the mid and the tweeters individually with separate channel of about 50-60w each.
6UE5T
post Nov 6 2014, 12:46 AM

Regular
******
Senior Member
1,704 posts

Joined: Sep 2012
QUOTE(junfu1988 @ Nov 5 2014, 10:37 PM)
2-Channel amplifier with integrated active frequency crossover for Highpass, Lowpass and Bandpass The Helix Dark Blue 2is a perfectly equipped 2-channel power amplifier with a high-quality futuristic design. Thanks to their high output power and first-class active crossover technology it can be used in every operating mode.Features such as Bass Boost (0 up to +18dB at 45 Hz) and the variable active crossover for Highpass, Lowpass and Bandpass provide powerfull basses and perfect sound quality. Helix Dark Blue 2 power amplifier is the right choice for young and young-at-heart car audio enthusiasts.
Power RMS / Musik at 2 x 4Ohm at 13,8 Volt: 2 x 80/160 Watt
Power RMS / Musik at 2 x 2Ohm at 13,8 Volt: 2 x 120/240 Watt
Power RMS/Musik 1 x 4 Ohm bridged: 1 x 200/400 Watt
Total harmonic distortion: < 0,03%
Signal to noise ratio: > 93 dB
Bassboost adjustment : 0-18 dB
Frequency range Highpass: 15 Hz-4 kHz
Frequency range Lowpass : 40 Hz-4 kHz
Frequency range Bandpass: 15 Hz-4 kHz
Frequency range: 10 Hz-30 kHz
TIM distortion: < 0,04%
Input sensitivity: 200 mV - 8 V
Fuse: 1 x 30 A
Input impedance: 10 kOhm
Dimensions (H/W/D) in mm: 64 x 245 x 310
Weight netto: 3,6 kg /b]
how about this?
*
Spec wise still not enough coz the rms power rating are still below the speakers.

 

Change to:
| Lo-Fi Version
0.0170sec    0.47    7 queries    GZIP Disabled
Time is now: 20th December 2025 - 02:48 AM