Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed

Outline · [ Standard ] · Linear+

 Anyone know what's the PFC value all about?

views
     
TSStuartLee2015
post Oct 16 2014, 12:32 AM, updated 12y ago

Regular
******
Senior Member
1,221 posts

Joined: Sep 2014
From: Malaysia


I saw a Cooler Master Silent pro gold 550W with Active PFC of >0.99, and some others is >0.9.

Base on Wikipedia, Active PFC is also some sort of Electromagnetic filter.


StereoPony
post Oct 16 2014, 12:45 AM

New Member
*
Junior Member
38 posts

Joined: Mar 2009
it's talking about the efficiency level.
TSStuartLee2015
post Oct 16 2014, 12:59 AM

Regular
******
Senior Member
1,221 posts

Joined: Sep 2014
From: Malaysia


QUOTE(StereoPony @ Oct 16 2014, 12:45 AM)
it's talking about the efficiency level.
*
then is the 0.99 is higher or the 0.9 and 0.99 is the same value ?
lex
post Oct 16 2014, 01:11 AM

Old Am I?
Group Icon
VIP
18,182 posts

Joined: Jan 2005
From: Dagobah
QUOTE(StuartLee2015 @ Oct 16 2014, 12:32 AM)
I saw a Cooler Master Silent pro gold 550W with Active PFC of >0.99, and some others is >0.9.

Base on Wikipedia, Active PFC is also someĀ  sort of Electromagnetic filter.
*
No, its is not. PFC stands for power factor correction. Generally in any mains AC system, the voltage and current are both out of phase. This effect causes low efficiency since both voltage and current are not aligned (e.g. when voltage level is present but the current level not equally present). PFC (power factor correction) tries to correct this effect by conjugating both voltage and current to (almost) the same phase. The closer both voltage and current in phase, the better the power factor correction... wink.gif

QUOTE(StuartLee2015 @ Oct 16 2014, 12:59 AM)
then is the 0.99 is higher or the 0.9 and 0.99 is the same value ?
*
When both voltage and current are in phase then PFC will equal "1". That "0.99" is almost as close as you can get to a perfect "1"... icon_rolleyes.gif

This post has been edited by lex: Oct 16 2014, 01:12 AM
TSStuartLee2015
post Oct 16 2014, 01:19 AM

Regular
******
Senior Member
1,221 posts

Joined: Sep 2014
From: Malaysia


QUOTE(lex @ Oct 16 2014, 01:11 AM)
No, its is not. PFC stands for power factor correction. Generally in any mains AC system, the voltage and current are both out of phase. This effect causes low efficiency since both voltage and current are not aligned (e.g. when voltage level is present but the current level not equally present). PFC (power factor correction) tries to correct this effect by conjugating both voltage and current to (almost) the same phase. The closer both voltage and current in phase, the better the power factor correction... wink.gif

When both voltage and current are in phase then PFC will equal "1". That "0.99" is almost as close as you can get to a perfect "1"... icon_rolleyes.gif
*
Thanks for the replies, what about the 0.9? some has 0.99. or they is the same?
lex
post Oct 16 2014, 01:28 AM

Old Am I?
Group Icon
VIP
18,182 posts

Joined: Jan 2005
From: Dagobah
QUOTE(StuartLee2015 @ Oct 16 2014, 01:19 AM)
Thanks for the replies, what about the 0.9? some has 0.99. or they is the same?
*
As mentioned earlier, the closer both voltage and current are in phase the better the power factor. The ideal/perfect power factor would be "1". Thus "0.99" is much closer to that "1", and of course better than "0.9". Its as simple as that... tongue.gif

Below is a simple ilustration of the difference between "without power factor correction" and "with power factor correction"... icon_rolleyes.gif

user posted image

TSStuartLee2015
post Oct 16 2014, 02:13 AM

Regular
******
Senior Member
1,221 posts

Joined: Sep 2014
From: Malaysia


Oh, now i understand smile.gif thanks

Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0143sec    0.79    5 queries    GZIP Disabled
Time is now: 20th December 2025 - 04:04 PM