guys....stop buying any ohter chipset ccooler....buy the hr-05/hr-05 sli....im using it on my dfi lp experrt and dam its good.... it gets me to only 2 degrees higher than ambient....bt of course theres a fan involved ...its the stock amd fan....heres a picture...


sorie for the blur pictures...

the amd stock fan is the best fan u can use so far ive tested.(of course nt including the tornados and ffb) it beats the 80mm vantec uv, 80mm yate loon, 80mm icute. imo hr-05 is beter than the jing ting coz u can use a variety of fansfor it... 80m,mm-70mm-90mm---they all fit ..just use the right jipties...
of bytheway on a dual slot sli dfi expert without the fan u can still run sli....just both cards must be single sot coolers.... bt if use short cards like 7300gt or 7600gt... with fans still can fit...

This post has been edited by lolhalol: Sep 29 2006, 05:28 PM

@Bliz
bro check in the bulk section .... i think got some bulks of this...or start a bulk from an online store ..then we all will piggyback on that ordder ..save some shiping costs...

@shawty...
hey man me also bought coz of desperado man... my dfi came and nuthin to cool the chipset down.... so went to op to buy.....got riped off bt well the cooling is well worth for the money still...

@powerslide
truer words have nt been spoken
@kataro
dude definately can fit...hr-05 imo can fit almost all mobos..coz it has small footprint...bt will block gc if the chipset is near the pci-e slots...ur borad sure can fit as long ur nt using some super sized cooling solution... like the ninja..so join the hr-05 revolution.hehe
@evilnickwong
dat is a great price man.... i bough mine for 110...somore after they discount me... dam op
@shawty
man things we do when ur in love (desperate)

anyway has anyone tried using peltier on the chipset? specificly a 65wt ...coz uglyvamp selling only bout 40 bucks if im nt mistaken.... should be good right....hmm... imagine that hr-05 with pelt...

This post has been edited by lolhalol: Oct 3 2006, 04:48 PM

bro his board dificult to fit the sli version lah ..if he using a gc got no space to go any direction...if point up , proc hsf block,point down, gc block, point backwards gc or capacitors still block,point towards the front, block by ram and gc...


This post has been edited by lolhalol: Oct 3 2006, 06:06 PM

@ kataro

dude can u post a link to ur boards specs..then we can help u out beter...or post a picture.... and also afaik most mobos(99%) have a way to mount the cooler on.... its either pushpin(amd) or the intel way ,, forgot wats it called.

@kataro
bro the evercool is preety good...not just god..its is veryvery good..bt jsut doenst beet the hr-05..imo

@kataro
bro dis depends..theres too many variables to consider... neway looks like its not gona help much coz most old chipsets dun need much cooling anyway..bt if u really intend to buy a chipset cooler... remember to get universal coolers ..like those that let u use the push pin or the other method...the hr-05 for examle the evercool from the looks of it only uses pushpin so might nt be compatible with most intel mobos.... ( i bet ur nxt system upgradew wiill be a conrow) ...all in all its down to u actually..bt i still stongly recomend the hr-05 over the evercool...looks,performance,and future proof...

@salimbest83
dude need more details man... wats hot? if u wan us to help u ...pls give more details....thx

This post has been edited by lolhalol: Oct 9 2006, 04:02 PM

@kataro
bro both are almost similar..bt imo the hr-05 is beter coz the heat has less distance to travel in the heat pipe to the fins..bt the sli version is also good as it is more compatible with more motherboareds....

http://forum.lowyat.net/index.php?showtopi...4&#entry8922284

for those hu wanted to get the hr-05 bt dun want to pay thru ur nose at opp ...RM95 excluding shiping is preety good deal since rlhh bulk has not got moving yet....bt those hu can wait i suggest waiting for rlh or pm him to c if he has old stock coz his prices is very cheap...

gguys there is one thing that u have to keep in mind... lapping all the way to a perfect mirror finish does not help ur temps in fact it COULD make it worse... the objective is just to get it to be perfectly flat... not mirror... the mirror thing started coz of the bling bling revolution...heres a link that will prove my point...feel free to scroll down to the Do I want a mirror finish part.

http://www.techpowerup.com/articles/cooling/39

@shawty
np man..just spread it around lah, vry cmmon misconception leh, the mirror finish thingi...

bro after i turned traitor to aircooling (tr i miss u..), my storm block ios blody amazing (to me... ) under load the max i ever get is 46. thats with 1.86 v on my ultra-d...n all the people saying that wc is a hassle its not really true at all.. actually once u get it running is very reliable ... not much work to do and its easier to clean..u just have to brush teh rad, on a hsf , u have to remove the whole thing...

haha sometimes tr say it wont fit but sometimes can.... like the dfi lanparty nfoprce 4 series , al;l say cant exceprt for expert , and later models.... but i could fit in.... just have to use the second gc slot...

hr-03? u sure bro... neway the hr-05 is design for vertical casings , coz they use a wick heat pipe.... so gravity has not much of an effect...

brother got a chipset thread di ...

ya loh... wheres the mods anyway?

ya loh..everytime someone say they gona buy a new hsf, they mia wan..lol...too busy playing with the new hardware....lol...neway i would still recomend either the tr hr-05 or the sli version if u want even more flexiblity

check this out. now that is what i call a nb hsf..looks good....

froma company called antazone... and can use passive or active.... but i thick have to mod a fan onto it....