Your original choice of purchasing a R410A air con is a good choice, since in future you can just plug and play R410A air conditioners. R22 is being phased out. Sure, you can install R410A air con using R22 pipes but it is wrong specification. Also the gas itself is different, don't think you can mix.

Just like how you can pour Minyak Masak Cap Helang into your car engine. Sure it won't explode, sure it can work for a while. But its not the right specification and bound to fail. You got to ask yourself, do you really want to do it?

This post has been edited by Jason: May 19 2015, 06:25 PM

Hi, izzit possible to purchase original ac remote controller?

sure
what brand what model?

Electrolux (Invertor's remote, with big screen)
It has a sensor for the ac to detect. (i-Feel mode)

do you know where to get it ?



This post has been edited by nomoredfox: May 20 2015, 07:20 AM

How come so easy to spoil?

Check with seller will do, if not just go any computer shop or pasar Maram see wether got selling the universal will work

This post has been edited by kimsim: May 20 2015, 07:42 AM

ergh... so bad... TT
the salesman...
lou dim me...
so if like.. this time i use r410a piping fore r22 aircoind
then next time.. if i install r410a aircon.. still i need to remove all d current r410a pipe.. then change another new r410a pipe right TT

Just the screen getting dimmer and dimmer...sometimes screen empty

also battery consumption very high

Hye all.. Did panasonic aircond is not good compare to MHI and daikin??

cant think of why need change whole piping with already r410a piping installed., couldnt be the gas still remain in the pipe right...if change to r410a aircon for sure whole set indoor unit and compressor also change to new one right..

in my case, currently r22 piping, my contractor even told me in future can change to inverter/r410a aircon but need to do proper welding.. dont know how true is that

This post has been edited by cloud666: May 20 2015, 03:42 PM

Just ask him diesel car can able to used with petrol?

mayb will hv some leftover r22 gas inside d r410a pipe..
however.. i just.. let one room using r410a piping onli
the other room... the pipe which developer give ald conceal inside 1..
the aircon man say.. can use r22 pipe for r410a air cond worr..
nt sure true or not @--@ aiyh

walau, first salesperson lou dim u. now aircon man also tell you cock story ah?
diesel engine can use petrol or not? then answer your question lor.

You guys can read through here

but in another way can lor. r410a pipe using r22 pipe. just make sure at least 0.6mm thick

No body can tell in previous installed cooper pipe grade are G23 at least 0.6mm

No body can tell in previous installed cooper pipe grade are G23 at least 0.6mm

Actually can install with R22, but in the warranty won't be able to claim, if they found the user made used with existing R22 copper pipeline

i know lu
but the pipe ald tanam by the developer..
no choice lo..
let it be...
even my father and his aircon fren told me.. it's okay...
so.. if spoil dy.. let my father buy me a new 1... lol ><'''

just know .. gt this warranty problem @@'''

but if the house does come with pre installed piping(for R22) which is nvr been use. then i can used it for R410?
as it is new and no gas inside.
if can confirm it is 0.6mm then it would be better isnt it ?


as i don wish to rehack the whole thing.

If confirm the contractor given for at least 0.6mm should be find.

If less than 0.6mm, like 0.55mm will be leak at bending area, But I never tried before..

Cause my new Aircon when installed at same time must be used the new Cooper pipe.. Cause if we're using the existing pipe the cost still there and install new pipe the cost also be the same, why not using new pipes.

This post has been edited by kimsim: May 21 2015, 09:52 AM