Someone who have bought the Perodua Axia G (AUTO)?
I have driving for 3 weeks, and I found some problems on it.
Here I will list out the problems below:
I. The RPM not stable — Sometime I driving at 60km++ and when I slowing down to 40km and below, the RPM meter drop down (for sure), but after I want to get back to 60km and above (I press on the accelerator nicely but not press very hard), the RPM meter rise to 4 and then drop back to 2-3 immediately ( 2-3 which is ECO mode), this situation will cause the car stunning just like when you are driving a manual car at 50km++ speed and suddenly change the gear to second gear.
II. The brake seem like too tightly — Because Axia Standard G don't have ABS, so it was using a normal brake system, but i found the brake system seem too tight, every time after driving from MR2 highway, I found that my front wheel disc was very hot. (water drop will be evaporated when touch the disc wheel)
III. The key ignition switch getting hot after driving — I found that the key ignition switch was very hot after driving, so I try to ask my cousin and I found only Perodua Car will like that even my house also have one Myvi after driving the key ignition will getting hot too.
*** Because I'm the first time buying Perodua Car, maybe the issue above is general problem for all Perodua car or maybe not, I also found that Perodua Car and Proton Car after start the engine and turn on the air-condition system will have the very noisy sound came out from the air-cond.
...and sorry for the weak English explanation~
Who have the problem above~~~~~ maybe the first batch car always have the problem
This post has been edited by D.Monster: Oct 28 2014, 04:59 PM
Oct 28 2014, 04:55 PM
Quote
0.0260sec
0.36
7 queries
GZIP Disabled