i just stick my DS3 stock passive cooler with a 50mm socket 7 cooler there. spins at 5000 rpm.
that should do the job alright for my overclocked system
Chipset cooler, discussion and suggestion
|
|
 Apr 2 2007, 11:43 PM
Return to original view | Post
#1
|
 
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah   
|
btw, how u guys measure chipset temperature?
i just stick my DS3 stock passive cooler with a 50mm socket 7 cooler there. spins at 5000 rpm. that should do the job alright for my overclocked system |
Quote|
|
|
|
|
Apr 3 2007, 12:40 AM
Return to original view | Post
#2
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(sHawTY @ Apr 3 2007, 12:01 AM) By looking at the motherboard temperature. i thought the motherboard temp (shown in everest) is the PWM temp..??    |
|
|
Apr 4 2007, 10:46 PM
Return to original view | Post
#3
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(akachester @ Apr 4 2007, 07:40 PM) Does SB chipset get affected in terms of temperature when OCing like the NB? QUOTE(sHawTY @ Apr 4 2007, 08:40 PM) Good question, i've always been thinking about the same thing. well,  Can anyone help us in answering this question?  SB is the I/O controller hub (ICH) which is made to take the control the slower busses on the mobo: eg: PCI buses, IDE controllers, DMA, ACPI, USB controller etc. Our onboard ethernet, RAID controller, Firewire, etc also working under the SB. So i think overclocking wont make such heavy impact on the SB (unless we change a certain bus clock speed). The SB will generate more heat when we are working more into data transfers, database systems (Servers), or any excessive I/O requests from the controllers in the SB. This post has been edited by BlackThyra87: Apr 4 2007, 10:50 PM |
|
|
Apr 5 2007, 04:16 PM
Return to original view | Post
#4
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(Calcool77 @ Apr 5 2007, 04:07 PM) Wut is the normal temperature for ur mobo after installed chipset cooling(any brand will do) i get around 38 celsius with my CM blue ice pro,izzit consider ok?? how do u measure the NB temp? |
|
|
Apr 5 2007, 08:33 PM
Return to original view | Post
#5
|
|
Senior Member
1,643 posts Joined: Jan 2003 From: Pulau Indah
|
QUOTE(Calcool77 @ Apr 5 2007, 04:32 PM) i checked on the bios and pc wizard as well...both of them showing around 38 plus minus..izzit consider good or bad? show me a screenie from ur PC Wizard.  i cant find a NB temp sensor in my DS3 rev1.0 but alot reported that rev.3.3 got. |
| Change to: |  0.0167sec
 0.82
 7 queries
 GZIP Disabled
Time is now: 10th December 2025 - 05:25 AM |
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Powered by Invision Power Board © 2025 IPS, Inc.