QUOTE(LanEvoX @ Sep 18 2014, 09:37 AM)
check the alignment results on the machine first.. dun simply simply go change the camber bolt.... maybe the angle off slightly one side only..
Have you ever kena con dgn kedai tayar?, Yesterday
Have you ever kena con dgn kedai tayar?, Yesterday
|
|
Sep 18 2014, 10:28 AM
Return to original view | Post
#1
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
9,206 posts Joined: Jun 2006 |
|
|
|
Sep 18 2014, 10:46 AM
Return to original view | Post
#2
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
9,206 posts Joined: Jun 2006 |
QUOTE(cikalakacikaci @ Sep 18 2014, 10:12 AM) guys, if i change rear tyre coz got kembung (dont know what to call it) tokey ask me to change both rear tyre coz he said wont balance if change one oni, is that normal ?or kana tipu depends on the rear tire worn off or not?inb4 i noob if baru change few mths, dun say go spend to change both meh? |
|
|
Sep 18 2014, 10:48 AM
Return to original view | Post
#3
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
9,206 posts Joined: Jun 2006 |
QUOTE(iskazulka @ Sep 18 2014, 10:38 AM) this due to different wear rate between front and rear tires... it's normal to change 2pieces at the time, of cos if you feeling rich.. can change all 4..not balance means not balance of traction. different tyre models got different traction. should have same traction tyres for either front or back. better should same for all tyres. poorfags like us only change 1 pair for front or back. |
|
|
Sep 18 2014, 10:56 AM
Return to original view | Post
#4
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
9,206 posts Joined: Jun 2006 |
QUOTE(cikalakacikaci @ Sep 18 2014, 10:54 AM) then time to change lor.. if kedekut, check your spare tire is still brand new or not? can use it and buy one new same brand as spare tire, then you have 2 pieces of new tire already.. the old tire use back as spare tire since u say bunga still cantik.. This post has been edited by ar188: Sep 18 2014, 10:57 AM |
|
|
Sep 18 2014, 11:10 AM
Return to original view | Post
#5
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
9,206 posts Joined: Jun 2006 |
QUOTE(leongcp @ Sep 18 2014, 11:02 AM) Camber bolt / screw = highest con % by nearly all tyre shops. New cars don't come with this for many year oledi. Totally unnecessary unless kaw kaw bang bump or longkang. most cars now cannot adjust camber especially macpherson design struts... but doesnt mean they are aligned perfect out from factory..some got lari 1-2% on one side wan..Brake pad, brake disc skim, brake hose, air cond pipe, mostly con tactics by tyre shop |
|
|
Sep 18 2014, 11:15 AM
Return to original view | Post
#6
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
9,206 posts Joined: Jun 2006 |
QUOTE(call me random @ Sep 18 2014, 11:12 AM) My worst exp almost kena con when I wented for service at yindian shop in equine. Never been there I hungry after work lazy to go around to regular workshop. so hands on DIY girl.. wow.. Long story cut short, when I'm about to drive out after say tq bos.. I noticed unusual shakes like in the engine part.. Then they said this one mounting prob must check mounting n do samting. I tiaw them lar i said bos it was all ok before this never shaken so much.. He then check back turned out that spark plug cable idk what u call not put back properly. My last time there. And another.. Din put back the oil dipstick i only notice like few days after. Cant rmb which plc since i move around a lot. So after anybody touch the car ill make sure i check back myself. And one more accesories shop in skudai..i change the rear light paid extra ten bucks for installation n found out they din put the lights in. I change bulb myself also after tat incident.. Shud ask for refund |
|
|
Sep 18 2014, 12:32 PM
Return to original view | Post
#7
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
9,206 posts Joined: Jun 2006 |
|
| Bump Topic Add ReplyOptions New Topic |
| Change to: | 0.0179sec
0.30
6 queries
GZIP Disabled
Time is now: 3rd December 2025 - 04:42 AM |