Bolt on turbo service for most type of car.

Our bolt on package are included items below :

Turbine ( half cut /recons / or new ) depends on customers request.
Custom 304 Stainless Steel Turbo Manifold
Custom Turbo Downpipe
Exhaust Thermal warp (aerospeed)
Blow off valve
Oil Catch tank
Digital Boost Meter
Mechanical Boost Controller (Aerospeed)
Inter cooler ( half cut / new ) depends on customers request.
Custom inter cooler and intake piping.
Intake Air filter ( simota / knn / or any customers choice )
Turbo pressure hose / etc
Air flow adapter

*All intake piping, inter cooler piping, turbo piping, turbo manifold are using 304 stainless steel, we only use mandrel bend elbow, welding part are done with TIG and polished finish surface.

Optional upgrade and choices :

ATF cooler
Oil cooler
Oil adapter relocation kit
Turbo exhaust system ( All from Australia )

Because all car are different, and some owner have additional add on in engine bays, so we prefer to deal with the price after we see your car.

We are base in Cheras and Kajang area
Below was our facebook page
Facebook

Any further inquiry u may pm us, left down comment, find us in facebook, or contact 01112379761 Yewly

One of our bolt on turbo, on 1.5L almera Stock engine.http://www.youtube.com/watch?v=2CSoTqtnOt4&feature=youtu.be

Hi, PM me package for civic 08 k20a

Hello there, for k20a, we prefer upgrade compression, camshaft, stroker kit and so on, it is better staying at NA than bolt on turbo or super charger =)...
Alot of people had proven that, k20a is much suitable for NA mod.

If u do need more information, u may find us at Facebook
Or 01112379761

Haha, that's a very honest opinion ...

We don`t waste customer money for nothing, for useless or upgrade with is not worth it, better not doing it =)
We prefer customer pay their money for max gain, which is much worthy.
That is how we did our job.

Hi. Perodua Kenari possible ?

Can bolt on and upgrade, but a YRV engine much suitable.

I would like to convert my current myvi 1.3 auto 2006 to YRV turbo.

Pm me the detail and price please, thanks

This post has been edited by sengko: Oct 29 2014, 08:56 PM

Possible to BOT suzuki alto 2010 auto?

how much is the current set up for BOT for almera as per your video including all parts and labour charges

thanks

pm for cx-5

Yes, its possible, but we will need to see the car first to know how much roughly it cost.

Some of the part for the almera which in the video are out of stock, if u want a roughly figure, u will need to come shop for quotation.

All piping include exhaust are stainless steel

Basic bolt on turbo package for most car are roughly 6k, which include :

Manifold
Intercooler
Piping
Open pod Air filter : Different brand and price available
Boost meter : Different brand and price available
Blow off valve : Different brand and price available
Manual Boost controller :
Turbo (half cut) : Different spec and price available
Down pipe
New exhaust system : Different brand and price available

nice, will let u know once i can meet u.. the car still in terengganu

U may contact us in our facebook page, or direct contact me : 01112379761

Hi, can PM me rough pricing for BOT on Forte 2.0? TQ

how about management ? most idle to boost 0.4bar ?

Forte are harder, because the ecu, Which might cost u about 15k++ hardware part roughly 7~9k rest are all management

OUr bolt on are run at turbine internal wastegate minimal boost, it will be 0.4~0.7 depends on the turbo.

so no management ?

Must have a engine management to run a/f ratio and ignition timing, but the boost are not control by the management, will have a boost controller, or a electronic boost controller.

Can you check new mitsubishi mirage package.

Never did mirage, need to inspect the car first.

Do possible to reconfig turbo comes as early 1400rpm for Exora CFE.. any pro and cons...

No... because currently, we only able to adjust cfe a/f ratio, can`t do any ignition adjustment.
Means we can`t do big mod for the car yet.

This post has been edited by yewly1990: Jan 21 2015, 10:24 PM

Hi. Pm me package for vios ncp93. Thx

how about r18a?

Hello there, basic package, about 9~10k

*New Tonnka Manifold

*Recondition Custom hybrid turbo, by Tong Turbo (not half cut)

*Whole new fully stainless steel exhaust system, ( all TIG welding )
1 muffler / 1 bullet, custom inlet size special order from Australia.

*Knn or simota open pod filter.

*New intercooler, all intake and intercooler piping will be stainless steel

*Emanage Blue included tuning


All item could be upgrade in future with minor mod.