hi guys,
I just brought Sharp 40" HDTV LED. coneected to Astro Beyond.
In Astro Decoder, I saw setting in Resolution
720p
1080i
which one should i choose?
astro byond V12
|
|
 Sep 26 2015, 11:31 AM
Return to original view | IPv6 | Post
#1
|
 
Senior Member
4,853 posts Joined: Nov 2011 From: Klang , Selangor.   
|
|
Quote|
|
Sep 26 2015, 02:55 PM
Return to original view | IPv6 | Post
#2
|
|
Senior Member
4,853 posts Joined: Nov 2011 From: Klang , Selangor.
|
QUOTE(JohnLai @ Sep 26 2015, 12:17 PM) Dont ask obvious question. ok thanks alotOf course you select the highest possible resolution 1080i output = your TV set will deinterlace it to 1080p anyway. *On the other hand.....some cheap Sharp 40" has native 1280x720p resolution (HD Ready) or 1600x900p. Check your tv model specification. It is your loss if TV is not Full HD 1080....... In case the decoder outputs 1080i to a tv that only support 720p, the tv will automatically downscale back to 720p, so you have nothing to lose either way.  mine is full HD 1920 x1080. few website shows 1080i and 1080p. just googled but i dont really understand. This post has been edited by droidtrix: Sep 26 2015, 02:56 PM |
|
|
Oct 6 2015, 02:03 PM
Return to original view | Post
#3
|
|
Senior Member
4,853 posts Joined: Nov 2011 From: Klang , Selangor.
|
QUOTE(Subber @ Oct 6 2015, 12:51 PM) Hi guys, I had the same issue last few days. I need to switch off the decoder and On back. Anyone had issues with Astro beyond not updating, meaning that the date and time are wrong, there's no next program info or TV guide and I can't record anything. Is there a way to hard reset the decoder? Thanks.  |
|
Topic ClosedOptions
|
| Change to: |  0.0833sec
 1.74
 7 queries
 GZIP Disabled
Time is now: 18th December 2025 - 07:10 PM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.