same as title ...how to remove the the original stock heatsink fan from motherboard?

This post has been edited by jiant: Oct 19 2014, 12:31 AM

laptop? desktop? intel? amd?

desktop.. amd socket 939

after removing the clip lock on each side
twist the heat sink back and forth for a little while to loosen the paste as much as possible
continue lightly twisting while lifting

the best solution for ur problems just google it. or maybe youtube. Hope this can help

Already google...but no one is original stock heat sink ...so non know how to .

already settle..
Now non know which cable to plug into slot correctly.
Example Hdd Led cable ...got direction to plug or any direction will?
Also with P2 P3 and P9 cable where to plug
CPU fan cable where to plug?

Check your motherboard's manual. It might has the details of installing/removing stock heatsink.

i buy second hand board...non have manual.
And
Do I need to apply new thermal paste for CPU?
Only use 1 dot at center CPU?
And need to remove the old paste or just put new paste above?
How to clean old paste?can I use spirit?

Do u have the description(model name or model no) of the motherboard? U can find the "pdf" version of the manual via internet.
Once u have download the pdf manual, U can find whatever info on the motherboard. such as fan header sockets, internal usb header sockets & etc...
u need to clean the old thermal paste before u can apply the new thermal paste.
I use alcohol to clean the old thermal paste.

Good luck...

Abit kn8
But I only found abit kn8 sli manual...
What is P2, P6, P9 cable for? Where can I plug in?
ATX12V1 and ATXPWR1 need to plug in both?
Also
Please let me know which cable is must plug in and which 1 is not necessary plug in at motherboard side...
Can't find 1394 slot.

Is it what u look for...

https://www.scribd.com/doc/36757698/Abit-Kn...s-User-s-Manual

Abit MB, hmm.... this company was gone liao for quite some times.

This post has been edited by yhsiau: Oct 19 2014, 09:57 PM

Thank..
May I know which connector is must put into the slot?
As I know ATXPWR1 must plug in then ATX12V1 also need to plug in?
Ant other necessary connector to plug into motherboard slot to make system run except USB IDE and SATA?

Friend, don't be so lazy la... I think whatever information U need is in the manual, go RTFM.
U need to plug in the ATX power sockets & Front Panel sockets before U can start up your PC.

Further details plz refer to :
2.4.1 ATX Power Connectors
2.4.2 Front Panel Switches & Indicators Headers

Good luck.

How can I remove CPU old thermal paste ? Can I use methylated spirit to remove it?

bro usually all mobo have small marking on every plug/slot on its board.. look carefully an identify whether it is for 8pin cpu, 24pin mobo, sata, cpu fan, etc..

read the manual given and it should be easy.. regarding with the thermal paste, u can clean it up with any alcohol base liquid.. just go to any hardware store or pharmacy and ask for alcohol wipes/liquid.. if you lazy to find, just wipe it with anything and make sure no any residue left on it.. then put a pea size of new thermal paste on the cpu and mount the heatsink..

Seriously you can get all the answer by googling it.

https://www.google.com.my/search?q=How+can+...6J8LFmwXSnYKACg

This post has been edited by master2841: Oct 20 2014, 08:47 PM

what this 2 cable for
1 pin green
and
1 pin white
2 cable infront reset sw
green and white.

This post has been edited by jiant: Oct 21 2014, 07:33 PM


Attached thumbnail(s)