Syarikat Weng Heng Tyre Service
53, Jalan BP 5
Bandar Bukit Puchong
47100 Puchong, Selangor, Malaysia

https://www.google.com/maps/place/Syarikat+...9b71dc847ee8e81

kenjilew mia phone number mintak sama jackson foo. lol.
btw kenji use 017 or 010? oops.

2 moons ago, we so happened managed to bring 1 of our own S4P3 GaGa go dyno. Whilst we managed to squeezed 95.5whp, the blacktop who spent 10s of thousands on tuning & performance parts, clocked 114whp

8X.X whp I also Jelly don't knw who leh 

fuiyo, but looks on the details works still look better thn mine...   
u lo, siapa lagi... 

Ah hypermile kaki eh. Regardless, CVT gets the most out of it. Several of my friends managed to clock similar mileage with their GaGa CVT as well. So far the best record I've seen on MT was 570km/tank. Mine was 540km

wah i butts3ck maxwell till kucimiao adi... you not kucimiao geh...

That's what I have in mind Just that I curious where to get the sockets to make the backup sensor works, so can prevent cutting wires to the original sensor kenjilew?

Not bcoz I rike pipu to noe mai kar got 3max, jz dat I dun rike that tom sticker thing, like every lala on the street also have that sticker - inklud kenjilew's car On the side note, POTENZA is tayar series from Bridgetstone haimai? Simply bcoz ayam ATR fans, so I erase9lan7 ur sticker dun wangto see it

I ader rdtax sticker, monthly coupon sticker, mcd drive through sticker.

You sold firestorm to me back then ader sticker tak?

At least dont look so stock.

Our LYN club no stickers kan hehee.

The last time I use Iridium plugs lasted like forever in my old Mitshi 4G92p. But since I'm having a Kampro, I took the heat transfer into account. In view of COIL ON PLUG setup, provided a Fiber valve cover which makes a perfect combination of disaster. I'd rather stick to copper to prevent my coil packs get gelled. You may wanna consider my suggestion and revert back to copper core. It's not going to be pretty when you seek for the coil packsin your country, coz it aint easy even in the almighty GaGa own home land.
Joe u were using Iridium rite?

I anticipated Joe's problem when fitting the iridium and used some silicone grease on the upper end of the tube where the rubber bung seals, I'm hoping it may help to avoid that drama.
Thanks for the warning, I'm taking note.
I also think I could easily adapt pretty near any coil on plug to work.

IIRC, yup..but it could be the plug and could be other things also. Just my opinion
Actually, this problem I think maybe not just due to the plug type cause I have saw a few cases at SC here the COP rubber broke also when the proton tech change the plug for some Persona and gaga and owners was furious when they were ask to pay for it. I believe regardless of what plug you use there will be heat and the place that hold our COP rubber boot is made of metal and the heat transfers directly to the rubber boot and the rubber boot is a really tight seal with the metal tubing. After my initial damage I have apply some high temp rubber grease meant to be used for brake caliper o ring around the rubber boot and the metal tube. This hopefully can solve the problem of the boot sticking to the metal tube overtime.

Also try not to overtighten the COP too much as it will force the rubber boot to go in much deeper and this makes thinking it out even more difficult. Just tighten bit that much is enough.

I've already ordered a set of Ignite Rev from TM Works Japan to replace the plastic rubber bottom plug of the COP. TM Works Japan know the rubber boot sticking problem so they made some enhancement to their rubber boot line up for Campro COP. Hopefully when I get these babies in.  I will be able try them out to see if they are easier to remove after installed. Price of these is around MYR450-500 depending on the conversion rate. Which to me is a good price because I know TM Works products that sells here are much higher due to the import taxes and such.
Image is for reference, actual product for the Campro I will take pic and post it here once I got them.


Above is just my opinion and idea it could be wrong or could be right.

Will happen the next time u open the coils
JIOed ady, u nvr pei atensen jek. Regardless lar, I salute TitanRev for taking the initiative to bcum huait rat. He for sure will dyno prove it for us rather than bunch of idiots go all out wasted marnee then placebo up car up until flying to the sky

Got...just need to very rajin look for it. So can say my rajin paid off. I know they have this performance parts since blm but that time no budget yet. The company don't stock this and are need to produce them only when have orders for Jap car mostly will have stock.
Hahahahaha
Have la...but 2nd set need to wait much longer.
Even ur engine cold down also same. I've been there done that. Hahahaha

Who wan to sell his boot tray???

Mine still in the boot.

Brother inlaw mau. Urs give it to me.

Thank you...but its all team work..thanks to you guys like yourself, kimi, ajem, tencek, Aaron, Azman, ca-wyn, LKC, david ke, V12, Mahihi, ken lew, jonnathan....all teach me a lot of things and gave me support...still much to learn....

anyway wish everyone a Merry Christmas and Happy New year and thanks.

freebies suda tarak. long time no join events dy