Is it common for Poker II aluminium casing to cost around that much? Planning to get one in the future but not too sure where to start.

0168257061Where can I get one of dem b.87 ps2avrgb? Winkeyless.kr is so hard to navigate, and Google Translate isn't helping at all with the order form.

What size?

Yeah, I know. It's like GON right?
Bottom RGB but top is standard LEDs?
But got zonal lighting and reactive lighting?

ehhh I really want a B.87 

How do you guys store your keycaps?

Topre user has limited option on keycaps. Most of the time, they just stick with the stocked keycaps.
Even Topre corp no longer manufactured new keycaps.

If you looking for cherry mx, then this kind of color scheme is called "beige".
Keycaps makers like imsto, gmk, bsp have this kind of color scheme.


I can say this color scheme keycaps more expensive than Filco keyboard.

Note: A decent keyboard + decent keycaps set always expensive than a Topre keyboard.

zenna told me before a custom keyboard casing cost more than RM300++

why so many? sell me one set please

Selling???

Do you know how to turn off the stupid layer LED?
I can't read Korean

I figured out how to turn off the side LEDs but the flashing thing on the Caps Lock, IDK

You have the tmk firmware for viper or by any chance knows how to make the led blink to indicate which layer?
I'm still lost at trying to figure out how to make led indicator for layer indicator. 

I pulled a key, and seems like a stabilizer got dislodged. Need to desolder the whole thing to see what's wrong.
Such a nice keyboard case. Sayanglah.
Desoldered the LED. Problem solved.
Bad firmware design. It has a mode to turn off all the LEDs except this one. Wtf.

buy buy buy buy buy

Not the housing.

I just desoldered the board. The wire dislodged from the housing, causing it to dislodge from the internal moving part. Need to figure out how to fix this with the plate soldered in, maklumlah i using old stabs. Need new stabs to minimize this issue.

This pcb quality is god awful. Solder first time can smell pcb burning. Desoldered the keyboard and some pads are dying, almost lifted.

Can fix with blue wiring but i really would not want that.
EDIT: nevermind. I added some toothpicks behind the stabilizer bars so that they won't be able to move too much. I think this should be what you mean by the toothpick method?

Pretty stupid decision on the PCB material. This is not a mass manufactured item but a modder's PCB. That means it is meant to be soldered/desoldered multiple times over its lifetime. PCB burning the first time solder is applied is not what I would want to call, good PCB quality. I used 350'C with eutectic solder, the type with silver. The solder pad burns and some of them lifted halfway.

If someone where to desolder this keyboard with full LEDs mounted, good luck. He's gonna burn so many things.

The toothpick is doing its job just fine.

Here's a pict that I managed to take before the sun went down.
Love the case. Makes the keyboard nice and silent. Comparable to an RF silent if I would dare say so.

Out of curiousity, since duck pcb quality is bad, why not spend on other 60% pcb? I find all 60% layout are similar anyway, maybe with few alteration (no no dont get angry ). For the price ( around 1k? ), they should provide better quality pcb.

guise, how to program Duck Viper so that the side LED don't automatically turn on every time?

I read the google translated guide but I still cannot figure it out