Item(s):Autoglym Pure Shampoo (previously known as Bodywork Shampoo)
Description: A foaming shampoo that quickly removes everyday contaminants for a streak free finish
Squeaky clean paintwork is an essential part of the car care routine.
Bodywork Shampoo is an easy to use and safe pH neutral formulation. Its rich foam quickly breaks down and removes everyday contaminants from your vehicle.
For a long lasting shine, finish with Rapid Aqua Wax.
--- How to use: 1. Shake well. Pour 3 capfuls into a bucket and add 10 litres of water. 2. Hose bodywork before you start to rinse away excess dirt. Always work on a cool surface, shampooing the car from the roof down. Do not allow the shampoo to dry on the car. 3. Rinse well with clean water and dry with a Microfibre Drying Towel to prevent water spots. If you are using Rapid Aqua Wax, there is no need to dry the car.
Video Tutorial:
This post has been edited by lifeless_creature: Aug 14 2018, 09:13 PM
bro.. item received in nice packaging. truely recommended seller. A lot of advice from the seller as well, teach me from A to Z...will come back again if got budget!!!
bro.. item received in nice packaging. truely recommended seller. A lot of advice from the seller as well, teach me from A to Z...will come back again if got budget!!!
--- How to use: 1. Clean the lens with a shampoo and dry. 2. Mask to protect paintwork. 3. Sand with abrasive discs to remove heavy defects. 4. Sand with foam discs to refine scratches. 5. Polish with restoring compound to achieve a crystal clear finish.
Before use, please refer to the full instructions leaflet inside pack.
Wash the supplied accessories as required in clean, warm water and allow to air dry.
Video Tutorial:
This post has been edited by lifeless_creature: Feb 19 2018, 11:43 AM
Hi whats the difference between "Bumper and Trim gel" and "Vinyl and Rubber care"?
bro, depends on where u wish to apply on, if you wish to protect ur dashboard, door panels (interior), window rubber (which located inside the car), or plastics area in the car, then you should use Vinyl and Rubber Care.
if you wish to refurnish the exterior bumper, or exterior window rubbers or plastics areas, then use Bumper and Trim Gel.
bro, depends on where u wish to apply on, if you wish to protect ur dashboard, door panels (interior), window rubber (which located inside the car), or plastics area in the car, then you should use Vinyl and Rubber Care.
if you wish to refurnish the exterior bumper, or exterior window rubbers or plastics areas, then use Bumper and Trim Gel.
Ahhh that clarifies a lot, thanks! shall PM you shortly
Description: A super durable tyre gel that leaves either a high gloss or natural satin finish.
Perfectly dressed tyres complete the look of your clean car. This high viscosity gel is a long lasting, sweet scented tyre dressing. It contains active silicone polymers which contribute to the depth of shine and durability.
To ensure precise and even coverage apply with our Perfect Polish Applicator.
It can leave you with a high gloss or natural ‘new tyre’ finish, whichever you prefer.
--- How to use: 1. For best results ensure your tyres are clean and dry. Apply a small amount of High Performance Tyre Gel to a Perfct Polish Applicator. 2. Work the gel into the contours of the tyre wall, applying more product as required. 3. Leave for a few minutes to dry for a high gloss finish or immediately wipe over with a clean microfibre cloth for a satin sheen.
PRO TIP: For an ultra-high gloss finish apply a second coat once the first has dried.
Due to slippery characteristics use only on recommended areas. Do not use on motorcycle tyres.
FAQs: Q: How does the product differ from Instant Tyre Dressing? A: Instant Tyre Dressing is a sprayable liquid that can be applied to wet or dry tyres. High Performance Tyre Gel can be left for a high sheen or wiped for a more natural matt finish.
Q: What should I use to apply this product?
A: New High Performance Tyre Gel is applied with the Autoglym Perfect Polish Applicator. This applicator allows for a more detailed application and the gel is proven to offer a longer-lasting finish. Like Instant Tyre Dressing, no buffing generates high gloss finish, but wiping with a cloth whilst the gel is still wet creates a more natural satin finish.
Q: What happens if High Performance Tyre Gel is used on wet tyres? A: We recommend that freshly-washed tyres are allowed to dry or at least be wiped dry prior to application. This ensures that High Performance Tyre Gel dries evenly and leaves a consistently excellent finish on the tyres. Applying to wet wheels may result in an uneven, patchy finish.
Q: Can this product be used on motorcycles or bicycles? A: No. This product leaves a gloss finish which can be slippery – do not use on motorcycle or bicycle tyres or control surfaces of any vehicle.
This post has been edited by lifeless_creature: Mar 18 2017, 11:43 AM
Description: A fast acting compound that will remove tarnishing from brass, copper, stainless steel, chrome, aluminium and unlacquered aluminium alloys leaving them gleaming.
Formulated to tackle heavily tarnished metals, Metal Polish restores surfaces to their original finish and protects them with a layer of wax.
Suitable for brass, copper, stainless steel, chrome, aluminium and unlacquered aluminium. Do not use on chromed plastic, lacquered alloy wheels, mirror finished metals or chrome plate in new condition. For any of these surfaces use Super Resin Polish instead.
Once polished, these surfaces can be further protected with a wax or sealant.
--- How to use: 1. Shake well, apply to a soft cloth and rub back and forth over the metal surface. 2. As the metal is cleaned there may be a black build-up which can be buffed away with a microfibre cloth. 3. Increase the pressure over any stubborn areas.
Pro Tip: Do not use Metal Polish on modern chromed plastics, lacquered alloy wheels, mirror finished metals or chrome plate in new condition as these surfaces are softer. Use Super Resin Polish on these surfaces instead.
FAQs: Q: Can I apply Metal Polish to my exhaust? A: You can apply Metal Polish to any metal exhaust pipes.
Q: Can I use Metal Polish on metal trims? A: Metal Polish can be used on genuine metal trims however some trims can appear to be metal or chrome but are made from plastic. If they are made of plastic use Super Resin Polish instead. As long as your trims are genuine metal, you can apply metal polish. If you are working in a tight area, be sure to protect any surrounding painted or plastic surfaces with masking tape before use.
This post has been edited by lifeless_creature: Mar 18 2017, 11:45 AM
Description: Luxurious, high foaming shampoo, with an irresistible fragrance. Cleans paintwork leaving a silky smooth, high-gloss finish. Squeaky clean paintwork is an essential part of the car care routine.
Introducing Autoglym Ultra High Definition. Breathtaking finishes, luxuriously smooth with invigorating, sensual fragrances. Ultra High Definition products turn car care into pure pleasure.
Ultra High Definition Shampoo is a luxurious, high foaming shampoo that glides across paintwork for an effortless experience. The all new, pH neutral formula gently removes contaminants and road traffic film to produce a high-gloss finish that’s incredibly smooth to the touch. That’s the Autoglym way, always has been.
--- How to use: 1. Shake well. Pour 4 capfuls into a bucket and add 10 litres of warm or cold water. 2. Hose bodywork to rinse away excess dirt. Always work on a cool surface, shampooing the car from the roof down, moving the sponge or wash mitt in straight lines. Do not allow the shampoo to dry on the car. 3. Rinse well with clean water and dry with a Hi-Tech Microfibre Drying Towel to prevent water spots.
FAQs: Q: Is this shampoo pH neutral? A: Yes
Q: Can I use this product through a pressure washer? A: This shampoo has not been developed or tested for use through a pressure washer. Its viscosity may not be compatible with many pressure washers. We would recommend Autoglym Pressure Wash for use through a pressure washer.
Q: What is the benefit of the additional foam? A: Ultra High Definition Shampoo produces an abundance of soft, dense foam. The foam lasts for longer in the bucket and on the car. The foam coverage not only indicates where you have washed (reducing the likelihood of areas being missed), but the excellent cling time also reassures you that the shampoo is loosening and removing dirt and traffic film.
Video Tutorial:
This post has been edited by lifeless_creature: Feb 19 2018, 11:42 AM
Description: Our finest wax just got even better. For the ultimate mirror-like shine, providing more detail, depth and durability.
Introducing Autoglym Ultra High Definition. Breathtaking finishes, luxuriously smooth with invigorating, sensual fragrances. Ultra High Definition products turn car care into pure pleasure.
Ultra High Definition Wax is the result of countless hours of meticulous development in our state-of- the-art laboratories to produce our most luxurious wax finish yet. We understand the pleasure of standing back to admire a truly immersive, deeper gloss finish. It’s why Ultra High Definition Wax blends the finest ingredients, including Carnauba, to go beyond showroom shine to a whole new level of finish. That’s the Autoglym way, always has been.
Introducing Autoglym Ultra High Definition. Breathtaking finishes, luxuriously smooth with invigorating, sensual fragrances. Ultra High Definition products turn car care into pure pleasure.
Ultra High Definition Wax is the result of countless hours of meticulous development in our state-of- the-art laboratories to produce our most luxurious wax finish yet. We understand the pleasure of standing back to admire a truly immersive, deeper gloss finish. It’s why Ultra High Definition Wax blends the finest ingredients, including Carnauba, to go beyond showroom shine to a whole new level of finish. That’s the Autoglym way, always has been.
--- How to use: 1. Inspect your clean and dry paintwork for contamination or light scratches, and if required, treat with Surface Detailing Clay Kit or Super Resin Polish.
2. Dampen the white side of the supplied wax applicator. Gently dab the applicator on the wax in the pot and then apply to clean, dry paintwork in a light circular motion, leaving a thin even layer on all painted surfaces. Do not over apply as this may make the wax difficult to buff later. Do not apply to unpainted rubber or unpainted plastic trim.
3. Leave wax film to dry on the surface for 10 - 15 minutes. Buff to a high gloss with the supplied Hi-Tech Finishing Cloth, turning it frequently during use. 4. To maintain the finish, wash regularly with Ultra High Definition Shampoo. It will remove dirt but not the Ultra High Definition Wax.
After use, wash the applicator in a mild detergent, rinse and allow to air dry.
Unsuitable for matte paint.
FAQs: Q: What is Ultra High Definition Wax? A: Ultra High Definition Wax is the result of countless hours of meticulous development in our state-of- the-art laboratories to produce our most luxurious wax finish yet. We understand the pleasure of standing back to admire a truly immersive, deeper gloss finish. It’s why Ultra High Definition Wax blends the finest ingredients, including Carnauba, to go beyond showroom shine to a whole new level of finish.
Q: How is Ultra High Definition Wax different from High Definition Wax? A: Our Research & Development team continue to develop new formulations with the latest technologies and raw materials available. Our new Ultra High Definition wax not only generates an even deeper shine, but its softer composition makes it easier to apply and buff. We have also developed a new ergonomic applicator to further ease application of the wax.
Q: Does Ultra High Definition Wax contain Carnauba Wax? A: The original High Definition Wax contained Carnauba Wax. Ultra High Definition Wax contains a different, purer organically refined grade of Carnauba Wax.
Q: Can I layer Ultra High Definition Wax? A: Yes. The wax can easily be layered to offer increased protection. If you are looking for increased protection it is important that you apply thin layers of wax than one thick layer of wax. Application and removal becomes significantly more challenging if you apply too much wax. A thin layer is all that is required.
Q: Is it ok to apply Ultra High Definition Wax on top of Super Resin Polish or Ultra Deep Shine? A:Yes. We would encourage you polish your paintwork with Super Resin Polish in advance of Ultra High Definition Wax to ensure it is in excellent condition prior to waxing. However, we do not recommend Ultra High Definition Wax is used on top of Ultra Deep Shine.
Q: Can I apply Ultra High Definition wax on top of Extra Gloss Protection? A: There is no real benefit to adding this stage to your car care process. Using Ultra high Definition Wax on top of Extra Gloss Protection will only enhance durability marginally. It won’t harm the finish, but we do not recommend using Ultra High Definition Wax in conjunction with Extra Gloss Protection. It is an alternative way of waxing and protecting your paintwork.
Q: How do I wash the Ultra High definition Wax applicator? A: Firstly remove any excess wax, and then wash with warm water and a small amount of mild detergent. Rinse thoroughly and then allow to air dry. If machine washing, wash separately from clothing.
Aug 26 2016, 01:55 PM
Quote
0.0293sec
0.96
6 queries
GZIP Disabled