Roger that.

Le Gadgets.

anyone have an ipv2 for sale?

memang clone takleh pakai 0.3 bro.

kalau dah pakai hana, tak payah pakai 0.3 dah la. ko pakai 2 ohm pon, kalo set 30W, end result jadi 30W gak.






XXIX mod is damn powerful wei!

the top cap of the mod has a passthru, so your batteri touches the bottom screw of your tank straight. memang power and sedap

that cloud chimp sedap ka ?

Hello vapers, newb face a bit problem with setup.

My current setting is micro coil, 26 awg 6 wraps on a screwdriver with kfl, probably 1.3ohm +/-. Powered by chiyou.

I dont have problem with fruit flavor. But with kopi/custard, i will have a few bad puff before smooth inhales. Means for first few inhale, i experiences choke, very dry inhale. After that, i can vape smoothly without problem

For this case, should i reduce the ohm by reducing wraps? Increase/decreasing diameters of wraps? Thanks in advanced

bro, u sure not 1.3ohm?

my setup 28awg 8 wraps pun baru 1.3ohm..

26awg 6 wraps max also 0.8ohm..

this type of liquid, sometimes it needs to carbonize the coil before the flavor shines but i never had that experience before..

hi uolls

bila dah lama pakai chiyou, banyak parts dia yang dah kotor sampai susah nak remove, so voltage tak sampai.

pastu pakai mod passthru ni cam sedap gile lak. vape @ 3.5v pon still power

Kerjah .. kerjah ...

Bro pakai hybrid connector nie battery x lemas ke .. hehehe.

This post has been edited by defcon-7: Nov 3 2014, 10:50 AM

tu la, ako sceptical gak at first. takut la gak. but so far memang mantap firing dia

basically kalau tertekan without mod, memang keluar api la.... gile dangerous kalau letak kat bag.

firing button takleh lock. tapi memang kecik gile, tak macam cik ayu

26AWG 6 wraps microcoil @ 1.3ohms? you sure about that bro? It looks more like a subohm to me, which is IMHO unsuitable for Kayfuns.

The dry inhale is mainly due to your wicking (most creamy liqs are high in VG this harder to be absorbed), it could be too thick that it chokes the coil, or too thin that it doesn't wick fast enough. I think its the former.

Ok thx for the suggestion..

For the ohm, just wild guess.. no tester so pls forgive my ignorance.

subohm on a kayfun?
Correct me if im wrong. But wouldnt it get super hot due to the small chamber?

yes it would, and it could melt the insulator which is why it is not recommended for subohms in any kayfuns.

Im damn kedekut to buy that ohm reader thingy. How much does it usually cost? Saw one at Kota Damasnara..rm50

kat fasttech murah la

and lagi cantik than the ones available here