Welcome Guest ( Log In | Register )

Outline · [ Standard ] · Linear+

 DFI LANParty UT NF590 SLI-M2R First look, overclocking blood vessels

views
     
TSwindwithme
post Sep 2 2006, 09:34 AM, updated 20y ago

Enthusiast
*****
Senior Member
971 posts

Joined: Jul 2005
Nvidia Chipset has had performance of leading heroes all the time on AMD
platform, this time after AMD launch the AM2 socket CPU, Nvidia also
introduce the relevant chipset at once too.
The most high end chipset is nF590 SLI that support EPP technology and
dual PCI-E X16 SLI that are most powerful chipset in AMD platform nowadays.





Begin from K8 754 nF3, until K8 939 nF4 later on the LANParty series are
always the pride of DFI.
DFI LANParty series are overclocking pioneer among many mobo makers.

The user already can purchase the high-end AM2 product "LANParty UT NF590
SLI-M2R " on the famous e-tailer a few days ago , I believe it will not
disappoint with DFI overclocking fans.








To be frank ...This pattern of packing is used for a very long time.

Though own competitiveness of the products is strong, but change a new
style or more beautiful pattern may contribute to products marketing

user posted image















Product accessory include LANParty sticks, simple and easy installation guide,
Audio module, IO share panel
Cables of Floppy/IDE/SATA, Device Driver CDROM and complete User manual



user posted image



















Full view of the Board

user posted image
















user posted image

















Under left of the mobo include of Two PCI-E X16s , One PCI-E X8 ,
One PCI-E X1 and three legacy PCI slots

user posted image






















Check right of the mobo, the digital PWM design that take ahead PC industrial.

This kind of design mostly appeared in Sever grade system in the past that
provide steady power no matter overclocking or not all the time.

There are extra SIL 3132 chips in the middle, offer two SATAII devices, the
whole mobo SATAII devices are up to eight

user posted image





















On left corner of M/B, You can find the same memory routing pattern on DFI
LAN Party series motherboard recently.

user posted image


















Rear side configuration without Karajan audio module is installed

user posted image






















IO

user posted image


















5 phase Digital PWM

user posted image


TSwindwithme
post Sep 2 2006, 09:41 AM

Enthusiast
*****
Senior Member
971 posts

Joined: Jul 2005
All the capacitors are Japan brand .
Left in the middle is connector for Karajan audio module. This audio module
consists of Realtek ALC855 7.1 channel audio chip.

user posted image





















NF590 SLI

user posted image

















New style power on logo

user posted image
















Nvidia only authorizes EPP technology to Corsair at present,
The feature must SLI ready memory certification ( EPP ) and NF590 present at the same time.

Support EPP memory ---> Corsair TWIN2X2048-6400C3

user posted image














Test platform
CPU:AMD AM2 Althon64 X2 4800+
MB: LANParty UT NF590 SLI-M2R
DRAM:Corsair TWIN2X2048-6400C3
VGA:ELSA 730GT 256B3 DTV
HD:Seagate 7200.7 80GB
POWER:Corsair HX620W Modular Power Supply
Cooler:Tower112


user posted image




















DDRII 1005 CL3 3-3-4 achieve?!

user posted image






DFI NF590 SLI-M2R have advantage of SLI Ready memory, large-scale copper
cooler, 5 phase digital PWM , 8 SATAII and the Japan made capacitor ,
Does DFI still be the winner in the overclocking campaign through above mention advantage feature?
(Let us check it on next BIOS and overclocking benchmark review.)

This post has been edited by windwithme: Sep 2 2006, 09:53 AM
TSwindwithme
post Sep 7 2006, 09:59 AM

Enthusiast
*****
Senior Member
971 posts

Joined: Jul 2005
Certainly BIOS is the advantage that DFI has been in a leading position all
the time in OC ability , let us preview the LANParty UT NF590 SLI-M2R BIOS
feature more detail



Bios main page

user posted image












Parameters setting page for CPU , DRAM , north and south bridge .

user posted image













RAID and Audio page

user posted image













Page of the voltage per device

user posted image












CPU voltage control from 1.00000V to 1.60000V

user posted image












Base on the CPU VID setting you can extra add voltage from +100.1% to
121.1%

user posted image













DDRII voltage control range from 1.70 to 3.00V

user posted image















Memory configuration page

user posted image













DRAM Driver Strength setting page

user posted image













Memory Timing setting page part II

user posted image














TSwindwithme
post Sep 7 2006, 05:21 PM

Enthusiast
*****
Senior Member
971 posts

Joined: Jul 2005
nF590 proprietary EPP ( SLI-Ready Memory ) setting item .
The SLI-Ready memory item can be enable if the DRAM supports EPP ( SLI-Ready memory.)

user posted image













DFI exclusive function ---> CMOS Reloaded which can save four groups of BIOS setting parameters.

user posted image















one more clearer photo of power on logo screen

user posted image

















Test platform
CPU:AMD AM2 Althon64 X2 4800+
MB: LANParty UT NF590 SLI-M2R
DRAM:Corsair TWIN2X2048-6400C3
VGA:ELSA 730GT 256B3 DTV
HD:Seagate 7200.7 80GB
POWER:Corsair HX620W Modular Power Supply
Cooler:Tower112
user posted image











Friendly user interface of Chipset driver installation software.

user posted image











High DRAM bus overclocking rate is top criteria for One excellent
overclocking mobo except the extensive one with the voltage and
frequently.

DDRII 800 CL3 3-3-9 1T memory bandwidth

user posted image













DDRII 800 CL3 3-3-9 1T is steady.
Memory working voltage is 1.93V( Bios set to 2.13V)

user posted image













Memory performance : DDRII 1162 CL4 4-4-4 2T .
The CPU almost reach limit itself . ( VDIMM 2.17V : BIOS set on 2.29V)

user posted image














DDRII 1178 CL4 4-4-4 2T memory bandwidth

user posted image















What is the limitation ?
DDRII 1005 CL3 3-3-4 2T is reached!

user posted image














SmartGuardian seem show lower voltage than BIOS.
It is quite quiet due to use large-scale copper cooler and control default
rotates speed around 2500 RPM .
Nvidia chipset is well know with high temperature but the actual temperature
still can be control under 55 degrees
DFI implement smart fan control , the fan speed can be adjust between 0 to
6500 RPM






Prove to be DFI LANParty series overclocking blood lineage , It 's different
grade with other AM2 mobo that are used before .
Except DDRII voltage up to 3V can use, The DRAM overclocking can be
easy be achieve with more tight timing and more lower voltage.

To be continue ... 3D performance and EPP technology

 

Change to:
| Lo-Fi Version
0.0138sec    0.24    6 queries    GZIP Disabled
Time is now: 21st December 2025 - 06:59 AM