Any k/ got bad experience with kedai tayar?
Have you ever kena con dgn kedai tayar?, Yesterday
Have you ever kena con dgn kedai tayar?, Yesterday
|
|
Sep 18 2014, 09:30 AM, updated 12y ago
Show posts by this member only | Post
#1
|
![]() ![]()
Junior Member
62 posts Joined: Jan 2009 From: PJ |
Yesterday tukar brake pad, after bukak the mechanic buat muka serius kata ini itu ini itu kena tukar. Which some of it is still new
Any k/ got bad experience with kedai tayar? |
|
|
Sep 18 2014, 09:31 AM
Show posts by this member only | Post
#2
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,848 posts Joined: Dec 2009 From: Ampang |
Camber. Ah typical
|
|
|
Sep 18 2014, 09:32 AM
Show posts by this member only | Post
#3
|
![]() ![]()
Junior Member
120 posts Joined: Aug 2013 |
ni machiam punya kedai belambiak bro.
con ppl = great wealth |
|
|
Sep 18 2014, 09:32 AM
Show posts by this member only | Post
#4
|
![]() ![]()
Junior Member
62 posts Joined: Jan 2009 From: PJ |
|
|
|
Sep 18 2014, 09:34 AM
Show posts by this member only | Post
#5
|
![]()
Junior Member
49 posts Joined: Nov 2010 |
yeah, there is 1 shop in bangi S15, this tyre shop will say this rosak have to change, this not good have to change, i also kena tipu, go there change my 4wd tyre, i asked the shop to do allignment + chamber, after 4 months both my front type completely worn out on the inside , wth 4 months of use, thats the last time i go there
|
|
|
Sep 18 2014, 09:35 AM
Show posts by this member only | Post
#6
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
7,938 posts Joined: Mar 2014 |
QUOTE(Donphatz @ Sep 18 2014, 09:30 AM) Yesterday tukar brake pad, after bukak the mechanic buat muka serius kata ini itu ini itu kena tukar. Which some of it is still new You should go to the workshop you're familiar with.Any k/ got bad experience with kedai tayar? You should have ask yourself what kind of screw so expensive |
|
|
Sep 18 2014, 09:35 AM
Show posts by this member only | Post
#7
|
![]() ![]()
Junior Member
86 posts Joined: Jun 2007 |
Camber usually how much ah?
|
|
|
Sep 18 2014, 09:36 AM
Show posts by this member only | Post
#8
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,772 posts Joined: Jan 2003 |
ownself have to know a little bit sometimes, if not go back service centre, at least if change this and change that are original parts and can go back fucuk upside down if didn't do good job
|
|
|
Sep 18 2014, 09:37 AM
Show posts by this member only | Post
#9
|
![]()
Newbie
4 posts Joined: Jul 2014 |
yup
last time they ask me to tukar tayar he said no bunga LOL tayar where got bunga so I just left |
|
|
Sep 18 2014, 09:37 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,452 posts Joined: Jan 2003 From: anywhere |
|
|
|
Sep 18 2014, 09:38 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,974 posts Joined: Dec 2007 From: Gotham City |
not con but i stress coz of their laziness
went n do rotation, alignment n balancing last year. usually tyre shop use manual pressure gauge so pressure in tyre wont be 100% even. so i usually go home n check myself d next day. i discovered that one of my tyres was 5 psi lower den d rest. 1st thought was of a leak in d tyre. stress wei coz d tyres were only a year old went back to the shop n they check for me. no leaks. they inflated the tyre n d anxious wait started again. all was fine. i guess d tyre fele forgot to inflate dat tyre after doing the balancing LOL |
|
|
Sep 18 2014, 09:40 AM
|
![]() ![]()
Junior Member
189 posts Joined: May 2012 |
QUOTE(turbojunkies @ Sep 18 2014, 09:34 AM) yeah, there is 1 shop in bangi S15, this tyre shop will say this rosak have to change, this not good have to change, i also kena tipu, go there change my 4wd tyre, i asked the shop to do allignment + chamber, after 4 months both my front type completely worn out on the inside , wth 4 months of use, thats the last time i go there haha i know that shopsend for balancing, before send 120kmh steering shaking after they do balancing 80kmh already shake This post has been edited by marumaru: Sep 18 2014, 09:40 AM |
|
|
Sep 18 2014, 09:41 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,432 posts Joined: Apr 2010 |
|
|
|
Sep 18 2014, 09:42 AM
|
![]() ![]()
Junior Member
86 posts Joined: Jun 2007 |
|
|
|
Sep 18 2014, 09:42 AM
|
![]() ![]()
Junior Member
62 posts Joined: Jan 2009 From: PJ |
QUOTE(LanEvoX @ Sep 18 2014, 09:37 AM) refer to this topic https://forum.lowyat.net/topic/2349595/all i tukar 1 side RM80. then after reading this topic mmg menyumpah kaw kaw. |
|
|
Sep 18 2014, 09:43 AM
Show posts by this member only | IPv6 | Post
#16
|
![]()
Junior Member
22 posts Joined: Feb 2013 |
QUOTE(Donphatz @ Sep 18 2014, 09:30 AM) Yesterday tukar brake pad, after bukak the mechanic buat muka serius kata ini itu ini itu kena tukar. Which some of it is still new i kena from Weng Hing at kota kemuning shah alam. Any k/ got bad experience with kedai tayar? confirm on tyre price, but when go there replc... change this la change that la if not cannot pakai la. then extra 2-4% use CC or debit card. first time last time. |
|
|
Sep 18 2014, 09:44 AM
|
![]() ![]() ![]()
Junior Member
316 posts Joined: Mar 2014 |
QUOTE(Donphatz @ Sep 18 2014, 09:30 AM) Yesterday tukar brake pad, after bukak the mechanic buat muka serius kata ini itu ini itu kena tukar. Which some of it is still new i went to kedai tayar 10 times. 10 times also kena tipu.... Thats why when there is a potential of 'negotiable' business involve, i always avoid. You nego-nego means the price not fix. Example like the chamber skru. That one small piece of skru is like RM8.90 and how come it can be priced at RM80!!? that is 1000% more! logic? there no logic in business (nego). Only insane profit margin.Any k/ got bad experience with kedai tayar? |
|
|
Sep 18 2014, 09:45 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,907 posts Joined: Jan 2005 From: Pahang |
If you go to kedai tayar, you must bring extra cash. When they take out the tyre, lots of thing must change if according to them.
But luckily after a few changes of tyre, I found a good shop. |
|
|
Sep 18 2014, 09:45 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,452 posts Joined: Jan 2003 From: anywhere |
QUOTE(Donphatz @ Sep 18 2014, 09:42 AM) refer to this topic syukur i change back to standard suspension, no need camber screw now https://forum.lowyat.net/topic/2349595/all i tukar 1 side RM80. then after reading this topic mmg menyumpah kaw kaw. |
|
|
Sep 18 2014, 09:46 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
6,240 posts Joined: Jul 2005 |
There's a tyre shop in Garage Sales under Automobiles.
His price very cheap. |
|
|
Sep 18 2014, 09:46 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,061 posts Joined: Jan 2003 |
|
|
|
Sep 18 2014, 09:47 AM
|
![]() ![]()
Junior Member
62 posts Joined: Jan 2009 From: PJ |
|
|
|
Sep 18 2014, 09:47 AM
|
![]() ![]() ![]()
Junior Member
440 posts Joined: Jan 2011 |
Tayar kereta pancit bulan lepas. Alang2 dua2 tayar depan memang da patut kena tukar, so pergi je la kedai tayar.
Aku da la tak tau langsung pasal kereta, n mamat tu (bangla) memang nak ketuk kaw2. Dia cakap rim kereta senget la apala, aku layankan je. Dia cakap ada promotion utk rim, aku cakap tak nak haha. Tak habis lagi, dia cakap skru pun kena tukar, kalau tak nanti tayar takde waranti. Macam haram betul, aku cakap nak beli tayar depan je, benda lain taknak. Even tak tau apa2, kena tegas dengan diorg ni bro. Takpun at least kau bawak membe kau yg power pasal kereta. Takde kena kencing hidup2 |
|
|
Sep 18 2014, 09:47 AM
|
![]() ![]() ![]()
Junior Member
366 posts Joined: Nov 2007 From: Sin City |
camber skru tak perlu tukar pun actually
lainla kalau kau bawak kereta rally |
|
|
Sep 18 2014, 09:48 AM
|
![]()
Junior Member
12 posts Joined: Mar 2014 |
last time i bodoh pergi tukar 1 camber skru sebelah saja.
so macam mana? kene tukar stok balik ke? |
|
|
Sep 18 2014, 09:49 AM
|
![]() ![]()
Junior Member
62 posts Joined: Jan 2009 From: PJ |
|
|
|
Sep 18 2014, 09:50 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,772 posts Joined: Jan 2003 |
|
|
|
Sep 18 2014, 09:51 AM
|
![]() ![]() ![]() ![]()
Senior Member
572 posts Joined: Sep 2007 |
QUOTE(Donphatz @ Sep 18 2014, 09:30 AM) Yesterday tukar brake pad, after bukak the mechanic buat muka serius kata ini itu ini itu kena tukar. Which some of it is still new I will countinue to cheat ppl like U. No ppl will believe UAny k/ got bad experience with kedai tayar? Last year only RM50, now RM80 |
|
|
Sep 18 2014, 09:51 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,452 posts Joined: Jan 2003 From: anywhere |
QUOTE(Donphatz @ Sep 18 2014, 09:49 AM) Mine is standard suspension and they guy say kena tukar. I was noob and rushing at the time. Now everytime they suggest do alignment and balancing i say NO. dunno la, my car wira. when change from standard to adjustable, the shop said i need camber nut, RM80 so now poorfar liao, i use back standard suspension, dint ask me to change the nuts liao This post has been edited by LanEvoX: Sep 18 2014, 09:52 AM |
|
|
Sep 18 2014, 09:53 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
All Stars
15,182 posts Joined: Jan 2003 From: Damansara Heights |
only replace parts when is major.
|
|
|
Sep 18 2014, 09:54 AM
|
![]() ![]()
Junior Member
158 posts Joined: Dec 2009 |
went to tyre shop to change 1 tyre coz got leak at the valve. end up changing all 4 tyres...haish..
|
|
|
Sep 18 2014, 09:55 AM
|
![]() ![]() ![]() ![]()
Senior Member
572 posts Joined: Sep 2007 |
Yeah each time go to tyre shop SURE add Camber SCREWs , after few years got 20overs Camber screws installed , true ahh?
|
|
|
Sep 18 2014, 09:58 AM
|
![]() ![]() ![]() ![]() ![]()
Senior Member
937 posts Joined: Jun 2006 |
|
|
|
Sep 18 2014, 10:00 AM
|
![]()
Junior Member
9 posts Joined: Jun 2010 From: soviet sarawak |
QUOTE(turbojunkies @ Sep 18 2014, 09:34 AM) yeah, there is 1 shop in bangi S15, this tyre shop will say this rosak have to change, this not good have to change, i also kena tipu, go there change my 4wd tyre, i asked the shop to do allignment + chamber, after 4 months both my front type completely worn out on the inside , wth 4 months of use, thats the last time i go there sudah ban that shop. manyak tipu.This post has been edited by no0b: Sep 18 2014, 10:00 AM |
|
|
Sep 18 2014, 10:02 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,058 posts Joined: Mar 2011 From: Today: 9:03 AM |
QUOTE(qwerty79 @ Sep 18 2014, 09:45 AM) If you go to kedai tayar, you must bring extra cash. When they take out the tyre, lots of thing must change if according to them. It's true but there is this one particular shop, my friend's kedai but his workers are the one fixing my car (he's 22 only this year, dah travel around the world sponsored by Continental, me jelly~~~~~) But luckily after a few changes of tyre, I found a good shop. remove RIM, tell me this that cannot but they won't fix. They only check for us to inform if there is any problem. I've frequent his shop then onwards cos I know they won't simply chop people. They prefer giving advise |
|
|
Sep 18 2014, 10:02 AM
|
![]()
Junior Member
40 posts Joined: Jan 2012 |
QUOTE(rcracer @ Sep 18 2014, 09:36 AM) ownself have to know a little bit sometimes, if not go back service centre, at least if change this and change that are original parts and can go back fucuk upside down if didn't do good job talk so big like c0ck herewhen face to face with the real situation, macam tikus after kena, go FB say boikot this and that your type always like that, talk big on the internet |
|
|
Sep 18 2014, 10:03 AM
|
![]()
Junior Member
23 posts Joined: Mar 2006 From: East Coast of Cuba. |
QUOTE(marlick25 @ Sep 18 2014, 09:47 AM) Tayar kereta pancit bulan lepas. Alang2 dua2 tayar depan memang da patut kena tukar, so pergi je la kedai tayar. Avoid shop with bangla. They will try kipas kaw2 infront his boss to show he is good. My friend go workshop with bangla worker also kena like that. Ask to change unrelated thing.Aku da la tak tau langsung pasal kereta, n mamat tu (bangla) memang nak ketuk kaw2. Dia cakap rim kereta senget la apala, aku layankan je. Dia cakap ada promotion utk rim, aku cakap tak nak haha. Tak habis lagi, dia cakap skru pun kena tukar, kalau tak nanti tayar takde waranti. Macam haram betul, aku cakap nak beli tayar depan je, benda lain taknak. Even tak tau apa2, kena tegas dengan diorg ni bro. Takpun at least kau bawak membe kau yg power pasal kereta. Takde kena kencing hidup2 |
|
|
Sep 18 2014, 10:04 AM
|
![]() ![]()
Junior Member
81 posts Joined: Jul 2011 |
kena buat list ni all the blacklisted shop. TS? could help?
|
|
|
Sep 18 2014, 10:06 AM
|
![]() ![]() ![]() ![]()
Senior Member
572 posts Joined: Sep 2007 |
Shop name also TS didn't recealed, k/tard believe him
|
|
|
Sep 18 2014, 10:07 AM
|
![]() ![]() ![]() ![]() ![]()
Senior Member
852 posts Joined: Apr 2012 |
I go to seri kembangan. Continental shop along the main road. They do balancing old skool way, while tyre still on ur car. Didnt even ask to change chamber nut. N their shop tyre is cheaper compared to other shops in that area. I bought conticomfirt, other shops quote rm20-rm30 more then that shop
|
|
|
Sep 18 2014, 10:10 AM
|
![]() ![]() ![]()
Junior Member
347 posts Joined: Nov 2013 |
Last time when I work in Kelantan also kena con by a shop that looks so grand with high tech stuff. A few month later, have to get it repaired so later on I decided to send my car to a kampung tyre shop in Kubang Kerian where he adjust chamber, alignment using string and ruler. Before changing here and there, he will test drive first with you sitting at the passenger seat so that he can feel what is wrong with the car. Then only he starts repairing. So old school but that is the most trusted and reliable tyre shop i've gone to in Kelantan. Thumbs up!
|
|
|
Sep 18 2014, 10:12 AM
|
![]() ![]()
Junior Member
107 posts Joined: Jun 2013 From: kl.klang. |
guys, if i change rear tyre coz got kembung (dont know what to call it) tokey ask me to change both rear tyre coz he said wont balance if change one oni, is that normal ?or kana tipu
inb4 i noob |
|
|
Sep 18 2014, 10:15 AM
|
![]() ![]()
Junior Member
56 posts Joined: Jun 2011 |
QUOTE(cikalakacikaci @ Sep 18 2014, 10:12 AM) guys, if i change rear tyre coz got kembung (dont know what to call it) tokey ask me to change both rear tyre coz he said wont balance if change one oni, is that normal ?or kana tipu usually change both tyre.. either front or back.. if not.. not balance... inb4 i noob |
|
|
Sep 18 2014, 10:15 AM
|
![]() ![]()
Junior Member
248 posts Joined: Aug 2011 |
this one need ask from /k/ sifu.. recommend good shops..
|
|
|
Sep 18 2014, 10:23 AM
|
![]() ![]()
Junior Member
62 posts Joined: May 2012 |
|
|
|
Sep 18 2014, 10:26 AM
|
![]() ![]() ![]()
Junior Member
453 posts Joined: Feb 2014 |
Same, went to my regular workshop but they are off so went to next door shop and terus need to replace chamber screw RM 50 a piece buta2 kena potong. Btw, the shop is call TOP SPEED.
Even recently go to my regular workshop due to clutch issue they check check also told me your absorb bar no good, engine mount kong, some oil filter ring need change, etc, from verbal quote of RM 600 suddenly shoot up to 1k +. I told them thank you but no thanks because I have no money. Still they replace my gear oil without asking me and bill me terus. Sometime I really hope to go take a course of car repair & DIY. |
|
|
Sep 18 2014, 10:26 AM
|
![]() ![]()
Junior Member
248 posts Joined: Aug 2011 |
QUOTE(iskazulka @ Sep 18 2014, 10:23 AM) tq. bookmarked for future reference. |
|
|
Sep 18 2014, 10:27 AM
|
![]() ![]() ![]()
Junior Member
343 posts Joined: Jul 2011 From: Land of SaberLion :3 |
con....not chop meh???
|
|
|
Sep 18 2014, 10:28 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
9,206 posts Joined: Jun 2006 |
|
|
|
Sep 18 2014, 10:31 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,668 posts Joined: Jun 2006 From: Bikini Abyss |
got one shop i went at puncak jalil.
this uncle got view-view said the klunk-klunk noise is due to broken output shaft. turn out he's correct and he din ask for anything for his expert opinion. i shed tears. |
|
|
Sep 18 2014, 10:31 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,772 posts Joined: Jan 2003 |
QUOTE(tontolou @ Sep 18 2014, 10:02 AM) talk so big like c0ck here why so serious bro?when face to face with the real situation, macam tikus after kena, go FB say boikot this and that your type always like that, talk big on the internet wrong ah that owner should know a little bit basic of their own cars and not just trust what mechanics say 100% if go SC when unsure also wrong ah? you forgot to eat ubat today? bodo |
|
|
Sep 18 2014, 10:34 AM
|
![]()
Newbie
3 posts Joined: Jun 2006 |
Camber skru one time tuka only. Front right and left. Some cars comes with the one can be adjust. Some car tak boleh adjust. So all u need is to remember which one belum tuka. Left or right. If sudah tukar dua2. U kasitau la sudah tukar. U kasi adjust saja maaa. Lagi mau tukar apa pasat? Rosak? Niamahhh. Itu skru xboleh rosak mia. Itu skru tada kena apa wear n tear lagi mau tukar. Kasi tukar satu keleta mia skru la itu machiam. Kanninahhh
|
|
|
Sep 18 2014, 10:38 AM
|
![]() ![]()
Junior Member
62 posts Joined: May 2012 |
QUOTE(cikalakacikaci @ Sep 18 2014, 11:12 AM) guys, if i change rear tyre coz got kembung (dont know what to call it) tokey ask me to change both rear tyre coz he said wont balance if change one oni, is that normal ?or kana tipu thisinb4 i noob QUOTE(Black2690 @ Sep 18 2014, 11:15 AM) not balance means not balance of traction. different tyre models got different traction. should have same traction tyres for either front or back. better should same for all tyres.poorfags like us only change 1 pair for front or back. |
|
|
Sep 18 2014, 10:40 AM
|
![]() ![]() ![]()
Junior Member
432 posts Joined: Apr 2009 |
sbenarnyakan ko kena pergi Bengkel Membe2....
Aku dulu pernah gak jadi mcm ko nih, Mekanik tu yang pasang timing belt aku tak ketat dia salahkan pulley aku pulak, dia suruh tukar baru... Aku rasa pulley aku elok je selama aku pakai takde masalah, sejak tukar timing belt dia buat hal... Aku pun refer kat bengkel lain; "Abg buat kete lama dah, abg tengok kete ko ok jer, dia yang buat tak betul, ko xyah tukar apa2, meh abg tlg ketatkan timing belt ko" SO MORAL OF THE STORY DONT REFER TO ONLY 1 WORKSHOP, TRY TO SEEK OPINION FROM OTHER WORKSHOP.. BTW kawan aku ada buat service repair kete kat rumah dia area Subang Jaya, siapa nak hantar or nak enquiry apa2 boleh la pm aku bg contact |
|
|
Sep 18 2014, 10:40 AM
|
![]()
Junior Member
40 posts Joined: Jan 2012 |
|
|
|
Sep 18 2014, 10:44 AM
|
![]() ![]() ![]() ![]()
Junior Member
693 posts Joined: Dec 2009 From: Italy |
go to service center like toyota and honda also the same.... when come to max check rosak tak rosak also tukar... and the charges is more expensive than outsite
|
|
|
Sep 18 2014, 10:45 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,176 posts Joined: May 2013 From: Petaling Jaya |
|
|
|
Sep 18 2014, 10:46 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
9,206 posts Joined: Jun 2006 |
QUOTE(cikalakacikaci @ Sep 18 2014, 10:12 AM) guys, if i change rear tyre coz got kembung (dont know what to call it) tokey ask me to change both rear tyre coz he said wont balance if change one oni, is that normal ?or kana tipu depends on the rear tire worn off or not?inb4 i noob if baru change few mths, dun say go spend to change both meh? |
|
|
Sep 18 2014, 10:48 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
9,206 posts Joined: Jun 2006 |
QUOTE(iskazulka @ Sep 18 2014, 10:38 AM) this due to different wear rate between front and rear tires... it's normal to change 2pieces at the time, of cos if you feeling rich.. can change all 4..not balance means not balance of traction. different tyre models got different traction. should have same traction tyres for either front or back. better should same for all tyres. poorfags like us only change 1 pair for front or back. |
|
|
Sep 18 2014, 10:49 AM
|
![]() ![]() ![]() ![]()
Senior Member
624 posts Joined: Jan 2003 |
one thing i notice on perodua...their normal service in total is considered cheaper than outside shop...
outside shop quote me normal service with semi synthetic(7000km) range from RM120-160 peerodua quoted me semi synthetic(10000km) rm140...samoer got free drinks and aircond... |
|
|
Sep 18 2014, 10:54 AM
|
![]() ![]()
Junior Member
62 posts Joined: May 2012 |
word of wisdom from my fellow sifu :
QUOTE(davidke20 @ Jun 19 2012, 08:19 PM) Darling, drive your car to flat gloss ground, such as Mid Valley parking lot and listen to your tyre on straight line. If can hear screeching sound, most probably alignment out. Normal computer alignment cost RM15 and that's it. Don't let them con you to add something camber screw lar, adjust camber lar. Those are nonsense until you hit a pothole hard and bent your lower arm, otherwise those camber adjustment are just a way they pitch for more profit. Bad camber is something like this ![]() Bad alignment is this ![]() Normally, besides of steering bush, bad alignment will also result in steering numb/turning back slow after cornering. I assume you're not an hard arse that corner like me, your bush should still fine as your car only 1 month old. Steering bush is an wear & tear item, normal driving condition can last up to 2 years, the more parallel parking you do, the faster it die. Died"ed" steering bush normally you'll feel significant numb on steering feedback. For example after steering full turn during reverse, if you put it to forward and step on the gas, the steering will auto correct itself; as for bad steering bush your steering will stick to full turn and continue make donut when you step on the gas. Bad alignment vehicle normally give numb feedback because the wheel not agreeing on the straight line, after steering full turn already, both wheels tend to rejecting each other instead of agreeing. |
|
|
Sep 18 2014, 10:54 AM
|
![]() ![]()
Junior Member
107 posts Joined: Jun 2013 From: kl.klang. |
|
|
|
Sep 18 2014, 10:55 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,167 posts Joined: May 2009 |
QUOTE(Donphatz @ Sep 18 2014, 09:30 AM) Yesterday tukar brake pad, after bukak the mechanic buat muka serius kata ini itu ini itu kena tukar. Which some of it is still new same here, con me chamber screw for myvi, RM75 per piece.Any k/ got bad experience with kedai tayar? And say two half botak tyre as already botak, urge me to change luckily dad came to rescue. that was like 5 years ago |
|
|
Sep 18 2014, 10:56 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
9,206 posts Joined: Jun 2006 |
QUOTE(cikalakacikaci @ Sep 18 2014, 10:54 AM) then time to change lor.. if kedekut, check your spare tire is still brand new or not? can use it and buy one new same brand as spare tire, then you have 2 pieces of new tire already.. the old tire use back as spare tire since u say bunga still cantik.. This post has been edited by ar188: Sep 18 2014, 10:57 AM |
|
|
Sep 18 2014, 10:56 AM
|
![]() ![]() ![]()
Junior Member
423 posts Joined: May 2014 |
QUOTE(bluestolks @ Sep 18 2014, 09:42 AM) Bekas presiden Umno itu berkata lebih mengecewakannya, kaum Melayu tidak bersikap jujur dan amanah serta terlalu mementingkan wang berbanding kaum Cina."Kedua berkenaan kejujuran, ikhlas dan amanah. "Sekarang ini saya ada kedai roti, saya hendak terus terang, saya amat malu kerana di antara pekerja Melayu, Cina dan Myanmar atau mana-mana, pekerja Melayu kadang-kadang kalau tengok duit dia lupa, dia tidak jujur. "Dia nampak duit, kalau boleh sapu, dia sapu. "Orang Cina tidak begini," katanya kepada akhbar Utusan Malaysia edisi Ahad itu. |
|
|
Sep 18 2014, 10:57 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,848 posts Joined: Dec 2009 From: Ampang |
My car pulling to the left go many times alignment balancing still the same how ah
|
|
|
Sep 18 2014, 10:58 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
6,240 posts Joined: Jul 2005 |
![]() Recommended! Just say you're from lowyat forum, kasi u good price. |
|
|
Sep 18 2014, 10:58 AM
|
![]() ![]()
Junior Member
178 posts Joined: Jan 2006 |
|
|
|
Sep 18 2014, 10:58 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,204 posts Joined: Feb 2009 |
|
|
|
Sep 18 2014, 10:59 AM
|
![]() ![]()
Junior Member
62 posts Joined: May 2012 |
|
|
|
Sep 18 2014, 11:00 AM
|
![]() ![]() ![]()
Junior Member
300 posts Joined: Jan 2013 |
QUOTE(payamam @ Sep 18 2014, 10:10 AM) Last time when I work in Kelantan also kena con by a shop that looks so grand with high tech stuff. A few month later, have to get it repaired so later on I decided to send my car to a kampung tyre shop in Kubang Kerian where he adjust chamber, alignment using string and ruler. Before changing here and there, he will test drive first with you sitting at the passenger seat so that he can feel what is wrong with the car. Then only he starts repairing. So old school but that is the most trusted and reliable tyre shop i've gone to in Kelantan. Thumbs up! Alignment using string n ruler? Like pasang window dat one ah?QUOTE(cikalakacikaci @ Sep 18 2014, 10:12 AM) guys, if i change rear tyre coz got kembung (dont know what to call it) tokey ask me to change both rear tyre coz he said wont balance if change one oni, is that normal ?or kana tipu Change a pair, put infront..keep the best as spare tyre..discard the other two.inb4 i noob |
|
|
Sep 18 2014, 11:00 AM
Show posts by this member only | IPv6 | Post
#72
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,109 posts Joined: Jan 2003 From: Damansara Damai, PJ |
|
|
|
Sep 18 2014, 11:00 AM
|
![]() ![]() ![]() ![]() ![]()
Senior Member
875 posts Joined: Jul 2008 From: :hehe: |
yeah... last time noob, kena con camber + balancing + alighment = rm80 dafuq
|
|
|
Sep 18 2014, 11:02 AM
|
![]()
Junior Member
21 posts Joined: Mar 2011 |
Camber bolt / screw = highest con % by nearly all tyre shops. New cars don't come with this for many year oledi. Totally unnecessary unless kaw kaw bang bump or longkang.
Brake pad, brake disc skim, brake hose, air cond pipe, mostly con tactics by tyre shop |
|
|
Sep 18 2014, 11:03 AM
|
![]() ![]() ![]()
Junior Member
387 posts Joined: Jan 2008 |
|
|
|
Sep 18 2014, 11:03 AM
|
![]() ![]() ![]()
Junior Member
383 posts Joined: Nov 2008 From: In front of PC |
Liqui Moly tyre shop at Kota Damansara. Got conned by tauke, he charged me for new camber screws. After paying, i straightaway went out and asked the foreman who did my car, he said camber screw tak tukar pun. Cost me RM70.
What made me stop going, is my friends car sent for an full overhaul at the same shop, a standard waja. He paid RM5k for it. After about a month, got leaking at the gearbox gasket adjoining to the engine. Asked to change since did overhaul there. After interrogating the foreman (without the presence of the tauke), he said not fully overhaul, conrod, piston and whatnot xkeluarkan pun. Sooooo goodbye, im going somewhere else. |
|
|
Sep 18 2014, 11:07 AM
|
![]() ![]() ![]()
Junior Member
387 posts Joined: Jan 2008 |
QUOTE(loki @ Sep 18 2014, 11:00 AM) Yeah, my mechanic uncle told me this camber thing is a way for them to make money coz always need to adjust so dont install camber nut. Adjust 1 side = rm12-rm15 which they only putar putar nut... i never do balancing & alignment for my car, it just a con.there is no need such method in car industry This post has been edited by papaya2: Sep 18 2014, 11:09 AM |
|
|
Sep 18 2014, 11:10 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
9,206 posts Joined: Jun 2006 |
QUOTE(leongcp @ Sep 18 2014, 11:02 AM) Camber bolt / screw = highest con % by nearly all tyre shops. New cars don't come with this for many year oledi. Totally unnecessary unless kaw kaw bang bump or longkang. most cars now cannot adjust camber especially macpherson design struts... but doesnt mean they are aligned perfect out from factory..some got lari 1-2% on one side wan..Brake pad, brake disc skim, brake hose, air cond pipe, mostly con tactics by tyre shop |
|
|
Sep 18 2014, 11:10 AM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,138 posts Joined: Dec 2006 |
that's why for poor ppl like us..
knowledge is KING... just look at lawyer..especially defence lauya ppl pay them a great amount of money because of their knowledge... but sometimes can't do anything la...ppl do cheat just take it as lesson... p/s: every one sure have been conned la.. OR soon to be con... |
|
|
Sep 18 2014, 11:11 AM
|
![]() ![]()
Junior Member
57 posts Joined: Feb 2013 |
QUOTE(aimank_88 @ Sep 18 2014, 11:03 AM) Liqui Moly tyre shop at Kota Damansara. Got conned by tauke, he charged me for new camber screws. After paying, i straightaway went out and asked the foreman who did my car, he said camber screw tak tukar pun. Cost me RM70. bro , this shop is at shoplot nearby uptown KD right ?What made me stop going, is my friends car sent for an full overhaul at the same shop, a standard waja. He paid RM5k for it. After about a month, got leaking at the gearbox gasket adjoining to the engine. Asked to change since did overhaul there. After interrogating the foreman (without the presence of the tauke), he said not fully overhaul, conrod, piston and whatnot xkeluarkan pun. Sooooo goodbye, im going somewhere else. |
|
|
Sep 18 2014, 11:12 AM
|
![]() ![]() ![]()
Junior Member
300 posts Joined: Jan 2013 |
My worst exp almost kena con when I wented for service at yindian shop in equine. Never been there I hungry after work lazy to go around to regular workshop.
Long story cut short, when I'm about to drive out after say tq bos.. I noticed unusual shakes like in the engine part.. Then they said this one mounting prob must check mounting n do samting. I tiaw them lar i said bos it was all ok before this never shaken so much.. He then check back turned out that spark plug cable idk what u call not put back properly. My last time there. And another.. Din put back the oil dipstick i only notice like few days after. Cant rmb which plc since i move around a lot. So after anybody touch the car ill make sure i check back myself. And one more accesories shop in skudai..i change the rear light paid extra ten bucks for installation n found out they din put the lights in. I change bulb myself also after tat incident.. Shud ask for refund :furious: |
|
|
Sep 18 2014, 11:13 AM
|
![]() ![]() ![]()
Junior Member
383 posts Joined: Nov 2008 From: In front of PC |
|
|
|
Sep 18 2014, 11:14 AM
|
![]() ![]()
Junior Member
57 posts Joined: Feb 2013 |
|
|
|
Sep 18 2014, 11:15 AM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
9,206 posts Joined: Jun 2006 |
QUOTE(call me random @ Sep 18 2014, 11:12 AM) My worst exp almost kena con when I wented for service at yindian shop in equine. Never been there I hungry after work lazy to go around to regular workshop. so hands on DIY girl.. wow.. Long story cut short, when I'm about to drive out after say tq bos.. I noticed unusual shakes like in the engine part.. Then they said this one mounting prob must check mounting n do samting. I tiaw them lar i said bos it was all ok before this never shaken so much.. He then check back turned out that spark plug cable idk what u call not put back properly. My last time there. And another.. Din put back the oil dipstick i only notice like few days after. Cant rmb which plc since i move around a lot. So after anybody touch the car ill make sure i check back myself. And one more accesories shop in skudai..i change the rear light paid extra ten bucks for installation n found out they din put the lights in. I change bulb myself also after tat incident.. Shud ask for refund |
|
|
Sep 18 2014, 11:16 AM
|
![]() ![]() ![]()
Junior Member
383 posts Joined: Nov 2008 From: In front of PC |
|
|
|
Sep 18 2014, 11:17 AM
|
![]() ![]()
Junior Member
155 posts Joined: Sep 2012 |
gunalah http://www.carama.com/home
|
|
|
Sep 18 2014, 11:18 AM
|
![]() ![]()
Junior Member
279 posts Joined: Mar 2006 |
QUOTE(iskazulka @ Sep 18 2014, 10:23 AM) +1Went there several times then went elsewhere only to return back. Very good pricing on yokohama tyres. Nice fella to chat with. |
|
|
Sep 18 2014, 11:19 AM
|
![]() ![]() ![]()
Junior Member
300 posts Joined: Jan 2013 |
Other screw tulang anjing pins balancing n whatnot dunno kena con or not since I always showed how a good one is n how mine worn off so much. Its expected anyway.. Not always changed straight away lar.. But if feel or hear something not right I go check also.. If too exp then I asked for seken opinion.. Ol car hv to pamper more anyway..
|
|
|
Sep 18 2014, 11:22 AM
|
![]() ![]()
Junior Member
178 posts Joined: Jan 2006 |
QUOTE(Boy96 @ Sep 18 2014, 10:57 AM) haha they cheated la bro. usually the will jack up the car and jack one side first to make it more unbalance. some of them even lightly shake the car. but act natural like it is normal procedure. those computer also bullshit use 30years also no calibrate one. u think everydays use the sensor still ok? |
|
|
Sep 18 2014, 11:29 AM
|
![]() ![]() ![]()
Junior Member
300 posts Joined: Jan 2013 |
|
|
|
Sep 18 2014, 12:18 PM
|
![]()
Junior Member
43 posts Joined: Nov 2013 |
QUOTE(call me random @ Sep 18 2014, 11:12 AM) My worst exp almost kena con when I wented for service at yindian shop in equine. Never been there I hungry after work lazy to go around to regular workshop. Which shop in Equine?Long story cut short, when I'm about to drive out after say tq bos.. I noticed unusual shakes like in the engine part.. Then they said this one mounting prob must check mounting n do samting. I tiaw them lar i said bos it was all ok before this never shaken so much.. He then check back turned out that spark plug cable idk what u call not put back properly. My last time there. And another.. Din put back the oil dipstick i only notice like few days after. Cant rmb which plc since i move around a lot. So after anybody touch the car ill make sure i check back myself. And one more accesories shop in skudai..i change the rear light paid extra ten bucks for installation n found out they din put the lights in. I change bulb myself also after tat incident.. Shud ask for refund |
|
|
Sep 18 2014, 12:32 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
9,206 posts Joined: Jun 2006 |
|
|
|
Sep 18 2014, 12:46 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
3,848 posts Joined: Dec 2009 From: Ampang |
QUOTE(luyut @ Sep 18 2014, 11:22 AM) haha they cheated la bro. usually the will jack up the car and jack one side first to make it more unbalance. some of them even lightly shake the car. but act natural like it is normal procedure. those computer also bullshit use 30years also no calibrate one. u think everydays use the sensor still ok? but I saw myself they put some device on all four tyres, then some sort of digital gizmos going on..'but then my car club say memang this car pulls to the left one, even if fixed also, the tayar will have uneven wear |
|
|
Sep 18 2014, 01:08 PM
|
![]()
Junior Member
38 posts Joined: Aug 2008 From: malacca |
anybody got experience with lim tayar?
|
|
|
Sep 18 2014, 01:28 PM
|
![]() ![]()
Junior Member
178 posts Joined: Jan 2006 |
QUOTE(Boy96 @ Sep 18 2014, 12:46 PM) but I saw myself they put some device on all four tyres, then some sort of digital gizmos going on..' yeah got some tolerances. but not too much la. one shop in bandar tun husseion onn. speed something bullshit allignement service . went once only experienced the cheating then no more liao. the boss even act like he test ur car after finished balancing. haha.but then my car club say memang this car pulls to the left one, even if fixed also, the tayar will have uneven wear |
|
|
Sep 18 2014, 01:29 PM
|
![]() ![]() ![]()
Junior Member
300 posts Joined: Jan 2013 |
|
|
|
Sep 18 2014, 01:30 PM
|
![]() ![]() ![]()
Junior Member
300 posts Joined: Jan 2013 |
|
|
|
Sep 18 2014, 01:35 PM
|
![]() ![]() ![]() ![]() ![]()
Junior Member
826 posts Joined: Sep 2011 |
go revenge them. write in red paint cryptic words to warn ppl against them. ppl lidat shud be bankrupt out of the business.
|
|
|
Sep 18 2014, 01:44 PM
|
![]() ![]()
Junior Member
169 posts Joined: Nov 2010 From: Black Dragon River |
LEL....orang bodoh aje tukar chamber bolt! Tak perlu tukar! Pergi kedai tayar yang otai dia charge alignment and balancing aje dan settle.
|
|
|
Sep 18 2014, 02:02 PM
|
![]()
Junior Member
43 posts Joined: Nov 2013 |
|
|
|
Sep 18 2014, 02:05 PM
|
![]()
Junior Member
30 posts Joined: Apr 2013 From: Kuala Lumpur, Wilayah Persekutuan, Malaysia |
Yeap kena more than once because I have stupid and ignorant family members. The shop is called Lim Tayar and they sold my family members expired tyres like from more than 2 years ago date manufactured and didn't even reduce price. I mentioned before then nobody gave me any fucuk so when tayar rosak went to the same shop again. I always tell people to boycott Lim Tayar fucuking conmen. BTW they bought runflat tyres so imagine how I feel when I know they overprice them plus expired.
|
|
|
Sep 18 2014, 02:06 PM
|
![]() ![]() ![]()
Junior Member
303 posts Joined: Nov 2013 |
QUOTE(silent_stalker @ Sep 18 2014, 10:07 AM) I go to seri kembangan. Continental shop along the main road. They do balancing old skool way, while tyre still on ur car. Didnt even ask to change chamber nut. N their shop tyre is cheaper compared to other shops in that area. I bought conticomfirt, other shops quote rm20-rm30 more then that shop Got address? Or web reference Thanks |
|
|
Sep 18 2014, 02:15 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,521 posts Joined: Apr 2005 From: too far to see |
Yo btw...
Anyone know where to make complain, if we feel we got con my this type of Tyre shop? Any body and consumer to lodge a report too? |
|
|
Sep 18 2014, 02:19 PM
|
![]() ![]() ![]() ![]() ![]()
Senior Member
852 posts Joined: Apr 2012 |
|
|
|
Sep 18 2014, 02:22 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,689 posts Joined: Mar 2009 From: Probation? |
also, look at the boss first, if its a fatty bom bom, chances are he only know how to squeeze ur balls but dunno how to actually do shit
this happen to my parents at the hyundai service centre in sri damansara, they cut throat and say a lot of parts need to overhaul and all that shit. |
|
|
Sep 18 2014, 02:26 PM
|
![]() ![]() ![]()
Junior Member
423 posts Joined: May 2014 |
QUOTE(ttz @ Sep 18 2014, 02:05 PM) Yeap kena more than once because I have stupid and ignorant family members. The shop is called Lim Tayar and they sold my family members expired tyres like from more than 2 years ago date manufactured and didn't even reduce price. I mentioned before then nobody gave me any fucuk so when tayar rosak went to the same shop again. I always tell people to boycott Lim Tayar fucuking conmen. BTW they bought runflat tyres so imagine how I feel when I know they overprice them plus expired. 2 years ago is not expired.5 years. Yes. |
|
|
Sep 18 2014, 02:34 PM
|
![]() ![]() ![]() ![]() ![]()
Senior Member
920 posts Joined: Jun 2007 From: Somewhere in Malaysia |
I also pernah kena tipu, tukar tayar XM2 185/65/14 RM230 huhu, skrg suda tau. ada kawan2 share information
|
|
|
Sep 18 2014, 02:36 PM
|
![]()
Junior Member
30 posts Joined: Apr 2013 From: Kuala Lumpur, Wilayah Persekutuan, Malaysia |
QUOTE(SamsengFan @ Sep 18 2014, 02:26 PM) Ok maybe expired isn't the case here but they sold old stocks at a price higher than RRP. The brands were Michelin and Bridgestone in multiple cases and when I checked the website the price listed was a little lower. A price check with friends showed that market price is even much much lower than that. I was told that old stock tyres stored in warehouse or storage room for too long unmoved makes the tyre quality degrade compared to new. A simple check with a different shop listed on Michelin website when I call they sold tyres manufactured the same year and they too claim they are not allowed to keep old stocks. IIRC Lim Tayar wasn't even listed as official retailer on Michelin website. |
|
|
Sep 18 2014, 03:15 PM
|
![]() ![]() ![]() ![]() ![]()
Senior Member
746 posts Joined: Aug 2011 From: Lowyat.net |
QUOTE(ListenToTheWind @ Sep 18 2014, 10:26 AM) Same, went to my regular workshop but they are off so went to next door shop and terus need to replace chamber screw RM 50 a piece buta2 kena potong. Btw, the shop is call TOP SPEED. TOP SPEED memang penipu.Even recently go to my regular workshop due to clutch issue they check check also told me your absorb bar no good, engine mount kong, some oil filter ring need change, etc, from verbal quote of RM 600 suddenly shoot up to 1k +. I told them thank you but no thanks because I have no money. Still they replace my gear oil without asking me and bill me terus. Sometime I really hope to go take a course of car repair & DIY. Last time i went to the glenmarie branch want to change engine oil and oil filter. they will come and tell you that this rosak and that rosak. I told them that I don't want to change and the person start to scare me that my car will breakdown and they not reliable for it. I got pissed off and I told them instead of changing so many things, might as well I transplant a new engine. the dude kept quiet and just change what i asked him to do. in the end the car still runs fine. |
|
|
Sep 18 2014, 03:18 PM
|
![]() ![]() ![]()
Junior Member
388 posts Joined: Oct 2008 |
QUOTE(silent_stalker @ Sep 18 2014, 10:07 AM) I go to seri kembangan. Continental shop along the main road. They do balancing old skool way, while tyre still on ur car. Didnt even ask to change chamber nut. N their shop tyre is cheaper compared to other shops in that area. I bought conticomfirt, other shops quote rm20-rm30 more then that shop that wan is on wheel balancing..i think this wan is more stable for the car.. got wan shop in sri gombak.. the alignment machine is very rare.. havent seen any shop using this.. but once u go alignment there.. 6-8 months no need alignment |
|
|
Sep 18 2014, 03:19 PM
|
![]() ![]() ![]()
Junior Member
388 posts Joined: Oct 2008 |
|
|
|
Sep 18 2014, 03:21 PM
|
![]() ![]() ![]()
Junior Member
388 posts Joined: Oct 2008 |
QUOTE(king_shazman @ Sep 18 2014, 10:34 AM) Camber skru one time tuka only. Front right and left. Some cars comes with the one can be adjust. Some car tak boleh adjust. So all u need is to remember which one belum tuka. Left or right. If sudah tukar dua2. U kasitau la sudah tukar. U kasi adjust saja maaa. Lagi mau tukar apa pasat? Rosak? Niamahhh. Itu skru xboleh rosak mia. Itu skru tada kena apa wear n tear lagi mau tukar. Kasi tukar satu keleta mia skru la itu machiam. Kanninahhh hahahaha...spot on broo |
|
|
Sep 18 2014, 03:23 PM
|
![]() ![]() ![]() ![]()
Senior Member
643 posts Joined: Dec 2006 From: In your Heart |
QUOTE(gjohn @ Sep 18 2014, 03:18 PM) that wan is on wheel balancing.. sri gombak which shop. already 2 times balancing but i think kena conned cos my car stilli think this wan is more stable for the car.. got wan shop in sri gombak.. the alignment machine is very rare.. havent seen any shop using this.. but once u go alignment there.. 6-8 months no need alignment pulling to the left then right. RM80 X2 for the effing camber and then when braking the brake pedal gegar after that when i ask, they said need to change brake disk This post has been edited by Swordsmen: Sep 18 2014, 03:28 PM |
|
|
Sep 18 2014, 03:25 PM
|
![]() ![]() ![]()
Junior Member
388 posts Joined: Oct 2008 |
|
|
|
Sep 18 2014, 03:27 PM
|
![]() ![]() ![]()
Junior Member
485 posts Joined: Jan 2009 |
yeah, if change tyre, later must change camber. I noob, know nothing bout it. shop, wangsa maju.
|
|
|
Sep 18 2014, 03:27 PM
|
![]() ![]() ![]()
Junior Member
388 posts Joined: Oct 2008 |
QUOTE(loki @ Sep 18 2014, 11:00 AM) Yeah, my mechanic uncle told me this camber thing is a way for them to make money coz always need to adjust so dont install camber nut. Adjust 1 side = rm12-rm15 which they only putar putar nut... coz car from factory..the nuts are not adjustable nuts..so..when the shop say kena tukar chamber nut..means that their job will be easier |
|
|
Sep 18 2014, 03:40 PM
|
![]() ![]() ![]()
Junior Member
388 posts Joined: Oct 2008 |
QUOTE(Swordsmen @ Sep 18 2014, 03:23 PM) sri gombak which shop. already 2 times balancing but i think kena conned cos my car still i forgot the name..pulling to the left then right. RM80 X2 for the effing camber and then when braking the brake pedal gegar after that when i ask, they said need to change brake disk last time went there...its a shop at corner lot.. last time i remember run by his father.. now his son does all the operation..even do balancing.. but a bit pricy the service..but im satisfied with the job.. ahhh... i think this wan.. Kedai tayar Tai Soon! dah lama bertapak di Jalan Gombak berhadapan dengan Pasar Besar Gombak. Kedai ni menggunakan manual alignment dan mereka akan mencuba kereta anda seganas yang mungkin untuk mendapatkan alignment yang jitu. Mungkin ada yang kata kedai ni mahal, kerana mereka taknak satu pun barang rosak pada kereta anda yang boleh membuatkan steering anda tidak lurus atau pengendalian kereta anda terganggu, jadi mereka akan senaraikan apa yang rosak dan terpulang pada anda untuk menggantikannya atau tidak. Kedai tayar ini telah dipercayai ramai dan ada yang sanggup datang dari jauh hanya untuk mendapatkan servis alignment mereka. Kedai alignment dan tayar terbaik setakat ini dari rating pelanggan yang pernah datang ke kedai berkenaan. Anda boleh menghubungi kedai ini di nombor 03-40235728 atau di alamat No 181, Batu 4 1/2 Jalan Gombak 53300 Kuala Lumpur. if not dun angry at me This post has been edited by gjohn: Sep 18 2014, 03:45 PM |
|
|
Sep 18 2014, 03:52 PM
|
![]() ![]()
Junior Member
92 posts Joined: May 2008 From: Melaka~ |
whoever con me hope they dapat balasan lor.
|
|
|
Sep 18 2014, 03:52 PM
|
![]()
Junior Member
38 posts Joined: Aug 2008 From: malacca |
QUOTE(SamsengFan @ Sep 18 2014, 02:26 PM) last week my window cant wind up due some ball bearing got out of rail, maklumlah, old car, hence normal tear n wear.my objective is to put back the ball back into the rail only. the boss of lim tayar came and examine, plug out another rail with a plastic proytective bearing covering it. and he claims the plastic is wore off due to aged. for god sake i am standing THERE WATCHING, he assume i mislooked or something that he just plug out somehting from my car. Howverr it is true as per i c memang already gone case but i can still choose to fix back the original bearing that is out of rail and my window will b up again without needing to fork out 600++ just to replace an old regulator/switch/rail and bearing as per mentioned everything looks intact to me except for the 5 sen size plactic covering the smaller bearing which is totally out of the question. what i did was i don bother as i only as them to put back the loss bearing back to the window rail and there goes 35 for opening and assmebling bacxk the ball into rail. abt changing the whole regulator and window switch is really rediculous. and it happened in lim tayar latest branch in bangsar. moral of the story, do stand beside the mechanic and understand from them instead of the boss that claims need to change the whole mechanism just for simple wire issue which is later cos a bomb. This post has been edited by hiroki8704: Sep 18 2014, 03:57 PM |
|
|
Sep 18 2014, 03:53 PM
|
![]() ![]()
Junior Member
64 posts Joined: Dec 2013 From: the land of riders |
QUOTE(aimank_88 @ Sep 18 2014, 11:13 AM) No, its the same row as mamak restaurant Subaidah. Beside 7E. If i recall they changed the signboard edi, no more liquimoly. you guys should go to the workshop behind Shell seksyen 7, great and friendly servicecant remember the name of the shop though i sent my car there since few years ago, my bro & my dad also sent their car there, the price I think maybe just a little higher than other shop, but so far they never try to con people who go there go find a guy with long hair, he is really friendly and can sembang2 with him while waiting for your car, if not can just lepak at their waiting room, air conditioned, got snacks and can bancuh 3in1 drink also |
|
|
Sep 18 2014, 04:00 PM
|
![]() ![]() ![]() ![]()
Senior Member
643 posts Joined: Dec 2006 From: In your Heart |
I really don't mind on how much they charge, if they do honest job without ridiculous need to change
unnecessary parts that no need to change then ok la. i,m sked now they already conned me with intentional unbalance with the car alignment and make the drive senget sebelah + even hurt the tyres. This post has been edited by Swordsmen: Sep 18 2014, 04:01 PM |
|
|
Sep 18 2014, 04:04 PM
|
![]() ![]()
Junior Member
64 posts Joined: Dec 2013 From: the land of riders |
|
|
|
Sep 18 2014, 04:14 PM
|
![]() ![]() ![]()
Junior Member
300 posts Joined: Jan 2013 |
|
|
|
Sep 18 2014, 04:18 PM
|
![]() ![]() ![]()
Junior Member
376 posts Joined: Dec 2008 From: /k/ |
Sendiri must know urself a bit loh... Like my colleague, she's been using aircond for more than a year and don't know that aircond has to be serviced
|
|
|
Sep 18 2014, 04:26 PM
|
![]()
Junior Member
21 posts Joined: Nov 2007 |
2 years back.. the guy in Klang sold me old tires..
I bought it and then only got to know that the tires is manufactured years back. |
|
|
Sep 18 2014, 04:27 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
5,542 posts Joined: Dec 2006 |
i purposely ask them to change adjustable camber screw for my front tires, because i want that -1.8 camber
|
|
|
Sep 18 2014, 04:33 PM
|
![]() ![]()
Junior Member
183 posts Joined: Nov 2012 |
|
|
|
Sep 18 2014, 06:46 PM
|
![]() ![]() ![]()
Junior Member
423 posts Joined: May 2014 |
|
|
|
Sep 18 2014, 06:56 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,061 posts Joined: May 2009 |
QUOTE(bengang13 @ Sep 18 2014, 10:49 AM) one thing i notice on perodua...their normal service in total is considered cheaper than outside shop... my brother in law kerja perodua. so i get perodua service with cheaper priceoutside shop quote me normal service with semi synthetic(7000km) range from RM120-160 peerodua quoted me semi synthetic(10000km) rm140...samoer got free drinks and aircond... but u must come to his perodua service center after office hour |
|
|
Sep 18 2014, 07:00 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,061 posts Joined: May 2009 |
|
|
|
Sep 18 2014, 07:05 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,111 posts Joined: Nov 2011 From: at Malaysia |
|
|
|
Sep 18 2014, 07:09 PM
Show posts by this member only | IPv6 | Post
#132
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
5,170 posts Joined: Jul 2006 From: /k//k/, /k/undasang |
QUOTE(cikalakacikaci @ Sep 18 2014, 02:12 AM) guys, if i change rear tyre coz got kembung (dont know what to call it) tokey ask me to change both rear tyre coz he said wont balance if change one oni, is that normal ?or kana tipu better change both, then the other one that still good you simpan buat spareinb4 i noob |
|
|
Sep 18 2014, 07:14 PM
|
![]() ![]() ![]() ![]() ![]()
Senior Member
887 posts Joined: Dec 2010 |
I also Pernah kena con. On my way back from Terengganu to JOHOR, my tyre pecah on the way.
Change to spare tyre then after reach Segamat go to tyre shop to replace the tyre pecah. That time no money so had to buy second hand tyre. Using that tyre until yesterday only know that the tyre is actually tayar korek. |
|
|
Sep 18 2014, 07:58 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,122 posts Joined: Jan 2003 |
Racing Art Klang ok x?
Thinking of tukar rims, takut kena kencing hidup hidup |
|
|
Sep 18 2014, 08:49 PM
|
![]() ![]() ![]()
Junior Member
376 posts Joined: Dec 2008 From: /k/ |
|
|
|
Sep 18 2014, 08:52 PM
|
![]() ![]() ![]()
Junior Member
423 posts Joined: May 2014 |
|
|
|
Sep 18 2014, 08:52 PM
|
![]() ![]()
Junior Member
268 posts Joined: May 2014 |
QUOTE(coklatua @ Sep 18 2014, 07:14 PM) I also Pernah kena con. On my way back from Terengganu to JOHOR, my tyre pecah on the way. wat is tayar konek?Change to spare tyre then after reach Segamat go to tyre shop to replace the tyre pecah. That time no money so had to buy second hand tyre. Using that tyre until yesterday only know that the tyre is actually tayar korek. |
|
|
Sep 18 2014, 08:56 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,664 posts Joined: Jan 2003 From: Ipoh |
QUOTE(Donphatz @ Sep 18 2014, 09:30 AM) Yesterday tukar brake pad, after bukak the mechanic buat muka serius kata ini itu ini itu kena tukar. Which some of it is still new You should go to trusted shop that you are familiar with. Most who you don't know will charge ridiculous price and cut throat by asking you to change this that / say this that broken too. Sometimes you end up HAVING to pay because they have taken out the car to pieces and that by not changing will render the car useless / not usable.Any k/ got bad experience with kedai tayar? But I see that you may not known any trusted workshop so far. Why don't you try carama? There's this ad at paultan that carama doesn't overcharge so what they quote initially is what you ended up paying at the end. www.carama.com/ Malaysia car care portal to find the best mechanic and repair shop for your car, get savings on your car repair, maintain your car service history log and receive ... I didn't try yet because I know some trusted workshops. Maybe you can try it out yourself? |
|
|
Sep 18 2014, 09:01 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,664 posts Joined: Jan 2003 From: Ipoh |
QUOTE(hiroki8704 @ Sep 18 2014, 03:52 PM) last week my window cant wind up due some ball bearing got out of rail, maklumlah, old car, hence normal tear n wear. Now you know how to open the door, can just do it yourself in future. my objective is to put back the ball back into the rail only. the boss of lim tayar came and examine, plug out another rail with a plastic proytective bearing covering it. and he claims the plastic is wore off due to aged. for god sake i am standing THERE WATCHING, he assume i mislooked or something that he just plug out somehting from my car. Howverr it is true as per i c memang already gone case but i can still choose to fix back the original bearing that is out of rail and my window will b up again without needing to fork out 600++ just to replace an old regulator/switch/rail and bearing as per mentioned everything looks intact to me except for the 5 sen size plactic covering the smaller bearing which is totally out of the question. what i did was i don bother as i only as them to put back the loss bearing back to the window rail and there goes 35 for opening and assmebling bacxk the ball into rail. abt changing the whole regulator and window switch is really rediculous. and it happened in lim tayar latest branch in bangsar. moral of the story, do stand beside the mechanic and understand from them instead of the boss that claims need to change the whole mechanism just for simple wire issue which is later cos a bomb. Cars are just like PCs. If (some) pc technician knows that you know shit about computers when you hand it over to them for repairs, they'll say that the motherboard need replacement while it's just the CMOS battery that needs changed. Because you know nothing about computers, you fork out RM500 to replace the mobo rather than spending RM5 for changing battery. Learning about cars is good so we don't get cheated by mechs. For simple stuffs we can DIY, but of course complex require additional big boys tools that we don't have, so we need to send the car over. But still, at least we know something and can fight back. |
|
|
Sep 18 2014, 09:07 PM
|
![]() ![]() ![]() ![]()
Junior Member
632 posts Joined: Mar 2013 |
QUOTE(Donphatz @ Sep 18 2014, 09:30 AM) Yesterday tukar brake pad, after bukak the mechanic buat muka serius kata ini itu ini itu kena tukar. Which some of it is still new standard price usually around 60 bucks... Any k/ got bad experience with kedai tayar? its just a bloody steel screw with a small bump so that it can be 'adjusted' for some mystical reason no factory standard car seems to come with this... |
|
|
Sep 18 2014, 09:19 PM
|
![]()
Junior Member
48 posts Joined: Aug 2012 |
aku tukar tayar moto pon diorang nak con
|
|
|
Sep 18 2014, 09:55 PM
|
![]() ![]() ![]() ![]()
Senior Member
624 posts Joined: Jan 2003 |
|
|
|
Sep 18 2014, 10:02 PM
|
![]() ![]()
Junior Member
135 posts Joined: May 2010 |
Workshop bosnes no honesty wan
|
|
|
Sep 18 2014, 10:07 PM
|
![]() ![]()
Junior Member
183 posts Joined: Dec 2012 |
Adoi
Just say no la Apadaa. |
|
|
Sep 18 2014, 10:13 PM
|
![]()
Junior Member
6 posts Joined: Aug 2014 |
I tell them tukar tayar but old tayar I want take back, dun give them sell second hand tayar that is almost half of the price.
|
|
|
Sep 18 2014, 10:34 PM
|
![]() ![]() ![]() ![]()
Junior Member
672 posts Joined: Sep 2008 |
QUOTE(lorrydriverrocks @ Sep 18 2014, 08:52 PM) tayar korek tu tayar yang dah expired.patut dibuang tak boleh pakai. tayar koyak tapi untung punya pasal:ada orang pergi carik balik tayar tu buat balik bunga kira buat balik sebjik tayar la guna otak sendiri.(tayar biasanya lapisan dia tebal bila tayar tu dah botak lapisan dia makin nipis) yang nipis tu dia pergi toreh buat bunga. nama lain tayar toreh. tayar ni ada banyak nama. harga pun murah daripada tayar biasa. aku suspect xcident yang berlaku kereta terbalik la terbabas la hilang kawalan punca daripada tayar ini. |
|
|
Sep 18 2014, 10:40 PM
|
![]() ![]() ![]() ![]()
Junior Member
672 posts Joined: Sep 2008 |
QUOTE(seiferalmercy @ Sep 18 2014, 10:02 PM) kereta accessories pun macam tu jugak la. aku datang bawak kereta nak tanya harga accesories je. sekali tetiba datang terus bukak bukak pasang. bill terus keluar. bila aku pergi bawak motor tempoh hari xde pulak diorang offer aku apa apa. |
|
|
Sep 18 2014, 11:24 PM
|
![]() ![]()
Junior Member
58 posts Joined: Mar 2007 |
1) Leave it at the workshop to change oil for awhile, end up changing timing belt. Apparently the guy showed me inside the belt got cut. I wonder how on earth did he manage to see that.
2) Changing spare tyre with fixed punctured tyre. After reaching my place, i realised my tyre air cap was rubber instead of metal. Went back and the guy pretend like puzzled and change to metal. But without me checking it, it wasnt the same cap. 3) Changing to new 15" sport rim. End up need to change absorber because 14" different so they say. Later, that absorber making a irritating sound while driving. Lesson learn: A)Dont leave your car. B) Watch them working. C) Keep your tyre metal cap 1st before changing tyre lel |
|
|
Sep 18 2014, 11:32 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
7,727 posts Joined: Jan 2010 From: Ara Damansara, Petaling Jaya & Batu Pahat, Johor. |
even the workshop is ur close friend.. also can't trust.. mechanic can trust then shit can eat! rmb always!
|
|
|
Sep 18 2014, 11:33 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,131 posts Joined: Sep 2010 |
i always stick to 1 good mechanic.
even if i dont know anything and i need to ask, i straight call my mechanic and ask him. so if i go to other mechanic also i know if they kencing me |
|
|
Sep 19 2014, 12:03 AM
|
![]()
Junior Member
42 posts Joined: Oct 2010 |
Biaselah kena tipu. Especially budak baru grad beli kerete pakai setahun dua.
Tapi if you budak bodoh then you will kena tipu second time thrid time X time. Better to learn wahai young padawan |
|
|
Sep 19 2014, 12:59 AM
|
![]() ![]() ![]() ![]() ![]()
Senior Member
887 posts Joined: Dec 2010 |
|
|
|
Sep 19 2014, 10:26 AM
|
![]() ![]()
Junior Member
268 posts Joined: May 2014 |
|
|
|
Sep 19 2014, 11:45 AM
|
![]()
Junior Member
38 posts Joined: Aug 2008 From: malacca |
QUOTE(neato4u @ Sep 18 2014, 09:01 PM) Now you know how to open the door, can just do it yourself in future. yep,Cars are just like PCs. If (some) pc technician knows that you know shit about computers when you hand it over to them for repairs, they'll say that the motherboard need replacement while it's just the CMOS battery that needs changed. Because you know nothing about computers, you fork out RM500 to replace the mobo rather than spending RM5 for changing battery. Learning about cars is good so we don't get cheated by mechs. For simple stuffs we can DIY, but of course complex require additional big boys tools that we don't have, so we need to send the car over. But still, at least we know something and can fight back. i learnt bit by bit for standing next to the mechanics, i usually standby and watch as i don trust them with the works hence i learnt too. meanwhile i don really like to leave my car for overnight, are there any cases where i can get back my car like one day. i can spend whole day watching them. i just need to spray my car roof. |
|
|
Sep 19 2014, 11:50 AM
|
![]()
Junior Member
38 posts Joined: Aug 2008 From: malacca |
QUOTE(technod @ Sep 18 2014, 11:24 PM) 1) Leave it at the workshop to change oil for awhile, end up changing timing belt. Apparently the guy showed me inside the belt got cut. I wonder how on earth did he manage to see that. just to add on, idshonest mechs will tukar away your parts and changed to old parts if yours is new. hence really need to keep an eye. especially your car is a common car where parts are easily swapable.2) Changing spare tyre with fixed punctured tyre. After reaching my place, i realised my tyre air cap was rubber instead of metal. Went back and the guy pretend like puzzled and change to metal. But without me checking it, it wasnt the same cap. 3) Changing to new 15" sport rim. End up need to change absorber because 14" different so they say. Later, that absorber making a irritating sound while driving. Lesson learn: A)Dont leave your car. B) Watch them working. C) Keep your tyre metal cap 1st before changing tyre lel the same theory that second hand sales dealer practice where u c the car is only use for 2-5 years, but inside looks like 10years which does not tally with the intel shared. hence sales person will cover up with BS like blaming previous owner uses the car like a cow. commonly happened to door panel and the radio inside the car. some worst scenario is signal indicator looks like got into a terrible acids spray. the previous owner is alien i think. don buy from dealer buy straight from owner and no additional 3-5k stupid charge that only causes less than RM200. |
|
|
Sep 19 2014, 12:12 PM
|
![]() ![]()
Junior Member
115 posts Joined: Nov 2005 |
QUOTE(payamam @ Sep 18 2014, 10:10 AM) Last time when I work in Kelantan also kena con by a shop that looks so grand with high tech stuff. A few month later, have to get it repaired so later on I decided to send my car to a kampung tyre shop in Kubang Kerian where he adjust chamber, alignment using string and ruler. Before changing here and there, he will test drive first with you sitting at the passenger seat so that he can feel what is wrong with the car. Then only he starts repairing. So old school but that is the most trusted and reliable tyre shop i've gone to in Kelantan. Thumbs up! kedai mana bro ? Mezuan tayar ? |
|
|
Sep 19 2014, 12:17 PM
|
![]() ![]() ![]()
Junior Member
347 posts Joined: Nov 2013 |
|
|
|
Sep 19 2014, 12:20 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,566 posts Joined: Jun 2013 |
so normally 4 bijik tayar proton persona how much they cost?
|
|
|
Sep 19 2014, 12:21 PM
|
![]()
Junior Member
33 posts Joined: Mar 2008 |
the all kedai tayar at ampang waterfront cekik darah dan scammer...!!
|
|
|
Sep 19 2014, 12:46 PM
|
![]()
Junior Member
16 posts Joined: Feb 2009 |
|
|
|
Sep 19 2014, 12:49 PM
|
![]() ![]() ![]() ![]() ![]()
Junior Member
749 posts Joined: Aug 2011 |
TS, kasi tau nama kedai dan lokasi bro. Senang kita AVOID.
Setakat /rant atau sembang kosong, bak kata orang putih. "Perabih bogheh ajo". |
|
|
Sep 19 2014, 12:56 PM
|
![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
1,403 posts Joined: Jun 2009 |
all this camber screw thingy is con job by the workshops. if really need to add, why the car manufacturers never provide it in the first place? UMW Toyota refused to do alignment on my car after replacing drive shaft cover due to addition of the camber screw
|
|
|
Sep 19 2014, 01:19 PM
|
![]() ![]()
Junior Member
108 posts Joined: Sep 2010 From: 420Amsterdam-Bangi-Kajang |
|
|
|
Sep 19 2014, 01:20 PM
|
![]() ![]()
Junior Member
57 posts Joined: Feb 2013 |
|
|
|
Sep 19 2014, 11:22 PM
|
|
Staff
4,465 posts Joined: Dec 2006 From: Theatre of Dreams |
i always go to ah man tyre seksyen 8 bandar baru bangi. gooding alignment and balancing. long lasting. and no ketuk2.
|
|
|
Sep 19 2014, 11:25 PM
|
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Senior Member
2,948 posts Joined: Jun 2007 |
FYI Camber bolt & nuts is not a con job, when the wheels are offset by too much due to age or constant abuse like speeding past humps or going tru potholes will cost them to go beyond certain degree where stock bolt & nut cannot adjust and requires these camber bolt & nuts. It's only a 1 time purchase treat it as a member fee la.
|
| Bump Topic Add ReplyOptions New Topic |
| Change to: | 0.0469sec
0.59
5 queries
GZIP Disabled
Time is now: 3rd December 2025 - 02:36 AM |