Chipset cooler, discussion and suggestion
|
|
 Aug 20 2006, 08:45 AM, updated 18y ago
Show posts by this member only | Post
#1
|
 
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com  
|
Zalman ZM-NBF47
Noctua NC-U6 PcCooler HB-771s PcCooler NB-400Cu ThermalTake Extreme Spirit II SunnyStone SS HA-001 no official link yet,for more details,refer to page 24 EnzoTech CNB R1 Thermalright HR-05 SLi version JingTing Forcetake JTS-0006 Swiftech MCX159-CU This post has been edited by coolice: Feb 28 2007, 04:55 PM |
|
|
|
|
|
Aug 21 2006, 07:15 PM
Show posts by this member only | Post
#2
|
Senior Member
1,526 posts Joined: Nov 2004 From: Ninja Turtle State 
|
Blue Ice II also good. Search it around.
|
|
|
Aug 21 2006, 08:58 PM
Show posts by this member only | Post
#3
|
All Stars
14,908 posts Joined: Jul 2005 
|
Get yourself a Thermalright HR-05...
It's the best heatsink for chipset...  Can beat any aftermarket chipset heatsink easily... |
|
|
Aug 21 2006, 09:18 PM
Show posts by this member only | Post
#4
|
Senior Member
660 posts Joined: Apr 2005
|
QUOTE(emmeir @ Aug 21 2006, 07:15 PM) Blue Ice II also good. Search it around. Blue Ice II look nice only... i have before.. very sux... damn sux..  QUOTE(sHawTY @ Aug 21 2006, 08:58 PM) Get yourself a Thermalright HR-05... this 1 100% damn super hyper good.. .good to get it ASAPIt's the best heatsink for chipset... Can beat any aftermarket chipset heatsink easily... |
|
|
Aug 22 2006, 12:24 AM
Show posts by this member only | Post
#5
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Guriseruda @ Aug 21 2006, 09:18 PM) Blue Ice II look nice only... i have before.. very sux... damn sux.. I second that...this 1 100% damn super hyper good.. .good to get it ASAP Blue ice 2 damn sucks!!! That's why i sell it...  Thermalright HR-05 is built for fanless... But u can also put a 70MM fan on it to make it perform better... If you're wondering how it looks, it's like this:  |
|
|
Aug 22 2006, 02:07 AM
Show posts by this member only | Post
#6
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
ya..thermalright prodyct is always nice..but the prob..where to get?if bulk need to wait..i hope can get it asap..any idea?how much is the HR-05 now?
|
|
|
|
|
|
Aug 22 2006, 02:11 AM
Show posts by this member only | Post
#7
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(coolice @ Aug 22 2006, 02:07 AM) ya..thermalright prodyct is always nice..but the prob..where to get?if bulk need to wait..i hope can get it asap..any idea?how much is the HR-05 now? Bulk hoo?The bulk is already closed...  And i don't think the seller want to open the bulk again... Maybe you can buy from Overclockers Paradise at LYP, but i have to remind you something, their prices are out of the world...  |
|
|
Aug 22 2006, 02:19 AM
Show posts by this member only | Post
#8
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
|
|
|
Aug 22 2006, 02:27 AM
Show posts by this member only | Post
#9
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(sHawTY @ Aug 22 2006, 02:11 AM) Bulk hoo? ya..just found it,closed edi.,.so sad..The bulk is already closed... And i don't think the seller want to open the bulk again... Maybe you can buy from Overclockers Paradise at LYP, but i have to remind you something, their prices are out of the world... QUOTE(PowerSlide @ Aug 22 2006, 02:19 AM) haha..to new but does it arrive here ke?ask moderno now..heheedited:omg..this chipset lowest price is 8.xx usd This post has been edited by coolice: Aug 22 2006, 02:32 AM |
|
|
Aug 22 2006, 03:17 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Aug 22 2006, 02:19 AM) Yup, it beats HR-05 in fanless design...But for HR-05, you have one pro's then Zalman Fanless Chipset Heatsink... For the HR-05, you can fit a 70MM fan on it... But how do you want to fit a fan on that Zalman Fanless Chipset Heatsink? There's no holes or anything else to lock down any fans... And just imagine how well the HR-05 will perform with a fan attached to it...  Definitely better than that Zalman Fanless Chipset Heatsink...  Overall, the HR-05 still wins... But it still lose if you're using SLI Setup...  |
|
|
Aug 22 2006, 04:40 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
QUOTE(sHawTY @ Aug 22 2006, 03:17 AM) Yup, it beats HR-05 in fanless design... no worryBut for HR-05, you have one pro's then Zalman Fanless Chipset Heatsink... For the HR-05, you can fit a 70MM fan on it... But how do you want to fit a fan on that Zalman Fanless Chipset Heatsink? There's no holes or anything else to lock down any fans... And just imagine how well the HR-05 will perform with a fan attached to it... Definitely better than that Zalman Fanless Chipset Heatsink... Overall, the HR-05 still wins... But it still lose if you're using SLI Setup... got hr-05 for sli! |
|
|
Aug 22 2006, 06:13 PM
|
Junior Member
263 posts Joined: Jan 2003 From: Puchong
|
Anyone tried CM Blue Ice Pro before? Good?
|
|
|
Aug 22 2006, 06:48 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Tingwc84 @ Aug 22 2006, 06:13 PM) Anyone tried CM Blue Ice Pro before? Good? Yup!!!It's good... It's better than it's elder brother... [Blue Ice 2] Blue ice pro perform a little better than Blue Ice 2... But, if u're going for Blue Ice Pro, don't go for it, go for Thermalright HR-05!!! |
|
|
|
|
|
Aug 22 2006, 07:42 PM
|
|
Senior Member
660 posts Joined: Apr 2005
|
QUOTE(sHawTY @ Aug 22 2006, 02:11 AM) Bulk hoo? ya damn super expensive... super sux shop.. just want to kill our money onlyThe bulk is already closed... And i don't think the seller want to open the bulk again... Maybe you can buy from Overclockers Paradise at LYP, but i have to remind you something, their prices are out of the world... QUOTE(sHawTY @ Aug 22 2006, 06:48 PM) Yup!!! i'm also planing to get 1. soon.. i'm damn like Thermalright product.. cause n put any brand fan u like... heh he It's good... It's better than it's elder brother... [Blue Ice 2] Blue ice pro perform a little better than Blue Ice 2... But, if u're going for Blue Ice Pro, don't go for it, go for Thermalright HR-05!!! |
|
|
Aug 22 2006, 10:04 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
any one know where to get zalman fanless chipset cooler and thermalright hr-05?
|
|
|
Aug 23 2006, 12:34 AM
|
Senior Member
991 posts Joined: Jan 2003 From: PeNaNg 
|
QUOTE(coolice @ Aug 22 2006, 10:04 PM) any one know where to get zalman fanless chipset cooler and thermalright hr-05? U may ask abg moderno since he's doin' Zalman bulk  |
|
|
Aug 23 2006, 01:14 AM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(bombman @ Aug 23 2006, 12:34 AM) U may ask abg moderno since he's doin' Zalman bulk pmed him yesterday edi..but no reply yet.. |
|
|
Aug 25 2006, 12:45 PM
|
 
VIP
3,773 posts Joined: Jan 2003 From: Anywhere lah...as long got Kopi-O 
|
I don't know about the new HR05, but based on my experience, the best chipset cooler I used bar none was the thermalright NB-1C (now obseolete) followed by NB-1. This was after trying 4 chipset coolers (including thermaltake's which was soo loud, I swear it's the Volcano's noisy kid brother)
|
|
|
Aug 29 2006, 01:10 AM
|
Elite
1,928 posts Joined: Jan 2003 From: i miss goatse :(  
|
how about the Micro Cool NorthPole?
i got one to sell, quite new and unused. anyone keen? |
|
|
Aug 29 2006, 02:32 AM
|
|
VIP
3,773 posts Joined: Jan 2003 From: Anywhere lah...as long got Kopi-O
|
QUOTE(eBola @ Aug 29 2006, 01:10 AM) how about the Micro Cool NorthPole? let me google it and see how. PM me your price o mighty grizzly beari got one to sell, quite new and unused. anyone keen? |
|
|
Aug 29 2006, 05:47 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
|
|
|
Aug 29 2006, 10:19 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Aug 29 2006, 05:47 PM) The first model that is this one:AS-N1000 I believe it's good!!! But the 2nd [AS-N2000] model that is almost the same with Blue Ice 2, i believe it sucks to the max just like blue ice 2... |
|
|
Aug 30 2006, 01:20 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
ya..the 1000 looks interesting..
but the price something like 34USD at newegg..i dun think i would spend dat much on chipset cooler |
|
|
Sep 7 2006, 09:41 AM
|
Junior Member
229 posts Joined: Nov 2004
|
any1 tried termaltake extreme spirit 2?
good arh this chipset cooler? |
|
|
Sep 7 2006, 06:46 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(manutd304 @ Sep 7 2006, 09:41 AM) any1 tried termaltake extreme spirit 2? It sucks!!!good arh this chipset cooler? Don't buy it!!! Instead, go get yourself a Thermalright HR-05... The best chipset heatsink so far... |
|
|
Sep 7 2006, 07:09 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
TT extreme spirit 2 sucks kah..adui
im out of choice liao..hr-05 cant fit..zalman latest fanless aso i think cant fit..last choice CM blue ice pro but i dowan..i wan a hr05  |
|
|
Sep 7 2006, 07:15 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Sep 7 2006, 07:09 PM) TT extreme spirit 2 sucks kah..adui Huh?im out of choice liao..hr-05 cant fit..zalman latest fanless aso i think cant fit..last choice CM blue ice pro but i dowan..i wan a hr05 Can't fit? Why?  Are u using SLI? If u do, go get u're self an HR-05 SLI version...  It's sure better than any other chipset cooler, but the performance i think a little lower than original HR-05... |
|
|
Sep 7 2006, 07:19 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
Try to find thermalright NB-1/1C, these are one of the best chipset cooler around. Try pm evilnickwong, i think he has a NB-1 for sale
 |
|
|
Sep 7 2006, 07:27 PM
|
Senior Member
859 posts Joined: Jun 2005 From: anywhere
|
how bout evercool vc-rf?dinster doing a bulk on these...
|
|
|
Sep 7 2006, 07:54 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
QUOTE(sHawTY @ Sep 7 2006, 07:15 PM) Huh? ol skool s478 Can't fit? Why? Are u using SLI? If u do, go get u're self an HR-05 SLI version... It's sure better than any other chipset cooler, but the performance i think a little lower than original HR-05... now using xp120 n the chipset placement on my msi mobo is very near so no space..best is jus low profile like blue ice pro hav try some measurement..might or might not fit.. TR nb-1/nb-1c is good choice but i feel in love at hr-05 n the evercool cant use coz my mobo uses push pin instead of a hole |
|
|
Sep 7 2006, 09:00 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Sep 7 2006, 07:54 PM) ol skool s478 Hey bro.. now using xp120 n the chipset placement on my msi mobo is very near so no space..best is jus low profile like blue ice pro hav try some measurement..might or might not fit.. TR nb-1/nb-1c is good choice but i feel in love at hr-05 n the evercool cant use coz my mobo uses push pin instead of a hole If u're using socket 478 motherboard.. I am very very sure that HR-05 fits perfectly on your motherboard.. There will be no complication.. Trust me... It won't... |
|
|
Sep 7 2006, 09:35 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
my mobo ini maciam..same layout jus diff model
 the chipset placement too close n the xp120 heatpipe is kinda blocking.. mebb jus take the risk buy one n try..cant use sell to u |
|
|
Sep 7 2006, 09:50 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Sep 7 2006, 09:35 PM) my mobo ini maciam..same layout jus diff model 95% of my sixth sense says that it can fit into your mobo... the chipset placement too close n the xp120 heatpipe is kinda blocking.. mebb jus take the risk buy one n try..cant use sell to u 5% of my sixth sense says cannot... Buy it first la.. If cannot fit, then sell to me cheap cheap loo... After that i can fit another HR-05 to the southbridge... Two HR-05 after that, one is on northbridge, and the other one on the southbridge with both using Delta 70MM fan... Just day dreaming...  |
|
|
Sep 7 2006, 09:52 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
aiseh got hr05 d..jeles jeles
eh..southbridge aso wana use..dats hardcore liao now wait for bulk 1st..imagine use ultra 120 wid hr05..two tower This post has been edited by PowerSlide: Sep 7 2006, 09:53 PM |
|
|
Sep 7 2006, 09:56 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Sep 7 2006, 09:52 PM) aiseh got hr05 d..jeles jeles That's what i'm using now... eh..southbridge aso wana use..dats hardcore liao now wait for bulk 1st..imagine use ultra 120 wid hr05..two tower Ultra 120 with HR-05 on my ABIT AW8D MAX... Believe me, even without fan, the HR-05 also works great!!! This post has been edited by sHawTY: Sep 7 2006, 09:57 PM |
|
|
Sep 8 2006, 06:08 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
QUOTE(sHawTY @ Sep 7 2006, 09:56 PM) That's what i'm using now... fuiyoh Ultra 120 with HR-05 on my ABIT AW8D MAX... Believe me, even without fan, the HR-05 also works great!!!  post some pic can ar..wana hav a look |
|
|
Sep 8 2006, 12:55 PM
|
|
Senior Member
1,526 posts Joined: Nov 2004 From: Ninja Turtle State
|
QUOTE(sHawTY @ Sep 7 2006, 09:56 PM) That's what i'm using now... huhu.. sound promising. wanna share some picture?Ultra 120 with HR-05 on my ABIT AW8D MAX... Believe me, even without fan, the HR-05 also works great!!! |
|
|
Sep 8 2006, 07:38 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
Why you guys always ask me for pictures?
I dun have a digital camera @ webcam or anything else that can took pictures except for Film Cameras... Lame am i not? |
|
|
Sep 8 2006, 10:17 PM
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
aiyah....then just use the film camera then go cybercafe and scan laaaaaa...
quick quick... wanna see pix |
|
|
Sep 8 2006, 10:46 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(mADmAN @ Sep 8 2006, 10:17 PM) aiyah....then just use the film camera then go cybercafe and scan laaaaaa... Aiyah, u think it's that simple kaa?quick quick... wanna see pix I have to print it first laa... But the main thing is, it's kinda shame shame to use an old film camera... Funny eeh? Wakakaka... This post has been edited by sHawTY: Sep 8 2006, 10:47 PM |
|
|
Sep 8 2006, 10:48 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
its ancient use film but nostalgic mah
borrow fonecam kah anything laa..if no pic ask moderator ban u |
|
|
Sep 8 2006, 11:12 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Sep 8 2006, 10:48 PM) its ancient use film but nostalgic mah ................. borrow fonecam kah anything laa..if no pic ask moderator ban u U're so kejam la weh... Why wanna ban me? Damn u...   Joking joking...... This post has been edited by sHawTY: Sep 8 2006, 11:12 PM |
|
|
Sep 8 2006, 11:46 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
if not plz send ur ultra 120 n hr-05 to me straight away
ultra 120 can hook 2 fans ar? gona be good push pull configuration |
|
|
Sep 8 2006, 11:53 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Sep 8 2006, 11:46 PM) if not plz send ur ultra 120 n hr-05 to me straight away Can only hook one fan coz thermalright only gives the hook for fitting one fan on their Ultra 120... ultra 120 can hook 2 fans ar? gona be good push pull configuration But, you can still put two by using cable tie... But... But... It's ugly... |
|
|
Sep 8 2006, 11:56 PM
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
Forcetake JTS-0006 Heatpipe Chipset Cooler from JingTing
no1 extreme chip set cooler can fit all mobo  i got 2 extra wts |
|
|
Sep 9 2006, 12:02 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
Hey powerslide....
Look at this chipset heatsink "KVMCOM" are tokin' about... Do you think it can surpasses HR-05?  Don't think so... I oso believe that it's performance is just the same with CoolerMaster Blue Ice Pro... No offence KVMCOM, just giving my opinion though... This post has been edited by sHawTY: Sep 9 2006, 12:02 AM |
|
|
Sep 9 2006, 12:06 AM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
stop spending all ur money on ur PC and get a digicam man...
i myself just bought myself my first ever digicam a week ago |
|
|
Sep 9 2006, 12:14 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
the chipforce is interesting..but again hr-05 more sexay
but only can use for mobo wid hole mounting..aiyo..n the price aso too much for me |
|
|
Sep 9 2006, 02:15 AM
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
QUOTE(sHawTY @ Sep 9 2006, 12:02 AM) Hey powerslide.... pls refer irenic to check whether good or notLook at this chipset heatsink "KVMCOM" are tokin' about... Do you think it can surpasses HR-05? Don't think so... I oso believe that it's performance is just the same with CoolerMaster Blue Ice Pro... No offence KVMCOM, just giving my opinion though... he bought 1 from me to replace on his asus mobo stock heatpipe cooler |
|
|
Sep 9 2006, 12:10 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
One call for irenic..
One call for irenic, please share your experience on using that force chipset cooler... |
|
|
Sep 9 2006, 12:19 PM
|
Senior Member
9,027 posts Joined: Jan 2003 From: Ipoh
|
No one talking about evercool chipset heatsink dinster selling?
Thinking to get one to put on tf550 |
|
|
Sep 9 2006, 12:39 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(allenultra @ Sep 9 2006, 12:19 PM) No one talking about evercool chipset heatsink dinster selling? Not that we don't wanna talk about it...Thinking to get one to put on tf550 It's just too simple... We're here discussing for high end chipset heatsinks such as Thermalright HR-05... @allen, maybe u could post some temperature differences before and after swapping to those heatsinks... This post has been edited by sHawTY: Sep 9 2006, 12:40 PM |
|
|
Sep 9 2006, 06:24 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
c'mon guys,share ur aftermarket chipset cooler result..
|
|
|
Sep 9 2006, 06:35 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
hehe..the jingting aso goodlaa..more or a same as hr-05
jus the price a little exp for a chipset cooler..one of the best is swiftech mcx-159..but hard to get locally |
|
|
Sep 9 2006, 06:36 PM
|
Senior Member
1,298 posts Joined: Jul 2006 From: KLANG TELOK PULAI
|
QUOTE(sHawTY @ Sep 9 2006, 12:02 AM) Hey powerslide.... CAn i know you buy this cooler or modding ur self?Look at this chipset heatsink "KVMCOM" are tokin' about... Do you think it can surpasses HR-05? Don't think so... I oso believe that it's performance is just the same with CoolerMaster Blue Ice Pro... No offence KVMCOM, just giving my opinion though... |
|
|
Sep 9 2006, 06:41 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
Hey powerslide, u're talking about this chipset heatsink:
 It sure look promising, but... Sorry to say this but, it's a little ugly... Tingjling? Sure aa it can beat HR-05? Well, for me HR-05 is the best... With heatpipe, can fit 70MM fan... Just think if you fit a high cfm 70MM fan on that HR-05... Damn it's gonna beat every chipset heatsink in the market... **I'm using my HR-05 fanless now... Can't find a good 70MM fan in the market... QUOTE(ayu @ Sep 9 2006, 06:36 PM) CAn i know you buy this cooler or modding ur self? Mod? No i didn't mod it... It's on sale by kvmcom... Go check it out... But be worry about the price though... It's damn expensive... This post has been edited by sHawTY: Sep 9 2006, 06:43 PM |
|
|
Sep 9 2006, 07:02 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
@sHawTY
wan a good 70mm fan?? use the A64 s754 or s939 stock heatsink fan... its 70mm, low profile and good enough to cool a processor...  all u need to do is find one  |
|
|
Sep 9 2006, 09:04 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(mADmAN @ Sep 9 2006, 07:02 PM) @sHawTY I don't want a low profile fan...wan a good 70mm fan?? use the A64 s754 or s939 stock heatsink fan... its 70mm, low profile and good enough to cool a processor... all u need to do is find one I want a ganas ganas fan!!! So that it'll make my HR-05 cools my chipset heatsink cools much more... So madman, do you have any good 70MM fan? |
|
|
Sep 9 2006, 09:22 PM
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya
|
any of u guys used jing ting and hr05 ?
i once own jingting (the older one, not the full copper) and at that time it is the best heatsink i ever used.. then i sold it to use hr 05 but performance is not same, hr 05 hotter by 2c.. so rite now i bought the new jingting back and my nb temp @ 33c which is 1c cooler than the old jingting but 3c cooler than hr05 i also have coolermaster blue ice pro for my sb rite now and it is good as well.. cant compare with the jingting bcoz one used for nb n one used for sb  |
|
|
Sep 9 2006, 09:46 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
ya shawty the mcx159 is regarded one of the best too..but mebb now hav been dethrone by jingting, hr-05 or even the new zalman
irenic hav proof jingting has beat hr-05 |
|
|
Sep 9 2006, 10:32 PM
|
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya
|
rite now i am priming my asus p5b deluxe + e6600 @ 1.45vcore, 1.45v nb, 1.6v sb and using coretemp my cpu temp is 64c,
using DMM my NB temp is 32c, SB is 36c... i dunno ambient temp but i believe around 29c (just guessing ) |
|
|
Sep 10 2006, 12:13 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
Sigh...
So my trustworthy chipset heatsink has been beaten by jing ting chipset heatsink...? Ohh... What the heck... HR-05 still looks better than any other chipset heatsinks... I'm lovin it!!! |
|
|
Sep 10 2006, 12:36 AM
|
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya
|
why u thinks it is impossible for jing ting to beat ur thermalright? ahaks..
jingting forcetake chipset is famous at DFI street and XS as well.. just they are a bit expensive compared to others like evercool, hr05... anyway, biostar 965p deluxe is one of the best overclocking board for conroe.. conclusion : never underestimate unpopular brand :-" |
|
|
Sep 10 2006, 01:33 AM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(sHawTY @ Sep 9 2006, 09:04 PM) I don't want a low profile fan... no i dont... 40mm got la I want a ganas ganas fan!!! So that it'll make my HR-05 cools my chipset heatsink cools much more... So madman, do you have any good 70MM fan? the AMD stock fan is a delta oso by the way but if u want mroe ganas then try searching for the Delta FFB 70mm fan.. but i doubt u can get it here...might have to order online |
|
|
Sep 12 2006, 03:45 AM
|
Senior Member
3,291 posts Joined: Jan 2005 From: Nowhere Everywhere
|
QUOTE(irenic @ Sep 10 2006, 12:36 AM) why u thinks it is impossible for jing ting to beat ur thermalright? ahaks.. The name jing-ka-ling-ling doesn't sounds CONvincing. jingting forcetake chipset is famous at DFI street and XS as well.. just they are a bit expensive compared to others like evercool, hr05... anyway, biostar 965p deluxe is one of the best overclocking board for conroe.. conclusion : never underestimate unpopular brand :-" Ugh.. I am having an SLi mobo right now.. getting a good north/southbridge cooler will be a pain in the arse. The jing-ka-ling-ling ( ) is tempting me, but the price scared me. H@H@H... |
|
|
Sep 12 2006, 04:46 AM
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
QUOTE(Enigmatic @ Sep 12 2006, 03:45 AM) The name jing-ka-ling-ling doesn't sounds CONvincing. my cost plus shipping fr US already RM150 coz order from online store not direct fr.manufacturer Ugh.. I am having an SLi mobo right now.. getting a good north/southbridge cooler will be a pain in the arse. The jing-ka-ling-ling ( ) is tempting me, but the price scared me. H@H@H...I just add RM10 for processing fees = Rm160 |
|
|
Sep 12 2006, 07:27 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Enigmatic @ Sep 12 2006, 03:45 AM) The name jing-ka-ling-ling doesn't sounds CONvincing. Then, go for Thermalright HR-05 SLI... Ugh.. I am having an SLi mobo right now.. getting a good north/southbridge cooler will be a pain in the arse. The jing-ka-ling-ling ( ) is tempting me, but the price scared me. H@H@H... No problem with SLI motherboard... Care to get one for your motherboard? |
|
|
Sep 12 2006, 01:31 PM
|
|
Senior Member
3,291 posts Joined: Jan 2005 From: Nowhere Everywhere
|
Actually I believe that jingting something can fit my mobo. Not that I actually doubt it's performance (knowing how kvmcom and irenic are), but then again the marketting name doesn't sounds convincing to some people. My motherboard's abit cranky. Jetway SLI-GT board. The north/southbridge is located DIRECTLY underneath the SLi cards. Sheesh. Not yet got myself a SLi setup though. Just thinking of possiblities. This post has been edited by Enigmatic: Sep 12 2006, 02:29 PM |
|
|
Sep 19 2006, 10:29 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
There's one more chipset heatsink that is quite powerful i think...
 I said that by the looks of it laa... Ohh, and by the way, it's damn beautiful too... Plus, it's Cute... This is what i'm talking about: "Microcool Northpole XE Whisper"  Cool right? Hey powerslide, what do you think of this chipset heatsink? Cute eeh? |
|
|
Sep 19 2006, 07:39 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
i think this is even sexier
 its by PC Cooler. the 2 screwholes on top is to screw a fan to it... dunno the webbie link...cant seem to find it. uglyvamp sells it by the way |
|
|
Sep 19 2006, 08:06 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
Wah that heatsink looks very good, any idea where to get it?
|
|
|
Sep 19 2006, 08:21 PM
|
All Stars
13,783 posts Joined: Jan 2006 From: stress & confuse world 
|
got any web tht show detail of thermalright hr-05?
|
|
|
Sep 19 2006, 11:28 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
Yeah madman, that pc cooler is sexier than the microcool heatsink...
But wait until u put a 40MM fan on the top, it'll be damn ugly... |
|
|
Sep 20 2006, 08:32 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(hihihehe @ Sep 19 2006, 08:21 PM) got any web tht show detail of thermalright hr-05? Here you go:http://www.thermalright.com/a_page/main_product_hr05.htm |
|
|
Sep 20 2006, 09:13 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
shawty,
i lup the microcool..its cute n its work well but not the price y dun u get one..make a comparison against ur hr-05 madman, its this same as the one u posted? http://forums.vr-zone.com/showthread.php?t=90850 looks like not very well engineered |
|
|
Sep 20 2006, 09:24 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Sep 20 2006, 09:13 AM) shawty, I'd love to get the microcool chipset heatsink...i lup the microcool..its cute n its work well but not the price y dun u get one..make a comparison against ur hr-05 madman, its this same as the one u posted? http://forums.vr-zone.com/showthread.php?t=90850 looks like not very well engineered But the price...  And with i'm using an intel chipset board, i have to buy another retention module just to hook that chipset heatsink to my board... Then the price? |
|
|
Sep 20 2006, 09:32 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
too exp!!!!!
the thing cost like 28USD den + the hook like 4USD better stay wid ur hr-05 |
|
|
Sep 20 2006, 10:46 AM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
QUOTE(PowerSlide @ Sep 20 2006, 09:13 AM) madman, looks the same... brand name is diff though...its this same as the one u posted? http://forums.vr-zone.com/showthread.php?t=90850 looks like not very well engineered http://www.pccooler.cn/english-www/product...uct_nb400cu.htm either way....it still looks sexy as hell to me hehhehe |
|
|
Sep 20 2006, 10:59 AM
|
Junior Member
82 posts Joined: Apr 2006 From: Theatre Of Dream
|
QUOTE(allenultra @ Sep 9 2006, 12:19 PM) No one talking about evercool chipset heatsink dinster selling? 10'C plus temp drop compared to crappy stock nf4 lp heatsink.Thinking to get one to put on tf550 stock: 52'C (load) dinster's evercool: 40'C (load) hope this help. This post has been edited by footie: Sep 20 2006, 10:59 AM |
|
|
Sep 23 2006, 02:21 AM
|
Senior Member
1,159 posts Joined: Jan 2003 From: the other side of malaysia
|
Honestly speaking, jingting is quite a good chipset cooler. If I remember correctly Jing Ting was the first to use the SLI chipset cooler design and their first chipset cooler was the best when it was launched.
Jing Ting is a company formed by a thermaltake distribution company. Again, if I'm not wrong it is made by the same manufacturer for thermaltake heatsinks. |
|
|
Sep 24 2006, 10:19 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
Just wondering if anybody using the coolermaster blue ice pro on DS3? Wanna change the stock HS on the chipset, running bloody hot
. I would like to lay my hands on HR-05 but need to bulk<<--- HATE WAITING~~ |
|
|
Sep 25 2006, 12:53 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
QUOTE(Bliz @ Sep 24 2006, 10:19 PM) Just wondering if anybody using the coolermaster blue ice pro on DS3? Wanna change the stock HS on the chipset, running bloody hot blue ice pro is good if u dowan wait for bulk..it sure can be use on ur mobo infact it support all kind of mobo . I would like to lay my hands on HR-05 but need to bulk<<--- HATE WAITING~~ |
|
|
Sep 25 2006, 01:38 AM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(PowerSlide @ Sep 25 2006, 12:53 AM) blue ice pro is good if u dowan wait for bulk..it sure can be use on ur mobo infact it support all kind of mobo The surface area of the blueice is very small, and it comes with a fan. Since i have had enough of those puny chipset fan failing on me, i am going HR-05, if only i don't need to wait for the bulk |
|
|
Sep 25 2006, 12:14 PM
|
|
Junior Member
203 posts Joined: Jan 2003 From: KL / PJ / LYP / IMBI
|
QUOTE(Bliz @ Sep 25 2006, 01:38 AM) The surface area of the blueice is very small, and it comes with a fan. Since i have had enough of those puny chipset fan failing on me, i am going HR-05, if only i don't need to wait for the bulk HR-O5 ready stock at OP LYPThis post has been edited by kvmcom: Sep 25 2006, 12:14 PM |
|
|
Sep 25 2006, 12:18 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(kvmcom @ Sep 25 2006, 12:14 PM) HR-O5 ready stock at OP LYP The problem is i am at Melaka  , looking for anyone selling HR-05 |
|
|
Sep 25 2006, 12:24 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(Bliz @ Sep 25 2006, 12:18 PM) The problem is i am at Melaka http://forum.lowyat.net/index.php?showtopic=337033&st=20 , looking for anyone selling HR-05 pm him and see |
|
|
Sep 25 2006, 12:30 PM
|
Senior Member
835 posts Joined: Sep 2004 From: LYP@Bintang Walk
|
QUOTE(Bliz @ Sep 25 2006, 12:18 PM) The problem is i am at Melaka I can help u on this , looking for anyone selling HR-05 pm me |
|
|
Sep 27 2006, 09:11 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Bliz @ Sep 25 2006, 12:18 PM) The problem is i am at Melaka Well, if u want, i can buy it for you from OP LYP and post it back to you, just pay price of that heatsink together with the postage fees and it'll be yours... , looking for anyone selling HR-05 This post has been edited by sHawTY: Sep 27 2006, 09:12 PM |
|
|
Sep 29 2006, 04:09 AM
|
Senior Member
618 posts Joined: Sep 2006
|
using Zalman ZM-NBF47 on DS3...
Attached thumbnail(s) 
|
|
|
Sep 29 2006, 04:36 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
wer u get the zalman? im waiting n waiting no bulk for it at all
|
|
|
Sep 29 2006, 06:45 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Sep 29 2006, 04:36 AM) wer u get the zalman? im waiting n waiting no bulk for it at all Yeah, i was about to ask the same question oso... And by the way, hey powerslide, do u think that the zalman chipset heatsink would perform better if it comes with a fan? This post has been edited by sHawTY: Sep 29 2006, 06:45 AM |
|
|
Sep 29 2006, 08:32 AM
|
|
Senior Member
618 posts Joined: Sep 2006
|
from JB here, bought at SG for SGD22 hmm around RM50 I think... the CPU cooler is Coolermaster Hyper TX .. SGD49
|
|
|
Sep 29 2006, 11:16 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(juine @ Sep 29 2006, 08:32 AM) from JB here, bought at SG for SGD22 hmm around RM50 I think... the CPU cooler is Coolermaster Hyper TX .. SGD49 That zalman chipset heatsink, can you give us the temperature differences before u change the heatsink and after you've changed it...By the way, is that CM heatsink is Hyper TX? I thought it's name is Hyper 7? Correct me if i'm wrong... ***Thermalright HR-05 at SLS how muchie? [after changed the currency to RM] |
|
|
Sep 29 2006, 01:29 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
ahh..bought from SG but cheap as well..
shawty, mebb ermm 1 to 5C lower temp wid a fan? but 1stly how wana attact a fan on it? eh..going for another hr-05 ar? if u got pigi SG tumpang buy me satu zalman |
|
|
Sep 29 2006, 01:54 PM
|
|
Senior Member
618 posts Joined: Sep 2006
|
not sure about hr-05 ... the zalman performance seem like so so not much different, maybe it didnt fit well or what.. kinda hard to install... -.-
coolermaster hyper tx can check here  is coolermaster nano thermal paste good? that shit cost me like RM30 but so hard to apply.. kinda regret to buy it. Well I'm not into ocing but I tend to run them cool and quiet.. I got a 3k rpm silent fan on the zalman.. here is how I install it.. This post has been edited by juine: Sep 29 2006, 01:56 PM Attached thumbnail(s) 
|
|
|
Sep 29 2006, 02:17 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
Waah, not so much different aa?
Well maybe u've bought the wrong chipset heatsink loo... Since u've alraedy gone to SG, why didn't u buy the one that Uglyvamps sells in his UVNIUM shop in SLS? It's full copper, and for sure it's better than you're zalman... Hey, you live in SG or in Malaysia? If u live in malaysia and goes to SG a lot of times, do PM me, as me and powerslide are kinda interested to buy a thing or two... |
|
|
Sep 29 2006, 03:16 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
yaya..good suggestion shawty
uglyvamp shop got some nice stuff to get..especially the pccooler chipset cooler n good looking 40mm uv fan any lobang do PM me shawty..good thing must share share |
|
|
Sep 29 2006, 05:25 PM
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
guys....stop buying any ohter chipset ccooler....buy the hr-05/hr-05 sli....im using it on my dfi lp experrt and dam its good.... it gets me to only 2 degrees higher than ambient....bt of course theres a fan involved ...its the stock amd fan....heres a picture...
  sorie for the blur pictures... the amd stock fan is the best fan u can use so far ive tested.(of course nt including the tornados and ffb) it beats the 80mm vantec uv, 80mm yate loon, 80mm icute. imo hr-05 is beter than the jing ting coz u can use a variety of fansfor it... 80m,mm-70mm-90mm---they all fit ..just use the right jipties... of bytheway on a dual slot sli dfi expert without the fan u can still run sli....just both cards must be single sot coolers.... bt if use short cards like 7300gt or 7600gt... with fans still can fit... This post has been edited by lolhalol: Sep 29 2006, 05:28 PM |
|
|
Sep 29 2006, 08:43 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
Juine the NBF47 u using, how's the performance? Any good? I been trying to locate it locally but nobody has it
 This post has been edited by Bliz: Sep 29 2006, 08:44 PM |
|
|
Sep 29 2006, 10:11 PM
|
Junior Member
85 posts Joined: Jul 2006 From: Kay Elle
|
tr hr05 izzit compatible for ds3 mobo?
|
|
|
Sep 29 2006, 10:32 PM
|
|
Senior Member
618 posts Joined: Sep 2006
|
what you people using to read the ds3 chipset temp? coz in easytune5 I get around 40c but in everest ultimate edition I get around 33c
the hr05 can fit ds3.. I saw people.. using it in vr-zone.. I live in Jb.. work in Sg and ya.. I often go to SLS when I off days.. ya I can help you guys buy stuff but not the big item like casing or mobo coz kastam is very strict recently due to hari raya... I don't really like those led fan or uv stuff.. coz not really into that anymore.. |
|
|
Sep 29 2006, 11:17 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(csechuan @ Sep 29 2006, 10:11 PM) tr hr05 izzit compatible for ds3 mobo? Yeah compatible i saw some users installing it on their DS3 at xtremesystem's forum |
|
|
Sep 30 2006, 12:05 AM
|
|
Junior Member
85 posts Joined: Jul 2006 From: Kay Elle
|
ooh...dats nice...gotta get 1
|
|
|
Sep 30 2006, 12:53 AM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(juine @ Sep 29 2006, 10:32 PM) what you people using to read the ds3 chipset temp? coz in easytune5 I get around 40c but in everest ultimate edition I get around 33c Is that the temperature u got from the NBF47?I am currently on default HS, temperature around 44-48c according to easytune, hee can help ar? Like that help us buy the NBF47(if it's any good according to u) the hr05 can fit ds3.. I saw people.. using it in vr-zone.. I live in Jb.. work in Sg and ya.. I often go to SLS when I off days.. ya I can help you guys buy stuff but not the big item like casing or mobo coz kastam is very strict recently due to hari raya... I don't really like those led fan or uv stuff.. coz not really into that anymore.. or anybody got cheap lubang for HR-05? OP selling it for RM100 , thought this thing should be around RM80 only This post has been edited by Bliz: Sep 30 2006, 12:55 AM |
|
|
Sep 30 2006, 02:36 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(juine @ Sep 29 2006, 10:32 PM) what you people using to read the ds3 chipset temp? coz in easytune5 I get around 40c but in everest ultimate edition I get around 33c Hey powerslide, we got ourself some good news here!!! the hr05 can fit ds3.. I saw people.. using it in vr-zone.. I live in Jb.. work in Sg and ya.. I often go to SLS when I off days.. ya I can help you guys buy stuff but not the big item like casing or mobo coz kastam is very strict recently due to hari raya... I don't really like those led fan or uv stuff.. coz not really into that anymore.. |
|
|
Sep 30 2006, 12:52 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
@Bliz bro check in the bulk section .... i think got some bulks of this...or start a bulk from an online store ..then we all will piggyback on that ordder ..save some shiping costs... |
|
|
Sep 30 2006, 02:10 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(lolhalol @ Sep 30 2006, 12:52 PM) @Bliz Bulk need to wait damn long, i think at least 2-3 weeks. Now i itchy want push my OC higher bro check in the bulk section .... i think got some bulks of this...or start a bulk from an online store ..then we all will piggyback on that ordder ..save some shiping costs... |
|
|
Sep 30 2006, 03:29 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Bliz @ Sep 30 2006, 02:10 PM) Bulk need to wait damn long, i think at least 2-3 weeks. Now i itchy want push my OC higher You've already got you're self a good XP90C...Isn't that enough? |
|
|
Sep 30 2006, 03:39 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(sHawTY @ Sep 30 2006, 03:29 PM) You've already got you're self a good XP90C... Thinking of changing the northbridge heatsink Isn't that enough? , cos even no OC also hot to touch already |
|
|
Sep 30 2006, 08:15 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Bliz @ Sep 30 2006, 03:39 PM) Thinking of changing the northbridge heatsink Northbridge is an important part that is involved in oc'ing... , cos even no OC also hot to touch already Want better overclocking, go change the heatsink... There's lot of choices for northbridge heatsink nowadays... And for me, the best is still HR-05... |
|
|
Sep 30 2006, 08:34 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(sHawTY @ Sep 30 2006, 08:15 PM) Northbridge is an important part that is involved in oc'ing... Yah HR-05 looks good Want better overclocking, go change the heatsink... There's lot of choices for northbridge heatsink nowadays... And for me, the best is still HR-05... , may i know how much u got yours? This post has been edited by Bliz: Sep 30 2006, 08:35 PM |
|
|
Sep 30 2006, 11:25 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Bliz @ Sep 30 2006, 08:34 PM) Yah HR-05 looks good Err... , may i know how much u got yours? That time i was so desperate to cool down my 975X chipset, so down i go to OP... That time oso i can't find any bulker for HR-05 here in LYN... |
|
|
Oct 1 2006, 12:55 AM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(sHawTY @ Sep 30 2006, 11:25 PM) Err... Ahaks, i also desperate but the price is scaring me off That time i was so desperate to cool down my 975X chipset, so down i go to OP... That time oso i can't find any bulker for HR-05 here in LYN... |
|
|
Oct 2 2006, 03:43 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
@shawty...
hey man me also bought coz of desperado man... my dfi came and nuthin to cool the chipset down.... so went to op to buy.....got riped off bt well the cooling is well worth for the money still... |
|
|
Oct 2 2006, 09:58 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(lolhalol @ Oct 2 2006, 03:43 PM) @shawty... hey man me also bought coz of desperado man... my dfi came and nuthin to cool the chipset down.... so went to op to buy.....got riped off bt well the cooling is well worth for the money still... Seems like there's some number of people here that is also desperate then go to OP... If we're not in desperate mode, then we'll never go to OP leh... |
|
|
Oct 2 2006, 11:23 PM
|
|
Junior Member
85 posts Joined: Jul 2006 From: Kay Elle
|
eh...ds3 mobo 965p series can use hr-05? coz i check the compatibility list nv list down 965 -.-
Compatibility Intel Pentium-4 LGA775 platform Intel: 975X, 955X, 945G, 945P, 945PL, 925X, 925XE, 915G, 915P, 865PE, 848P source : http://www.sidewindercomputers.com/thhrchco.html |
|
|
Oct 2 2006, 11:30 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
can use laa bro..is not about chipset but about how it mount..
since hr-05 support both push pin n hook so no prob at all.. |
|
|
Oct 2 2006, 11:35 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(csechuan @ Oct 2 2006, 11:23 PM) eh...ds3 mobo 965p series can use hr-05? coz i check the compatibility list nv list down 965 -.- Actually i did emailed Thermalright b4, they said it's not supported but then i see ppl fitting it on DS3 without any problem la Compatibility Intel Pentium-4 LGA775 platform Intel: 975X, 955X, 945G, 945P, 945PL, 925X, 925XE, 915G, 915P, 865PE, 848P source : http://www.sidewindercomputers.com/thhrchco.html |
|
|
Oct 2 2006, 11:58 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Bliz @ Oct 2 2006, 11:35 PM) Actually i did emailed Thermalright b4, they said it's not supported but then i see ppl fitting it on DS3 without any problem la This happens because Thermalright didn't even bother to try HR-05 on new motherboards leh... But since you see people fit it on DS3 without any problems, then you can also report to thermalright that HR-05 do fit in DS-3 board...  |
|
|
Oct 3 2006, 12:32 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
haha..TR aso tell me ultra 120 not suitable to use on s478 platform
as a guy n enthusiast we bought it..fix it..cant fix in we mod it! |
|
|
Oct 3 2006, 03:41 AM
|
Senior Member
8,639 posts Joined: Feb 2006 From: Jelutong Penang
|
JUST TAKEOUT FROM BURNED GC.... HEHE
|
|
|
Oct 3 2006, 07:01 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Oct 3 2006, 12:32 AM) haha..TR aso tell me ultra 120 not suitable to use on s478 platform You mean you did try Ultra 120 on socket 478? as a guy n enthusiast we bought it..fix it..cant fix in we mod it! So what happens? Can use ultra 120 on socket 478? |
|
|
Oct 3 2006, 01:39 PM
|
|
Junior Member
85 posts Joined: Jul 2006 From: Kay Elle
|
o...but whr to get 1? lyp boh leh....not yet go op search but u said $$ T___T faster bulk hr05 plz!!!!!!
|
|
|
 Oct 3 2006, 03:12 PM
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
All the chipset cooler you guys talking about is for hign-end motherboard only arr?
My motherboard is ASROCK K7VM2, can any of the cooler mention above use in my motherboard? especially the hr05? |
|
|
Oct 3 2006, 03:15 PM
|
Senior Member
5,065 posts Joined: Jan 2003 From: Taman Tun, KL
|
Why don't you guys go ask Rlhh or his bro elhh if they have any extra stock of HR-05?
I got mine from his first bulk for only RM70. |
|
|
Oct 3 2006, 04:46 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
@powerslide
truer words have nt been spoken  @kataro dude definately can fit...hr-05 imo can fit almost all mobos..coz it has small footprint...bt will block gc if the chipset is near the pci-e slots...ur borad sure can fit as long ur nt using some super sized cooling solution... like the ninja..so join the hr-05 revolution.hehe @evilnickwong dat is a great price man.... i bough mine for 110...somore after they discount me... dam op@shawty man things we do when ur in love (desperate)anyway has anyone tried using peltier on the chipset? specificly a 65wt ...coz uglyvamp selling only bout 40 bucks if im nt mistaken.... should be good right....hmm... imagine that hr-05 with pelt... This post has been edited by lolhalol: Oct 3 2006, 04:48 PM |
|
|
Oct 3 2006, 05:40 PM
|
|
Senior Member
1,159 posts Joined: Jan 2003 From: the other side of malaysia
|
Get HR-05 SLI if the older/normal version doesnt fit, just a few ringgit difference only.
|
|
|
Oct 3 2006, 06:02 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
bro his board dificult to fit the sli version lah
..if he using a gc got no space to go any direction...if point up , proc hsf block,point down, gc block, point backwards gc or capacitors still block,point towards the front, block by ram and gc... This post has been edited by lolhalol: Oct 3 2006, 06:06 PM |
|
|
Oct 3 2006, 06:08 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(evilnickwong @ Oct 3 2006, 03:15 PM) Why don't you guys go ask Rlhh or his bro elhh if they have any extra stock of HR-05? That is a great price, but this time buy sure kena tax I got mine from his first bulk for only RM70. . All his bulk item being taxed as well  |
|
|
Oct 3 2006, 06:21 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
shawty,
din tried yet..no budget yet to get a ultra 120 if u guys cant get hr-05 jus mod laa..get a 40mm fan n screw it onto the stock sink.. |
|
|
Oct 3 2006, 11:42 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Oct 3 2006, 06:21 PM) shawty, Mod a HR-05 din tried yet..no budget yet to get a ultra 120 if u guys cant get hr-05 jus mod laa..get a 40mm fan n screw it onto the stock sink.. Err... I will never do such things... Sayang gile beb... |
|
|
Oct 4 2006, 12:24 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
hr-05 sure wont mod laa
other cheap alternative can chop or glue or watever can think of |
|
|
 Oct 4 2006, 06:53 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(lolhalol @ Oct 3 2006, 04:46 PM) @kataro Thanks lolhalol for the info dude definately can fit...hr-05 imo can fit almost all mobos..coz it has small footprint...bt will block gc if the chipset is near the pci-e slots...ur borad sure can fit as long ur nt using some super sized cooling solution... like the ninja..so join the hr-05 revolution.hehe . I have check my motherboard, got space for it . I can't have SLI as my motherboard is old AGP 4x slot board.I wanna ask, how to fix this cooler into the motherboard leh. As I see from their website, it's base do not have anything to fix it on to the chipset. I mean, it is come with pin hole or maybe screw or else? |
|
|
Oct 4 2006, 07:47 PM
|
|
Senior Member
1,159 posts Joined: Jan 2003 From: the other side of malaysia
|
QUOTE(lolhalol @ Oct 3 2006, 06:02 PM) bro his board dificult to fit the sli version lah I dont think facing the IO plate will be blocked because AFAIK, the chipset cooler is taller than the standard caps. ..if he using a gc got no space to go any direction...if point up , proc hsf block,point down, gc block, point backwards gc or capacitors still block,point towards the front, block by ram and gc...P/s : I don't think theres a need for HR-05 on this motherboard anyway, not worth to get it on a low end board because there won't be much difference, save the money and get a better board. This post has been edited by Rlhh: Oct 4 2006, 07:49 PM |
|
|
Oct 4 2006, 09:41 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Rlhh @ Oct 4 2006, 07:47 PM) I dont think facing the IO plate will be blocked because AFAIK, the chipset cooler is taller than the standard caps. Yup, that's right...P/s : I don't think theres a need for HR-05 on this motherboard anyway, not worth to get it on a low end board because there won't be much difference, save the money and get a better board. The original heatsink is enought for that chipset... |
|
|
Oct 4 2006, 09:57 PM
|
Senior Member
1,885 posts Joined: Jan 2005 From: Sydney / Penang
|
QUOTE(sHawTY @ Oct 4 2006, 09:41 PM) Yup, that's right... agree, get a 40mm fan and put on top of the stock heatsink will doThe original heatsink is enought for that chipset... |
|
|
Oct 5 2006, 09:07 AM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(lolhalol @ Oct 3 2006, 06:02 PM) bro his board dificult to fit the sli version lah are this statement direct to me? ..if he using a gc got no space to go any direction...if point up , proc hsf block,point down, gc block, point backwards gc or capacitors still block,point towards the front, block by ram and gc... my board is not this one, mine one have 3 PCI and have SDRAM & DDR RAM slot.QUOTE I dont think facing the IO plate will be blocked because AFAIK, the chipset cooler is taller than the standard caps. P/s : I don't think theres a need for HR-05 on this motherboard anyway, not worth to get it on a low end board because there won't be much difference, save the money and get a better board. So mean I do not need to buy a cooler for my nb right? T: I have another question. When I check using speedfan, it will show there temp1 and temp2, as I has test, the temp2 is for my processor temperature, so the temp1 is for? Normally how you guys know which one is for which item leh? Edited to add: forget to tell, the temp1 temperature is around 61C to 63C, so hot... temp1 lower is 39C and highest is ~47CThis post has been edited by Kataro: Oct 5 2006, 09:23 AM |
|
|
Oct 5 2006, 11:58 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Kataro @ Oct 5 2006, 09:07 AM) are this statement direct to me? Why don't u use an easier way to find out the temperature of you're processor and chipset? my board is not this one, mine one have 3 PCI and have SDRAM & DDR RAM slot.So mean I do not need to buy a cooler for my nb right? T: I have another question. When I check using speedfan, it will show there temp1 and temp2, as I has test, the temp2 is for my processor temperature, so the temp1 is for? Normally how you guys know which one is for which item leh? Edited to add: forget to tell, the temp1 temperature is around 61C to 63C, so hot... temp1 lower is 39C and highest is ~47CWanna know how? Easy, go get you'reself PC Wizard 2006 Here you go: http://www.cpuid.com/pcwizard.php Click on the link, then go to the bottom of the page, then download it, install it, run it then click on the icon that looks like a "meter" that has positive and negative symbols in the icons... Got that? Now go download, install then run it to know the temperature of you're processor and norhtbridge... |
|
|
Oct 5 2006, 03:04 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(sHawTY @ Oct 5 2006, 11:58 AM) Why don't u use an easier way to find out the temperature of you're processor and chipset? Dear sHawTY, thanks for the info Wanna know how? Easy, go get you'reself PC Wizard 2006 Here you go: http://www.cpuid.com/pcwizard.php Click on the link, then go to the bottom of the page, then download it, install it, run it then click on the icon that looks like a "meter" that has positive and negative symbols in the icons... Got that? Now go download, install then run it to know the temperature of you're processor and norhtbridge... . I am noob in all this thing, so I do not know how to check all the temperature. Even the speedfan also I read from this forum. I will download and install it when I back home to see what my processor and northbridge. Thanks a lot. |
|
|
Oct 5 2006, 04:18 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
@ kataro
dude can u post a link to ur boards specs..then we can help u out beter...or post a picture.... and also afaik most mobos(99%) have a way to mount the cooler on.... its either pushpin(amd) or the intel way ,, forgot wats it called. |
|
|
 Oct 5 2006, 08:41 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(lolhalol @ Oct 5 2006, 04:18 PM) @ kataro here is the link K7VM2.dude can u post a link to ur boards specs..then we can help u out beter...or post a picture.... and also afaik most mobos(99%) have a way to mount the cooler on.... its either pushpin(amd) or the intel way ,, forgot wats it called. I already have a small fan to blow the northbridge, just thinking of maybe add a better cooler will make the performance better. But Rlhh say there will be no different even if I fix a hr-05 on it, so maybe I just stay with my current cooler and fan lor. Anyway, thanks for you guys input and advise... |
|
|
Oct 6 2006, 08:18 AM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
I had test with the PC Wizard, my processor temp is ~40C - 42C, and the motheboard temp is 62C all the way. I found that my BIOS did not show the temp correctly, it show that my processor have 62C and the chasis temp 41C
. It is opposite with what show by the PC Wizard. I then check it by slow down a bit my processor fan, my processor temp will increase 1C from 40C to 41C. So, I believe PC Wizard show the correct temp and rpm for my processor & motherboard.BTW, the motherboard temp show in PC Wizard is the northbridge temp is it? 62C is very hot right? Is it normal?  |
|
|
Oct 6 2006, 12:36 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Kataro @ Oct 6 2006, 08:18 AM) I had test with the PC Wizard, my processor temp is ~40C - 42C, and the motheboard temp is 62C all the way. I found that my BIOS did not show the temp correctly, it show that my processor have 62C and the chasis temp 41C Yup, the motherboard temp shows to the northbridge chipset... . It is opposite with what show by the PC Wizard. I then check it by slow down a bit my processor fan, my processor temp will increase 1C from 40C to 41C. So, I believe PC Wizard show the correct temp and rpm for my processor & motherboard.BTW, the motherboard temp show in PC Wizard is the northbridge temp is it? 62C is very hot right? Is it normal? 62, it's kinda hot... U might wanna change u're heatsink into this: http://forum.lowyat.net/index.php?showtopi...671&hl=evercool Trust me, it'll cool you're chipset more than what you think... So, no need to go so high end chipset cooler loh... |
|
|
Oct 6 2006, 02:58 PM
|
|
Senior Member
1,159 posts Joined: Jan 2003 From: the other side of malaysia
|
Pushpin type doesnt belong to AMD, or the clip method. Its all up to the motherboard manufacturers to decide which to use, none of them "owns" a specific kind of mounting method.
Even if you get a chipset cooler, you dont need anything highend unless you plan to overclock your computer or theres something wrong with your computer. If both of those arent related to you theres no point upgrading it, no point from my point of view of course. |
|
|
Oct 6 2006, 03:31 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(sHawTY @ Oct 6 2006, 12:36 PM) Yup, the motherboard temp shows to the northbridge chipset... ic, thanks for the info sHawTY 62, it's kinda hot... U might wanna change u're heatsink into this: http://forum.lowyat.net/index.php?showtopi...671&hl=evercool Trust me, it'll cool you're chipset more than what you think... So, no need to go so high end chipset cooler loh... . This heatsink very good is it? I might want to change it but not that soon. Currently quite broke...still wait for salary to come out...Thanks. @Rlhh, thanks for your info too. |
|
|
Oct 6 2006, 06:17 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
@kataro
bro the evercool is preety good...not just god..its is veryvery good..bt jsut doenst beet the hr-05..imo |
|
|
Oct 8 2006, 03:25 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(lolhalol @ Oct 6 2006, 06:17 PM) @kataro Offcourse...bro the evercool is preety good...not just god..its is veryvery good..bt jsut doenst beet the hr-05..imo That thing can never beat HR-05... But, it should be enough for that old chipset... |
|
|
 Oct 8 2006, 09:48 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE @kataro bro the evercool is preety good...not just god..its is veryvery good..bt jsut doenst beet the hr-05..imo QUOTE(sHawTY @ Oct 8 2006, 03:25 AM) Offcourse... OK, thanks for both your advice and info. I will change to that cooler first until next time I change my whole system, then only use hr-05... That thing can never beat HR-05... But, it should be enough for that old chipset... emm...still need ask something....since my board is old, will the performance better after I fix that cooler to it? just wanna make sure before buy it...now very broke ler...need to think twice before buy... |
|
|
Oct 9 2006, 04:29 AM
|
|
Senior Member
8,639 posts Joined: Feb 2006 From: Jelutong Penang
|
emm... any body use this mobo...
Gigabyte GA-K8NF-9... its got toooo hot during operation...(venice 3000) even with minor OC.... and how to cool it down.... i cant even try to OC it to 2Ghz and its purple dimm slot cant work in dual channel... just orange one.. This post has been edited by salimbest83: Oct 9 2006, 04:36 AM Attached thumbnail(s) 
|
|
|
Oct 9 2006, 11:50 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(salimbest83 @ Oct 9 2006, 04:29 AM) emm... any body use this mobo... Boy, what's the thing are u talking about here?Gigabyte GA-K8NF-9... its got toooo hot during operation...(venice 3000) even with minor OC.... and how to cool it down.... i cant even try to OC it to 2Ghz and its purple dimm slot cant work in dual channel... just orange one.. What's hot? The processor or the chipset heatsink? If the processor, then change the processor heatsink liao... If the chipset, then change the chipset heatsink liao, it's that simple... About the purple dimm can work in dual channel, why don't u try flashing the bios to the latest one, i suspect that the bios might be corrupted... Just my suggestion though... |
|
|
Oct 9 2006, 04:01 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
@kataro
bro dis depends..theres too many variables to consider... neway looks like its not gona help much coz most old chipsets dun need much cooling anyway..bt if u really intend to buy a chipset cooler... remember to get universal coolers ..like those that let u use the push pin or the other method...the hr-05 for examle the evercool from the looks of it only uses pushpin so might nt be compatible with most intel mobos.... ( i bet ur nxt system upgradew wiill be a conrow) ...all in all its down to u actually..bt i still stongly recomend the hr-05 over the evercool...looks,performance,and future proof...@salimbest83 dude need more details man... wats hot? if u wan us to help u ...pls give more details....thx This post has been edited by lolhalol: Oct 9 2006, 04:02 PM |
|
|
Oct 9 2006, 07:36 PM
|
|
Senior Member
8,639 posts Joined: Feb 2006 From: Jelutong Penang
|
QUOTE(sHawTY @ Oct 9 2006, 11:50 AM) Boy, what's the thing are u talking about here? What's hot? The processor or the chipset heatsink? If the processor, then change the processor heatsink liao... If the chipset, then change the chipset heatsink liao, it's that simple... About the purple dimm can work in dual channel, why don't u try flashing the bios to the latest one, i suspect that the bios might be corrupted... Just my suggestion though... QUOTE(lolhalol @ Oct 9 2006, 04:01 PM) @salimbest83 dude need more details man... wats hot? if u wan us to help u ...pls give more details....thx cpu good... just around 35-45 in operation.. im using venice 3000+ 2*512 ddr333 KVR GC detected asus x300/x550(dont know exact model )(324core/194ram) cant OC this MB lah... Prone to hang... |
|
|
Oct 9 2006, 09:05 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(salimbest83 @ Oct 9 2006, 07:36 PM) the chipset one.. got too hot(~65-70)...even after load optimized setting... Then go change the chipset heatsink liao...cpu good... just around 35-45 in operation.. Use Thermalright HR-05 SLi... Don't buy the normal HR-05, coz it can't be fitted on you're motherboard... Yes, you can, but it will block the PCi-E card... So, go get you're own HR-05 SLi... |
|
|
Oct 9 2006, 11:02 PM
|
Senior Member
1,561 posts Joined: Jan 2003 From: 秋葉原電気街
|
why no one mention about swiftec's MCX159-CU ar...i think its a very nice chipset cooler too
|
|
|
 Oct 10 2006, 01:11 AM
|
|
Senior Member
8,639 posts Joined: Feb 2006 From: Jelutong Penang
|
QUOTE(sHawTY @ Oct 9 2006, 09:05 PM) Then go change the chipset heatsink liao... Use Thermalright HR-05 SLi... Don't buy the normal HR-05, coz it can't be fitted on you're motherboard... Yes, you can, but it will block the PCi-E card... So, go get you're own HR-05 SLi... QUOTE(sup3rfly @ Oct 9 2006, 11:02 PM) why no one mention about swiftec's MCX159-CU ar...i think its a very nice chipset cooler too so how much for both cooler... my budget is really2 low....car down...washing machine down...raya oso coming...need to balik kampung.. |
|
|
Oct 10 2006, 08:02 AM
|
|
Senior Member
1,561 posts Joined: Jan 2003 From: 秋葉原電気街
|
QUOTE(salimbest83 @ Oct 10 2006, 01:11 AM) so how much for both cooler... my budget is really2 low....car down...washing machine down...raya oso coming...need to balik kampung.. HR-05 quoted at USD17.95(non sli) and andUSD24.95(sli) and swiftec quoted at USD34.80 in sidewinder computers i m not sure about the availability about both.... i only spotted CM blue ice in All IT |
|
|
Oct 10 2006, 08:44 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(sup3rfly @ Oct 10 2006, 08:02 AM) HR-05 quoted at USD17.95(non sli) and andUSD24.95(sli) and swiftec quoted at USD34.80 in sidewinder computers You're not going for HR-05 for you're motherboard, coz it won't fit...i m not sure about the availability about both.... i only spotted CM blue ice in All IT Trust me, you're not going to do that, or else you will regret it... The only thing that fits with you're board is either HR-05 SLi or Jingting Forcetake.. Ahh, and another thing, DO NOT even think of using the blue ice, it sucks to the max... When i use it for my board, it didn't work well, infact, my passive no fan northbridge heatsink works even better than the Blue Ice... The availability of HR-05 and HR-05 SLi here is at Overclockers Paradise, but trust me, you don't want to buy from that shop coz the price is so damn high... Everyone here knows that... Why don't u go for RLHH Sidewinder bulk? It's cheaper than anywhere you can find... Trust me, that HR-05 and HR-05 SLI from sidewinder bulk is cheap... Not just cheap, it's too cheap if you're comparing it with overclockers paradise shop price... |
|
|
Oct 10 2006, 04:04 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(lolhalol @ Oct 9 2006, 04:01 PM) @kataro bro dis depends..theres too many variables to consider... neway looks like its not gona help much coz most old chipsets dun need much cooling anyway..bt if u really intend to buy a chipset cooler... remember to get universal coolers ..like those that let u use the push pin or the other method...the hr-05 for examle the evercool from the looks of it only uses pushpin so might nt be compatible with most intel mobos.... ( i bet ur nxt system upgradew wiill be a conrow) ...all in all its down to u actually..bt i still stongly recomend the hr-05 over the evercool...looks,performance,and future proof... ya, you are right....the next system I wanna buy is conroe... hmmm...since is that case, I better buy hr-05 so that I don't need to buy again next time i buy the new system...but currently I am very broke...and the hr-05 is a bit expensive... ...maybe wait till another 1 or 2 month... Edited to add: Since I will build conroe system next time, so maybe will have sli too...so do you think I should buy hr-05 or hr-05 sli? This post has been edited by Kataro: Oct 10 2006, 04:12 PM |
|
|
Oct 10 2006, 05:05 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
@kataro
bro both are almost similar..bt imo the hr-05 is beter coz the heat has less distance to travel in the heat pipe to the fins..bt the sli version is also good as it is more compatible with more motherboareds.... |
|
|
Oct 10 2006, 05:06 PM
|
|
Senior Member
1,561 posts Joined: Jan 2003 From: 秋葉原電気街
|
u really need n/b cooler for conroe system...ppl says it helps to give a few fsb more
i m using a 60mm fan blowing on my asus original n/b chipset dun think it sufficient enough also |
|
|
Oct 10 2006, 06:34 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(lolhalol @ Oct 10 2006, 05:05 PM) @kataro ic...that will be great...but I just search for the hr-05 sli from thermalright website and found that the sli one might be too big for my current motherboard where it will block by the cpu cooler or the gc or the ram... bro both are almost similar..bt imo the hr-05 is beter coz the heat has less distance to travel in the heat pipe to the fins..bt the sli version is also good as it is more compatible with more motherboareds.... maybe I should buy hr-05 first, then next time change to hr-05 sli and the hr-05 maybe can put on southbridge, hopefully... |
|
|
Oct 10 2006, 06:50 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Kataro @ Oct 10 2006, 06:34 PM) ic...that will be great...but I just search for the hr-05 sli from thermalright website and found that the sli one might be too big for my current motherboard where it will block by the cpu cooler or the gc or the ram... ??? maybe I should buy hr-05 first, then next time change to hr-05 sli and the hr-05 maybe can put on southbridge, hopefully... You've got it wrongly... If u're using a motherboard that is Intel chipset based motherboard, then the normal HR-05 is the best for the northbridge... While the southbridge, it's better for you to use the HR-05 SLI... |
|
|
Oct 10 2006, 11:59 PM
|
|
Senior Member
8,639 posts Joined: Feb 2006 From: Jelutong Penang
|
[/quote] Why don't u go for RLHH Sidewinder bulk? It's cheaper than anywhere you can find... Trust me, that HR-05 and HR-05 SLI from sidewinder bulk is cheap... Not just cheap, it's too cheap if you're comparing it with overclockers paradise shop price... [/quote] emm where is that sidewinder bulk... |
|
|
Oct 11 2006, 02:08 AM
|
Senior Member
734 posts Joined: Feb 2006 From: Selangor
|
cheap if u dont kena tax....which i did...sigh..
|
|
|
Oct 11 2006, 12:21 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(sHawTY @ Oct 10 2006, 06:50 PM) ??? oic, so I can buy hr-05 for my northbridge first lor You've got it wrongly... If u're using a motherboard that is Intel chipset based motherboard, then the normal HR-05 is the best for the northbridge... While the southbridge, it's better for you to use the HR-05 SLI... ...my board now is use via chipset...next time I think I will use Intel chipset de...hehe...great..but I need to save some money first... |
|
|
Oct 11 2006, 12:33 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(salimbest83 @ Oct 10 2006, 11:59 PM) QUOTE Why don't u go for RLHH Sidewinder bulk? It's cheaper than anywhere you can find... Trust me, that HR-05 and HR-05 SLI from sidewinder bulk is cheap... Not just cheap, it's too cheap if you're comparing it with overclockers paradise shop price... This post has been edited by Kataro: Oct 11 2006, 12:34 PM |
|
|
Oct 11 2006, 01:10 PM
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
Just curious...apasal u guys need so power punya chipset cooler?
|
|
|
Oct 15 2006, 05:15 PM
|
|
Senior Member
8,639 posts Joined: Feb 2006 From: Jelutong Penang
|
don no la....
but my chipset cooler now is damm hot....60-70... |
|
|
Oct 15 2006, 05:59 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(sniper on the roof @ Oct 11 2006, 01:10 PM) Just curious...apasal u guys need so power punya chipset cooler? Because i love my motherboard... I don't want it to die because of the northbridge chipset got burn because oc so high, then it got so hot then, burned... Don't want it to happen liao... |
|
|
Oct 15 2006, 09:34 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
here u go my setup
NB cooled by zalman zm-nbf47(Thanks to ksl ) + 5v high speed blowerSB cooled by pc cooler nb-400cu(Thanks to gary )  nb temp getting better as not hotter as b4,cant measure as i don have thermometer but too sad my chipset hit higher fsb edi..cant go any further although change cooler edited:the pc cooler cant fit in nb seriously,i fit it in sb with some bended fins This post has been edited by coolice: Oct 15 2006, 09:39 PM |
|
|
Oct 15 2006, 09:46 PM
|
|
Senior Member
734 posts Joined: Feb 2006 From: Selangor
|
how'd you get ur hand on those zalman zm-nbf47?
|
|
|
Oct 16 2006, 10:52 AM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(salimbest83 @ Oct 15 2006, 05:15 PM) don no la.... but my chipset cooler now is damm hot....60-70... QUOTE(sHawTY @ Oct 15 2006, 05:59 PM) Because i love my motherboard... Even the hottest chipset also around ~10W niah. I think in most cases it would be an issue of: I don't want it to die because of the northbridge chipset got burn because oc so high, then it got so hot then, burned... Don't want it to happen liao... 1) Cacing wires all over the place = airflow issue 2) Improper assembly/mounting of the stock cooler. Rather than the stock sink itself. Personally I think changing to a huge a$$ aftermarket cooler is more bling rather than anything....or for quietness. Besides...hardly anybody ever kill their boards from overcooked chipset. |
|
|
Oct 16 2006, 10:55 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
Sniper, oc won't be affected because of hot chipset?
Sorry, newbie here asking for some knowledge... |
|
|
Oct 16 2006, 11:12 AM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(sHawTY @ Oct 16 2006, 10:55 AM) Sniper, oc won't be affected because of hot chipset? Obviously if taruh Vmch kau kau... = a hotter chipset lar Sorry, newbie here asking for some knowledge... But you don't need a HR for this... personally I always just replace the stock thermal crap and at most pop a fan that blows around the area kau tim already. High temps of course is not good but I still that in most cases here, it's an airflow issue.... having lotsa huge towers is not gonna help. Sure..it brings the heat upwards but what this also means is there's no air going around the surface of the board...to the even hotter area --> PWM. For those DS3 crowd... pop a cheapo 40mm fan and whack some AS5 kau tim di For those heatpiped crowd (like P5B-Dlx) ...just remove the glued on coverings already kau tim. |
|
|
Oct 16 2006, 11:56 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
coolice,
mana u get the zalman? aiseh..wan it so badly.. |
|
|
Oct 16 2006, 12:53 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(sniper on the roof @ Oct 16 2006, 10:52 AM) 1) Cacing wires all over the place = airflow issue |
|
|
Oct 16 2006, 01:04 PM
|
|
VIP
23,414 posts Joined: Jan 2003 From: Taipei
|
QUOTE(Kataro @ Oct 16 2006, 12:53 PM) For capalang casing & capalang psu like mine, this is always an issue...the space is small...the cable is short and not enough for put many fan... It's not a matter of capalang casing or psu lar... Cable length issue = http://www.usb-ware.com/power-y-splitter.htm |
|
|
Oct 16 2006, 01:30 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(sniper on the roof @ Oct 16 2006, 01:04 PM) It's not a matter of capalang casing or psu lar... Cable length issue = http://www.usb-ware.com/power-y-splitter.htm T:now the psu really issue to me...it is not stable and when I add more fan to it, it become even more unstable...mine only 350w and it is not true power...so what you think...last time I have 400w which come with casing but spoil already...even stable than current one...my fault coz want to buy it cheap (350w)...only RM40 niah... Edited to add: I just found out that there is no more Enermax FMA 460w sold at lowyat... This post has been edited by Kataro: Oct 16 2006, 04:32 PM |
|
|
Oct 19 2006, 07:41 PM
|
Junior Member
415 posts Joined: Jan 2003 From: Clunk Valley
|
i personally recommend thermalright products.. i uses thermalright NB-1 for my n'bridge n thermalright XP90 for my CPU..
|
|
|
Oct 20 2006, 07:59 AM
|
|
Senior Member
5,341 posts Joined: Jan 2003
|
QUOTE(sniper on the roof @ Oct 16 2006, 11:12 AM) Obviously if taruh Vmch kau kau... = a hotter chipset lar I agree with you.PWM area is very hot....I heard my fren he said he paste some heatzink on the area for his mobo and he told me that this method helps....But you don't need a HR for this... personally I always just replace the stock thermal crap and at most pop a fan that blows around the area kau tim already. High temps of course is not good but I still that in most cases here, it's an airflow issue.... having lotsa huge towers is not gonna help. Sure..it brings the heat upwards but what this also means is there's no air going around the surface of the board...to the even hotter area --> PWM. For those DS3 crowd... pop a cheapo 40mm fan and whack some AS5 kau tim di For those heatpiped crowd (like P5B-Dlx) ...just remove the glued on coverings already kau tim. |
|
|
Oct 20 2006, 10:20 AM
|
VIP
15,903 posts Joined: Jan 2003 From: Miri
|
it's heatsink... not heatzink
|
|
|
Oct 20 2006, 02:21 PM
|
|
Senior Member
5,341 posts Joined: Jan 2003
|
QUOTE(soulfly @ Oct 20 2006, 10:20 AM) it's heatsink... not heatzink Hehe,sorry wrong grammer mistake. |
|
|
Oct 27 2006, 05:06 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
http://forum.lowyat.net/index.php?showtopi...4&#entry8922284
for those hu wanted to get the hr-05 bt dun want to pay thru ur nose at opp ...RM95 excluding shiping is preety good deal since rlhh bulk has not got moving yet....bt those hu can wait i suggest waiting for rlh or pm him to c if he has old stock coz his prices is very cheap... |
|
|
Nov 2 2006, 05:25 PM
|
|
Senior Member
734 posts Joined: Feb 2006 From: Selangor
|
moderno finally bring in the zalman zm-nbf47 "blue flower" cooler, cheap too....
|
|
|
Nov 3 2006, 11:16 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(seanl @ Nov 2 2006, 05:25 PM) moderno finally bring in the zalman zm-nbf47 "blue flower" cooler, cheap too.... I've heard that it is not a real performer if compared to other 3rd party chipset heatsink leh...To add up, the price is kinda higher liao... |
|
|
Nov 4 2006, 10:40 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
I've just meet with uglyvamp today...
And bought a PC Cooler NB 400CU from him... Gonna test head to head with Thermalright HR-05... See either the NB 400CU can at lease compete with HR-05... |
|
|
Nov 4 2006, 11:36 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(sHawTY @ Nov 4 2006, 10:40 PM) I've just meet with uglyvamp today... Hope to hear from you soon And bought a PC Cooler NB 400CU from him... Gonna test head to head with Thermalright HR-05... See either the NB 400CU can at lease compete with HR-05... doubt that NB400CU will be even 80% of HR-05 |
|
|
Nov 4 2006, 11:51 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Bliz @ Nov 4 2006, 11:36 PM) Hope to hear from you soon Not soon enough liao... doubt that NB400CU will be even 80% of HR-05 My ASUS P5WD2-E Premium board is sent to taiwan, why? Because i've checked with cycom today, and read a letter of report from their distributor myself that they don't have the stock of that motherboard to replace my motherboard... This is what they said: The fastest is either 2 - 3 weeks... Now, i'm using an Intel 945GNT motherboard [Backup motherboard for my PC] I can't use either HR-05 or NB 400CU on this motherboard as the orientation of the heatsink is not normal [It's longer ]If you google up some pictures of the 945GNT motherboard, then you'll understand what i'm trying to explain here... This post has been edited by sHawTY: Nov 4 2006, 11:54 PM |
|
|
Nov 22 2006, 11:35 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
noctua chipset cooler..awesome looking but maciam copy TR hr-05
http://www.noctua.at/main.php?show=presse_...ws_id=23&lng=en http://www.noctua.at/inc/imageviewer.php?item=7&pnr=1   |
|
|
Nov 22 2006, 11:41 AM
|
Senior Member
1,052 posts Joined: Oct 2006 From: Malaysia
|
QUOTE(PowerSlide @ Nov 22 2006, 11:35 AM) noctua chipset cooler..awesome looking but maciam copy TR hr-05 yea....looks like Thermalright product. http://www.noctua.at/main.php?show=presse_...ws_id=23&lng=en http://www.noctua.at/inc/imageviewer.php?item=7&pnr=1 have you tested it? |
|
|
Nov 22 2006, 11:44 AM
|
Senior Member
3,159 posts Joined: Dec 2004 From: >Taiping,Perak<
|
QUOTE(id86 @ Nov 22 2006, 11:41 AM) yea....looks like Thermalright product. It's not available in Malaysia yet. have you tested it? |
|
|
Nov 22 2006, 11:57 AM
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sHawTY @ Nov 3 2006, 11:16 PM) I've heard that it is not a real performer if compared to other 3rd party chipset heatsink leh... Well, at RM38, its quite a buy if u ask me..I got that northbridge cooler. I must say this cant be compared to the likes of Thermalright and some higher end products.Its alluminium compared to the copper in others but it does the job for me.Changed it for my stock northbridge cooler and so far, it does not dissapoint although i had yet to try other product yet...To add up, the price is kinda higher liao... |
|
|
Nov 22 2006, 12:27 PM
|
|
Senior Member
1,052 posts Joined: Oct 2006 From: Malaysia
|
QUOTE(akachester @ Nov 22 2006, 11:57 AM) Well, at RM38, its quite a buy if u ask me..I got that northbridge cooler. I must say this cant be compared to the likes of Thermalright and some higher end products.Its alluminium compared to the copper in others but it does the job for me.Changed it for my stock northbridge cooler and so far, it does not dissapoint although i had yet to try other product yet... yeah...all other high end product price more than that.most of them using copper |
|
|
Nov 22 2006, 01:45 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Nov 22 2006, 11:35 AM) noctua chipset cooler..awesome looking but maciam copy TR hr-05 Woot!!! http://www.noctua.at/main.php?show=presse_...ws_id=23&lng=en http://www.noctua.at/inc/imageviewer.php?item=7&pnr=1 This is the chipset heatsink i've been looking for all over this time!!! I've seen it somewhere before, but didn't remember where... Uhh uhh, can anyone bulk this heatsink??? Calling for RLHH! Calling for RLHH! |
|
|
Nov 22 2006, 04:13 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
i aso wana test but unless i live in austria or someone give me free no way i can hav one
shawty, interesting eh.. i aso like the cpu cooler..but both product aso look similar to TR ultra 120 n hr-05 |
|
|
Nov 22 2006, 04:20 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Nov 22 2006, 04:13 PM) i aso wana test but unless i live in austria or someone give me free no way i can hav one Err........... shawty, interesting eh.. i aso like the cpu cooler..but both product aso look similar to TR ultra 120 n hr-05 CPU Cooler? Which one? |
|
|
Nov 22 2006, 04:24 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
|
|
|
Nov 22 2006, 04:34 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Nov 22 2006, 04:24 PM) Owh, you're talking about this... Yes, it does look nice... The look, looks are the same like Ultra 120 and HR-01... 8 heatpipes... |
|
|
Nov 22 2006, 04:39 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
nobody bulk no way to get it..plus noctua still a rare brand..not many online site selling it but one thing..i hate the name..noctua = knock tua |
|
|
Nov 22 2006, 04:40 PM
|
Senior Member
2,162 posts Joined: Sep 2004
|
wow nowadays Chipset cooler also become bigger and bigger , HR05
|
|
|
Nov 22 2006, 04:54 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
blame the overclocking frenzy nowdays..from cpu to chipset to vga all need alot V
|
|
|
Nov 22 2006, 07:47 PM
|
Senior Member
1,098 posts Joined: Oct 2004
|
QUOTE(sHawTY @ Nov 22 2006, 04:34 PM) Owh, you're talking about this... 8 meh? I thought 4 in U shape Yes, it does look nice... The look, looks are the same like Ultra 120 and HR-01... 8 heatpipes... |
|
|
Nov 22 2006, 08:39 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(neoxz @ Nov 22 2006, 07:47 PM) 8 meh? I thought 4 in U shape Sama la tu...Then, why do CoolerMaster calls hyper 6+ as hyper 6? When in the real world, it utilize 3 heatpipes in u shape? No? |
|
|
Nov 22 2006, 08:59 PM
|
|
Senior Member
1,098 posts Joined: Oct 2004
|
QUOTE(sHawTY @ Nov 22 2006, 08:39 PM) Sama la tu... Where got same? u gila ka? next time u do garage sale, i buy from u half price laThen, why do CoolerMaster calls hyper 6+ as hyper 6? When in the real world, it utilize 3 heatpipes in u shape? No? |
|
|
Nov 22 2006, 09:18 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(neoxz @ Nov 22 2006, 08:59 PM) Where got same? u gila ka? next time u do garage sale, i buy from u half price la Err...What do you mean by saying that? Ok, here's what i'm trying to explain earlier... Ok, CoolerMaster Hyper 6 & Hyper 6+ utilize 3 heatpipe in U shapes, but, they said that it uses 6 heatpipes So basically, i'm not at all wrong... If CoolerMaster can call that heatsink that uses 3 heatpipe by the name of Hyper 6, then i want to say that heatsink as utilizing 8 heatpipe... |
|
|
Nov 22 2006, 10:38 PM
|
|
Senior Member
1,098 posts Joined: Oct 2004
|
QUOTE(sHawTY @ Nov 22 2006, 09:18 PM) Err... How do u know it's not 6 heatpipes all together leh? Y must u assume that it's 3 heatpipes in U for coolermaster?. Then y is scythe ninja's reviews stating that it's using 6 heatpipes? lol ... 1 heatpipe in U shape is still 1 heatpipe la .... What do you mean by saying that? Ok, here's what i'm trying to explain earlier... Ok, CoolerMaster Hyper 6 & Hyper 6+ utilize 3 heatpipe in U shapes, but, they said that it uses 6 heatpipes So basically, i'm not at all wrong... If CoolerMaster can call that heatsink that uses 3 heatpipe by the name of Hyper 6, then i want to say that heatsink as utilizing 8 heatpipe... This post has been edited by neoxz: Nov 22 2006, 10:42 PM |
|
|
Nov 22 2006, 10:50 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(neoxz @ Nov 22 2006, 10:38 PM) How do u know it's not 6 heatpipes all together leh? Y must u assume that it's 3 heatpipes in U for coolermaster?. Then y is scythe ninja's reviews stating that it's using 6 heatpipes? lol ... 1 heatpipe in U shape is still 1 heatpipe la .... Soalan Pulang Paku Buah Keras:Then, how u know that noctua heatsink is 4 heatpipes in u shapes not 8 heatpipes? This post has been edited by sHawTY: Nov 22 2006, 10:51 PM |
|
|
Nov 22 2006, 11:18 PM
|
|
Senior Member
1,098 posts Joined: Oct 2004
|
QUOTE(sHawTY @ Nov 22 2006, 10:50 PM) Soalan Pulang Paku Buah Keras: Because stated there on the website that it's 4 heatpipes. ???? hahahhaha Then, how u know that noctua heatsink is 4 heatpipes in u shapes not 8 heatpipes? |
|
|
Nov 22 2006, 11:26 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(neoxz @ Nov 22 2006, 11:18 PM) Because stated there on the website that it's 4 heatpipes. ???? hahahhaha It state there as 4 Dual Heatpipes la... Not 4 heatpipes... It can be as maybe they're stating that 4 heatpipes on the left and 4 heatpipe on the right... They didn't say 4 heatpipes, they said 4 Dual Heatpipes... |
|
|
Nov 23 2006, 12:23 AM
|
|
Senior Member
1,098 posts Joined: Oct 2004
|
QUOTE(sHawTY @ Nov 22 2006, 11:26 PM) It state there as 4 Dual Heatpipes la... u go google, search reviews about it. 4 dual heatpipes doesn't mean 8 heatpipes.... Not 4 heatpipes... It can be as maybe they're stating that 4 heatpipes on the left and 4 heatpipe on the right... They didn't say 4 heatpipes, they said 4 Dual Heatpipes...  http://www.a1-electronics.net/Heatsinks/20...H-U12_Jan.shtml QUOTE It is not easy to see as in the earlier picture but this NH-U12 has 4 our heat pipes like its small brother NH-U9 cooler. http://www.neoseeker.com/Articles/Hardware.../noctua_NH-U12/ QUOTE The NH-U 12 is an absolute giant that is equipped with a robust cast/machined solid copper base. Clamped and soldered to this base are 4 copper heat pipes, each molded from 1/4" diameter thin walled copper tubing. Wrapped around those copper spires - 38 stamped aluminum cooling fins. This cooler is perfectly industrious in its nature. http://www.driverheaven.net/reviews/noctua/index.htm QUOTE Here's a closer look on the base and the four u-shaped dual heat pipes, they form a total of eight risers that spread the heat throughout the fins. Both the coolers have 38 aluminium fins to dissipate the heat. On the NH-U9 there is a total surface area of 3800cm2 and on the NH-U12 a total of 5000cm2 of heat dissipating goodness. http://www.overclockersonline.net/index.ph...&num=384&pnum=2 QUOTE Both of these heatsinks utilize four U-shaped heatpipes to transfer heat from the base of the heatsink up to the 38 aluminum fins attached to the heatpipes with soldered joints where fans attached with wire clips and anti-vibration strips can dissipate the heat. Like the vast majority of vertical heatsinks, though tall, they leave a relatively small footprint so there should be no compatibility issues with surrounding components. I guess that's enough ? If u need more.. just let me know This post has been edited by neoxz: Nov 23 2006, 12:34 AM |
|
|
Nov 25 2006, 12:18 PM
|
|
Senior Member
1,052 posts Joined: Oct 2006 From: Malaysia
|
QUOTE(neoxz @ Nov 23 2006, 12:23 AM) u go google, search reviews about it. 4 dual heatpipes doesn't mean 8 heatpipes.... why u guys want to argue about that simple think???http://www.a1-electronics.net/Heatsinks/20...H-U12_Jan.shtml http://www.neoseeker.com/Articles/Hardware.../noctua_NH-U12/ http://www.driverheaven.net/reviews/noctua/index.htm http://www.overclockersonline.net/index.ph...&num=384&pnum=2 I guess that's enough ? If u need more.. just let me know whether it 4 heat pipes, or 4 dual heat pipes or 8 heatpipes,the design not change a lot.... the performance also same.only name are different... haiya,u guys make me pening |
|
|
Nov 25 2006, 12:26 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(id86 @ Nov 25 2006, 12:18 PM) why u guys want to argue about that simple think??? Who told you that different number of heatpipes makes the performance same? whether it 4 heat pipes, or 4 dual heat pipes or 8 heatpipes,the design not change a lot.... the performance also same.only name are different... haiya,u guys make me pening The Truth: More heatpipe results to: Higher Performance which means, better heat conduction from the base to the fins... Capiche? |
|
|
Nov 25 2006, 01:32 PM
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
War of heat pipe now days ... last time about copper fin...
put aside how many heat pipe it has other factors also come into consideration .. such as length of pipe, material inside the pipe and how well it bond to the fins...of course design patten of fin also important don't just comparing one factor while there are more to be considered.... This post has been edited by Doom: Nov 25 2006, 01:32 PM |
|
|
Nov 25 2006, 02:12 PM
|
Senior Member
2,865 posts Joined: Jan 2003
|
QUOTE(Doom @ Nov 25 2006, 01:32 PM) War of heat pipe now days ... last time about copper fin... Totally agree with U. Design, construction, built, fan used, mounting method, contact surface, material used and etc all play important part in making a best cooler. Ignoring other factors is a shortsighted view/opinion.put aside how many heat pipe it has other factors also come into consideration .. such as length of pipe, material inside the pipe and how well it bond to the fins...of course design patten of fin also important don't just comparing one factor while there are more to be considered.... Capiche? This post has been edited by mikelanding: Nov 25 2006, 02:13 PM |
|
|
Nov 26 2006, 09:43 AM
|
|
Senior Member
1,052 posts Joined: Oct 2006 From: Malaysia
|
QUOTE(mikelanding @ Nov 25 2006, 02:12 PM) Totally agree with U. Design, construction, built, fan used, mounting method, contact surface, material used and etc all play important part in making a best cooler. Ignoring other factors is a shortsighted view/opinion. Question:Capiche? a)what fin design give more performance? b)what is mean by contact method?can give some example? c)contact surface refer to which part?between the chip and the heat sink or heat sink with the fan? d)from all the factor mention,which type of cooler that had all that factor? |
|
|
Nov 26 2006, 10:22 AM
|
|
Senior Member
1,561 posts Joined: Jan 2003 From: 秋葉原電気街
|
QUOTE(id86 @ Nov 26 2006, 09:43 AM) Question: a)fin design i think he refers to the quantity and the size of the fins liek i mention beforea)what fin design give more performance? b)what is mean by contact method?can give some example? c)contact surface refer to which part?between the chip and the heat sink or heat sink with the fan? d)from all the factor mention,which type of cooler that had all that factor? b)contact method refers to mounting method i guess c)contact surface refers to the contact of the hsf base and the proc and also the contact between the base and the heatpipe and the heatpie with the fans.... they are all interelated some ppl claims that the smoothness of the hsf base also affect the performace.... thats why many ppl lap their hsf |
|
|
Nov 26 2006, 10:31 AM
|
|
Senior Member
1,052 posts Joined: Oct 2006 From: Malaysia
|
QUOTE(sup3rfly @ Nov 26 2006, 10:22 AM) a)fin design i think he refers to the quantity and the size of the fins liek i mention before can you tell me more detail about what just you said except for the fin design(coz u had mentioned it in other thread)?b)contact method refers to mounting method i guess c)contact surface refers to the contact of the hsf base and the proc and also the contact between the base and the heatpipe and the heatpie with the fans.... they are all interelated some ppl claims that the smoothness of the hsf base also affect the performace.... thats why many ppl lap their hsf |
|
|
Nov 26 2006, 10:38 AM
|
|
Senior Member
1,561 posts Joined: Jan 2003 From: 秋葉原電気街
|
QUOTE(id86 @ Nov 26 2006, 10:31 AM) can you tell me more detail about what just you said except for the fin design(coz u had mentioned it in other thread)? hmmm the thinner the hsf base means the faster the heats get transferred from the cpu to the hsf base, if the contact of the heatpipes and the cpu base is very good as that means the heat get transferred to the heatpipe faster then the heatpipe will transfer the heat to the fin and the fin will be cooled down by the fan:)cpu -> the hsf base -> heatpipes -> fins then fins cool down by the fan the smoother of the hsf base means the more contact between the cpu and the base.... hope this explains it |
|
|
Nov 26 2006, 10:43 AM
|
|
Senior Member
1,052 posts Joined: Oct 2006 From: Malaysia
|
QUOTE(sup3rfly @ Nov 26 2006, 10:38 AM) hmmm the thinner the hsf base means the faster the heats get transferred from the cpu to the hsf base, if the contact of the heatpipes and the cpu base is very good as that means the heat get transferred to the heatpipe faster then the heatpipe will transfer the heat to the fin and the fin will be cooled down by the fan:) oh thanx...i know a lot from you cpu -> the hsf base -> heatpipes -> fins then fins cool down by the fan the smoother of the hsf base means the more contact between the cpu and the base.... hope this explains it btw,how many contact method exist?can give me example or link? |
|
|
Nov 26 2006, 11:45 AM
|
|
Senior Member
1,561 posts Joined: Jan 2003 From: 秋葉原電気街
|
QUOTE(id86 @ Nov 26 2006, 10:43 AM) oh thanx...i know a lot from you actually there is no specific contact method.... just the thickness of the hsf base and the connection between the heatpipes and the base btw,how many contact method exist?can give me example or link? i m not quite sure also.... |
|
|
Nov 26 2006, 11:16 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(sup3rfly @ Nov 26 2006, 10:38 AM) hmmm the thinner the hsf base means the faster the heats get transferred from the cpu to the hsf base, if the contact of the heatpipes and the cpu base is very good as that means the heat get transferred to the heatpipe faster then the heatpipe will transfer the heat to the fin and the fin will be cooled down by the fan:) This is what i'm trying to explain here earlier...cpu -> the hsf base -> heatpipes -> fins then fins cool down by the fan the smoother of the hsf base means the more contact between the cpu and the base.... hope this explains it But one guy here, start to smash me up... He's also the guy who's in my Worse Seller list in my successful tradelist... To think that he's the best in everything... |
|
|
Nov 27 2006, 11:29 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
Detail explanation from sup3rfly...
good and solve lots of query regarding how good performance cooler should work.. solve pretty much the war here...... |
|
|
Nov 27 2006, 12:43 PM
|
|
Senior Member
1,052 posts Joined: Oct 2006 From: Malaysia
|
QUOTE(sHawTY @ Nov 26 2006, 11:16 PM) This is what i'm trying to explain here earlier... who you refer to?But one guy here, start to smash me up... He's also the guy who's in my Worse Seller list in my successful tradelist... To think that he's the best in everything... btw, if we lapping the base of the heat sink until become like mirror surface,the heat can be transfer more right?but,can we lapping the processor like that so we can gain more performance? |
|
|
Nov 27 2006, 06:25 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(id86 @ Nov 27 2006, 12:43 PM) who you refer to? No need to say his name here, as you can see it by yourself in my successful tradelist.btw, if we lapping the base of the heat sink until become like mirror surface,the heat can be transfer more right?but,can we lapping the processor like that so we can gain more performance? It is not that if we lap the base to mirror shine that'll make the heat to be transferred better, the real reason for doing lapping is for making the base real flat... There's no use if u lap the heatsink to mirror shine, while the base is not flat at all, this will result to a lesser heat conduction between the processor IHS and the heatsink. |
|
|
Nov 27 2006, 06:43 PM
|
|
Senior Member
1,561 posts Joined: Jan 2003 From: 秋葉原電気街
|
QUOTE(Doom @ Nov 27 2006, 11:29 AM) Detail explanation from sup3rfly... well y must flamming each others la...all of us are learning good and solve lots of query regarding how good performance cooler should work.. solve pretty much the war here...... no one is perfect la |
|
|
Nov 27 2006, 10:27 PM
|
|
Senior Member
1,052 posts Joined: Oct 2006 From: Malaysia
|
QUOTE(sup3rfly @ Nov 27 2006, 06:43 PM) well y must flamming each others la...all of us are learning i agreed.why everybody like to blame someone?no one is perfect la like me,i just want to learn something.thats why i ask. not spamming.... i know i can google it.but is it wrong to ask others opinion.besides,the person also can give some advice base from his or her experiences. sama2 belajar la |
|
|
Nov 27 2006, 10:59 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(id86 @ Nov 27 2006, 10:27 PM) i agreed.why everybody like to blame someone? You can ask questions, no one here says that no one can ask anything here...like me,i just want to learn something.thats why i ask. not spamming.... i know i can google it.but is it wrong to ask others opinion.besides,the person also can give some advice base from his or her experiences. sama2 belajar la You have the right to ask question, but please refrain from asking such simple simple questions here and there with those questions that you you'reself can get the answer by doing just some simple thinking... About blaming, you've misunderstood it... No one is blaming anyone... You've misread it... Capiche? |
|
|
Nov 27 2006, 11:01 PM
|
|
Senior Member
1,052 posts Joined: Oct 2006 From: Malaysia
|
ok...i just want to learn.
sorry with my behave. hope can learn something fromseniors |
|
|
Nov 27 2006, 11:46 PM
|
Senior Member
1,924 posts Joined: Jan 2005 From: Subang Jaya
|
QUOTE(id86 @ Nov 27 2006, 12:43 PM) who you refer to? lapping job will make the base more flat by reducing those microscopic mountain on the heatsink base..btw, if we lapping the base of the heat sink until become like mirror surface,the heat can be transfer more right?but,can we lapping the processor like that so we can gain more performance? there's various method in doing this.. my favourite one is put the sand paper on top of a mirror (which guarantee the flat surface u can possibly have)...then put some air sabun....slide the hsf base on top of it slowly with only it's selfweight grinding through the sand paper confirm clean and clear! "tiada jerawat lagi" |
|
|
Nov 28 2006, 02:08 AM
|
|
Senior Member
1,561 posts Joined: Jan 2003 From: 秋葉原電気街
|
QUOTE(moderno @ Nov 27 2006, 11:46 PM) lapping job will make the base more flat by reducing those microscopic mountain on the heatsink base.. jerawat guna oxy la there's various method in doing this.. my favourite one is put the sand paper on top of a mirror (which guarantee the flat surface u can possibly have)...then put some air sabun....slide the hsf base on top of it slowly with only it's selfweight grinding through the sand paper confirm clean and clear! "tiada jerawat lagi" anyway here is a guide on How to Lap HSF but somehow many ppl say its not good to lap it in "8" shape... |
|
|
Nov 28 2006, 07:12 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
gguys there is one thing that u have to keep in mind... lapping all the way to a perfect mirror finish does not help ur temps in fact it COULD make it worse... the objective is just to get it to be perfectly flat... not mirror... the mirror thing started coz of the bling bling revolution...heres a link that will prove my point...feel free to scroll down to the Do I want a mirror finish part.
http://www.techpowerup.com/articles/cooling/39 |
|
|
Nov 29 2006, 09:14 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(lolhalol @ Nov 28 2006, 07:12 PM) gguys there is one thing that u have to keep in mind... lapping all the way to a perfect mirror finish does not help ur temps in fact it COULD make it worse... the objective is just to get it to be perfectly flat... not mirror... the mirror thing started coz of the bling bling revolution...heres a link that will prove my point...feel free to scroll down to the Do I want a mirror finish part. Thanks for the link man...http://www.techpowerup.com/articles/cooling/39 Now i really have to redo my lapping... My Pentium D 930 oc'ed to 3.75GHz, running at 46celcius... I think i've done lapping in the wrong way... |
|
|
Dec 1 2006, 09:56 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
hohoho... still not satisfied even with ur Xp-120... maybe it's time to go WC!!
|
|
|
Dec 1 2006, 10:01 AM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
@shawty
np man..just spread it around lah, vry cmmon misconception leh, the mirror finish thingi... |
|
|
Dec 1 2006, 10:57 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Doom @ Dec 1 2006, 09:56 AM) hohoho... still not satisfied even with ur Xp-120... maybe it's time to go WC!! I'm not gonna go into WC...Don't even wanna go near there... To much hassle... |
|
|
Dec 2 2006, 02:14 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
totally agree but there is still the temptation exist when looking at those WC rig with decent temperature result ...
|
|
|
Dec 2 2006, 04:27 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Doom @ Dec 2 2006, 02:14 AM) totally agree but there is still the temptation exist when looking at those WC rig with decent temperature result ... True... Looking at those nice nice watercooled rig in the Casing & Modification section, do lure me out for using WC, but the hassle of fixing it turns me down... |
|
|
Dec 3 2006, 07:11 PM
|
Senior Member
740 posts Joined: Jan 2003 From: Langkawi
|
watercooling?ah, not rite now, at least..
the cost is too high for a student like me. |
|
|
Dec 13 2006, 05:35 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
bro after i turned traitor
to aircooling (tr i miss u..), my storm block ios blody amazing (to me... ) under load the max i ever get is 46. thats with 1.86 v on my ultra-d...n all the people saying that wc is a hassle its not really true at all.. actually once u get it running is very reliable ... not much work to do and its easier to clean..u just have to brush teh rad, on a hsf , u have to remove the whole thing... |
|
|
Dec 13 2006, 11:45 PM
|
|
Junior Member
77 posts Joined: Aug 2006
|
does anyone know wat chipset cooler can fit on dfi ultra-2 m2 board? bcos tat board tempreture is damn high.. around 60 celcius plus++...
|
|
|
Dec 17 2006, 01:15 AM
|
|
Junior Member
12 posts Joined: Oct 2006
|
Same here any chipset cooler suggestion for DFI infinity ultra II - m2 mobo ?
at 60 degree need to get a chipset cooler |
|
|
Dec 17 2006, 01:50 AM
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
why not try to look for thermalright HR05?
|
|
|
Dec 17 2006, 10:54 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
QUOTE(coolice @ Aug 22 2006, 10:04 PM) any one know where to get zalman fanless chipset cooler and thermalright hr-05? ALLIT Hypermall there got sell Zalman chipset cooler as well as sri computer..mean while HR-05 can get it at Overclocker paradise...but make sure u bargain gao gao... |
|
|
Dec 17 2006, 03:59 PM
|
VIP
4,809 posts Joined: Jan 2005
|
QUOTE(Doom @ Dec 17 2006, 10:54 AM) ALLIT Hypermall there got sell Zalman chipset cooler as well as sri computer.. sorry la, but if bargain kao kao also dunno wether worth getting or not ><mean while HR-05 can get it at Overclocker paradise...but make sure u bargain gao gao... |
|
|
Dec 17 2006, 06:49 PM
|
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
very true.... their price is abit expensive.. wait for bulk better. hehe
|
|
|
Dec 17 2006, 11:56 PM
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(irangan @ Dec 17 2006, 06:49 PM) very true.... their price is abit expensive.. wait for bulk better. hehe are u gonna handle one... |
|
|
Dec 18 2006, 01:20 AM
|
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
QUOTE(E-J@1 @ Dec 17 2006, 11:56 PM) are u gonna handle one... i think there is ppl doing it right now.. check bulk area. |
|
|
Dec 18 2006, 02:53 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(irangan @ Dec 18 2006, 01:20 AM) i think there is ppl doing it right now.. check bulk area. can't find any, already search for it... nothing came up |
|
|
Dec 18 2006, 05:22 AM
|
|
Senior Member
2,162 posts Joined: Sep 2004
|
elhh82 did the bulk but now close already
. I also planning to get one meanwhile, there's this bulk that we can order from usa stores online http://forum.lowyat.net/topic/383875 maybe u can order from there |
|
|
Dec 18 2006, 08:59 AM
|
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
already close ar... too bad too bad... i thought he got 2nd run of it...
|
|
|
Dec 18 2006, 11:56 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(s[H]sIkuA @ Dec 18 2006, 05:22 AM) elhh82 did the bulk but now close already wah, thanx a lot, didn't notice it . I also planning to get one meanwhile, there's this bulk that we can order from usa stores online http://forum.lowyat.net/topic/383875 maybe u can order from there |
|
|
Dec 18 2006, 05:25 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
It would be better to get the stuff from bulk order .... that's under condition if u are willing to wait ,,,,,
for me the time dont want to wait .. .so just go for it ... i got it for RM110. i did wait for the HR-01 as it is not available locally ... and lucky it took a month long to settle the stuff. |
|
|
Dec 18 2006, 05:38 PM
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
Tried o'c paradise at lyp?? Last time they have..
|
|
|
Dec 18 2006, 05:58 PM
|
|
Junior Member
77 posts Joined: Aug 2006
|
QUOTE(irangan @ Dec 17 2006, 01:50 AM) why not try to look for thermalright HR05? izzit this cooler can fits on dif infinty ultra2-m2 board ? |
|
|
Dec 18 2006, 06:07 PM
|
|
Senior Member
2,162 posts Joined: Sep 2004
|
Ultra2-m2 board is SLI/Crossfire, so might need to get the HR-05-SLI version
http://www.thermalright.com/a_page/main_product_hr05sli.htm |
|
|
Dec 18 2006, 06:10 PM
|
Senior Member
3,102 posts Joined: May 2005 From: Penang *̡͌l̡*̡̡
|
QUOTE(s[H]sIkuA @ Dec 18 2006, 06:07 PM) Ultra2-m2 board is SLI/Crossfire, so might need to get the HR-05-SLI version why you all wanna get so high end chipset cooler??http://www.thermalright.com/a_page/main_product_hr05sli.htm even the evercool also can porform well in most case~ except u are really hard OCer |
|
|
Dec 18 2006, 06:20 PM
|
|
Senior Member
2,162 posts Joined: Sep 2004
|
There's no why, just like when I ask you why u need X2 when a normal A64 is as fast when doing the usual daily task
Furthermore, keeping the system cold and quiet are important these days |
|
|
Dec 18 2006, 10:09 PM
|
|
Junior Member
77 posts Joined: Aug 2006
|
but hr 05 is really big right? will its fits ? cos mayb stuck wit Graphir card....
|
|
|
Dec 18 2006, 11:52 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Jealousy @ Dec 18 2006, 10:09 PM) but hr 05 is really big right? will its fits ? cos mayb stuck wit Graphir card.... That depend on the model of you're motherboard itself liao... Futhermore, HR-05 doesn't come in one style, it comes in two, one is HR-05, and HR-05 SLi |
|
|
Dec 19 2006, 09:21 AM
|
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
HR 05 cant fit my mobo... any suggestion?
OC should have it, i inquire about that few weeks ago. |
|
|
Dec 19 2006, 01:20 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(irangan @ Dec 19 2006, 09:21 AM) HR 05 cant fit my mobo... any suggestion? Hoh?OC should have it, i inquire about that few weeks ago. Why can't fit? Because the HR-05 is too high or what? |
|
|
Dec 19 2006, 02:16 PM
|
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
QUOTE(sHawTY @ Dec 19 2006, 01:20 PM) Hoh? Intel 875PWhy can't fit? Because the HR-05 is too high or what? GA-8KNXP Ultra(Rev 1.x) Not Compatible GA-8KNXP(Rev 1.x) Not Compatible GA-8IK1100(Rev 1.x) Not Compatible GA-8KNXP Ultra(Rev 2.x) Not Compatible GA-8I875 Ultra Not Compatible GA-8I875 Not Compatible GA-8KNXP(Rev 2.x) Not Compatible GA-8IK1100(Rev 2.x) Not Compatible GA-8KNXP Ultra-64 Not Compatible that is from the thermalright website. i also not sure why... |
|
|
Dec 19 2006, 04:56 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Well, before i got the Zalman northbridge cooler last time, i was planning to get this TR HR05 but too bad it wont fit my mobo as well...
|
|
|
Dec 19 2006, 07:16 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
haha sometimes tr say it wont fit but sometimes can.... like the dfi lanparty nfoprce 4 series , al;l say cant exceprt for expert , and later models.... but i could fit in.... just have to use the second gc slot...
|
|
|
Dec 19 2006, 09:49 PM
|
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
HR 05 confirm cannot fit my board. i already sent an email to their technical team and they replied saying that all 8knxp series board cannot fit due to its mounting holes.
|
|
|
Dec 19 2006, 11:00 PM
|
|
Senior Member
660 posts Joined: Apr 2005
|
so have u plan to sell it? mind to sell to me.. heh he
|
|
|
Dec 20 2006, 01:50 PM
|
Senior Member
1,093 posts Joined: Jun 2005
|
well, i am using Abit IC7 Max3, i875p, socket 478 mb
the northbridge chipset recently blur blur liao... sometime spin below 3k, some still ok... so, i am thinking to change the chipset cooler for it. i went thought coolermaster and thermaltake, and found these 2.  http://www.modernopc.com/store/index.php?m...products_id=571  http://www.thermaltake.com/product/Cooler/...34/cl-c0034.asp basically, i use towel casing, which the mb lay vertically, not that effective to use heat pipe. so, i am thinking more to coolermaster... any opinion on them? or recommend me others? |
|
|
Dec 20 2006, 01:51 PM
|
|
Senior Member
1,093 posts Joined: Jun 2005
|
well, i am using Abit IC7 Max3, i875p, socket 478 mb
the northbridge chipset recently blur blur liao... sometime spin below 3k, some still ok... so, i am thinking to change the chipset cooler for it. i went thought coolermaster and thermaltake, and found these 2. http://www.modernopc.com/store/index.php?m...products_id=571 http://www.thermaltake.com/product/Cooler/...34/cl-c0034.asp basically, i use towel casing, which the mb lay vertically, not that effective to use heat pipe. so, i am thinking more to coolermaster... any opinion on them? or recommend me others? |
|
|
Dec 20 2006, 02:12 PM
|
|
Senior Member
660 posts Joined: Apr 2005
|
for me i will take thermaltake.. if can get thermalright HR-03 is more better la.. heh he.. i own coolermaster blue ice II before,... it is very SUX...
|
|
|
Dec 20 2006, 03:15 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(cpteoh @ Dec 20 2006, 01:51 PM) » Click to show Spoiler - click again to hide... « This post has been edited by E-J@1: Dec 20 2006, 03:16 PM |
|
|
Dec 20 2006, 03:16 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Yes, thermalright HR should be very good if its compatible with the mobo.But its on a pricy side at around Rm90++
|
|
|
Dec 20 2006, 03:27 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
yeah, but how many chipset cooler thread wanna open
|
|
|
Dec 20 2006, 04:51 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
hr-03? u sure bro... neway the hr-05 is design for vertical casings , coz they use a wick heat pipe.... so gravity has not much of an effect...
|
|
|
Dec 20 2006, 05:03 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
brother got a chipset thread di ...
|
|
|
Dec 21 2006, 04:54 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
yeap..too much duplicating threads
n if u wana spend lesser jus get a zalman nbf-47 for like 40 bucks its fanless, its cheap n it works perfectly im using one if not wont recommend u |
|
|
Dec 21 2006, 04:57 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
again im replying at cpteoh LOL
wana spend less get the zalman nbf-47 wana spend more get the hr-05 hr-05 is nice but wont fit if u r using big arse cpu cooler which extend till the chipset.. |
|
|
Dec 21 2006, 10:31 AM
|
Junior Member
300 posts Joined: Aug 2006 From: -AMD Inc.-
|
bro.. the TT Extreme Spirit not bad.. i m using it for both my north n south bridge..
the temp drop drastically.. |
|
|
Dec 21 2006, 11:08 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
Go here: http://forum.lowyat.net/topic/329365
And discuss there. There is no need to open a new thread for such silly question when the solution is already infront of you... Mod, please close this thread as it's just another duplicate of an existing topic... |
|
|
Dec 21 2006, 04:30 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
so cpteoh, already bought cooler for ur chipset? what brand? tell us
|
|
|
Dec 21 2006, 08:46 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
ya loh... wheres the mods anyway?
|
|
|
Dec 21 2006, 08:49 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
ya loh..everytime someone say they gona buy a new hsf, they mia wan..lol...too busy playing with the new hardware....lol...neway i would still recomend either the tr hr-05 or the sli version if u want even more flexiblity
|
|
|
Dec 22 2006, 05:13 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
 check this out. now that is what i call a nb hsf..looks good.... |
|
|
Dec 22 2006, 05:15 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(lolhalol @ Dec 22 2006, 05:13 PM) check this out. now that is what i call a nb hsf..looks good.... |
|
|
Dec 22 2006, 05:17 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(lolhalol @ Dec 22 2006, 05:13 PM) check this out. now that is what i call a nb hsf..looks good.... |
|
|
Dec 22 2006, 05:20 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
froma company called antazone... and can use passive or active.... but i thick have to mod a fan onto it....
|
|
|
Dec 22 2006, 05:32 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(lolhalol @ Dec 22 2006, 05:20 PM) froma company called antazone... and can use passive or active.... but i thick have to mod a fan onto it.... Is there any review for both of these nb cooler?looks kinda good but not sure bout the performance..lol..it looks too similar to the Zalman and a Scythe but in Mini size..lol..This post has been edited by akachester: Dec 22 2006, 05:33 PM |
|
|
Dec 22 2006, 05:34 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
ya...cant find lah..actually i found out bout these babies like 5 months ago, then just now when i was cleaning my hdd, i foun d the pics..lol..so i post lah... cant find review...maybe i go buy wan ...anywan want to supporet me?
|
|
|
Dec 22 2006, 05:36 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(lolhalol @ Dec 22 2006, 05:20 PM) froma company called antazone... and can use passive or active.... but i thick have to mod a fan onto it.... ic,  mod a fan for it...seem not easy to mod a fan for the heatsink at the right...dunno where to put the fan later... This post has been edited by Kataro: Dec 22 2006, 05:37 PM |
|
|
Dec 22 2006, 06:56 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
they invented jipties for a reason ok... l;ol....
|
|
|
Dec 22 2006, 09:47 PM
|
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
QUOTE(lolhalol @ Dec 22 2006, 05:34 PM) ya...cant find lah..actually i found out bout these babies like 5 months ago, then just now when i was cleaning my hdd, i foun d the pics..lol..so i post lah... cant find review...maybe i go buy wan ...anywan want to supporet me? I support you... if it works, i will follow you! i looking for a northbridge cooler since HR 5 cant fit hehe... i too poor to test it out, need you the rich fella to test it first. haha.. |
|
|
Dec 23 2006, 05:14 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
lol...waht i mean is $$$ suport leh lol...coz i just bought so many things...like the entire hr-series..so cash habis
|
|
|
Jan 3 2007, 12:35 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
Let's talk about the best northbridge chipset heatsink now...
And from what i see, the best is the Noctua NC-U6 The chipset cooler i'm talking about: Noctua NC-U6 Original Website: http://www.noctua.at/main.php?show=product...cts_id=7&lng=en Picture: This are some of little interesting article if you were to to buy NC-U6... Read it... http://www.overclockersonline.net/index.ph...&num=792&pnum=0 Look Here:  It Pawns HR-05 SLi like so much It wins 5 degress over the HR-05 SLi Some more reviews on NC-U6: 1) http://www.overclockersonline.net/index.ph...&num=792&pnum=0 2) http://www.dragonsteelmods.com/index.php?o...=1350&Itemid=38 3) http://www.bigbruin.com/2006/noctuancu6_1 4) http://www.pro-clockers.com/reviews.php?id=189 This chipset heatsink pawns HR-05 SLi in the ass... If it performs much much better than HR-05 SLi, seriously, no doubt that it will beat the normal HR-05... Guys, seriously, this is the best chipset heatsink ever, and those results that you see in those reviews are done while the NC-U6 is running passive, just imagine what you will get if you fit in one 70MM fan on it... And if you're looking forward to buy it, click here: http://forum.lowyat.net/topic/384508 This post has been edited by sHawTY: Jan 3 2007, 03:05 AM |
|
|
Jan 3 2007, 02:18 AM
|
Senior Member
610 posts Joined: Jun 2006 From: Ampang, Selangor
|
Good find shawty.
Unfortunately for me, i guess that the NC U6 cant fit into my system - DS3 + TBTVX. |
|
|
Jan 3 2007, 03:03 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(vassalle @ Jan 3 2007, 02:18 AM) Good find shawty. Yes, this is the problem faced by some users that uses those heatsinks that the fan uses blow down style such as Bigthyphoon, XP120, G-Power Pro Unfortunately for me, i guess that the NC U6 cant fit into my system - DS3 + TBTVX. Edit, where's doom? I wanna see his reaction after seeing that HR-05 is already beaten by NC-U6 This post has been edited by sHawTY: Jan 3 2007, 07:33 AM |
|
|
Jan 3 2007, 09:07 AM
|
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
QUOTE(sHawTY @ Jan 3 2007, 03:03 AM) Yes, this is the problem faced by some users that uses those heatsinks that the fan uses blow down style such as Bigthyphoon, XP120, G-Power Pro dont forget about my Scythe Andy Samurai Master. cannot NC-U6 too. but i going to purchase it for the future!Edit, where's doom? I wanna see his reaction after seeing that HR-05 is already beaten by NC-U6 |
|
|
Jan 3 2007, 09:20 AM
|
Senior Member
2,095 posts Joined: Oct 2005 From: 2�18' | 102�23'
|
sorry if this question already been asked......
what software we can use to see temp for chipset ?? |
|
|
Jan 3 2007, 09:28 AM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(2uk3y @ Jan 3 2007, 09:20 AM) sorry if this question already been asked...... Speedfan, PC Wizard 2006... what software we can use to see temp for chipset ?? |
|
|
Jan 3 2007, 09:49 AM
|
|
Senior Member
2,095 posts Joined: Oct 2005 From: 2�18' | 102�23'
|
QUOTE(Kataro @ Jan 3 2007, 09:28 AM) Speedfan, PC Wizard 2006... thanks |
|
|
Jan 3 2007, 10:47 AM
|
|
Senior Member
610 posts Joined: Jun 2006 From: Ampang, Selangor
|
QUOTE(sHawTY @ Jan 3 2007, 03:03 AM) Yes, this is the problem faced by some users that uses those heatsinks that the fan uses blow down style such as Bigthyphoon, XP120, G-Power Pro Sorry if this is a bit out of topic - didnt feel like starting a new thread..Edit, where's doom? I wanna see his reaction after seeing that HR-05 is already beaten by NC-U6 what northbridge heatsink fits nicely into a ds3 with thermaltake btvx? Its like pushing 40c at 460 fsb@load and im kinda concerned. will need to get a northbridge heatsink before i plan to run at that speed. |
|
|
Jan 3 2007, 10:49 AM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(2uk3y @ Jan 3 2007, 09:49 AM) thanks You are welcome... |
|
|
Jan 3 2007, 11:17 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(vassalle @ Jan 3 2007, 10:47 AM) Sorry if this is a bit out of topic - didnt feel like starting a new thread.. Since height is a problem for you, then there is only one choice...what northbridge heatsink fits nicely into a ds3 with thermaltake btvx? Its like pushing 40c at 460 fsb@load and im kinda concerned. will need to get a northbridge heatsink before i plan to run at that speed. PCCooler NB-400 CU It's small, it's powerful, and it's much much lower than those tower chipset heatsink... |
|
|
Jan 3 2007, 11:26 AM
|
|
Senior Member
610 posts Joined: Jun 2006 From: Ampang, Selangor
|
QUOTE(sHawTY @ Jan 3 2007, 11:17 AM) Since height is a problem for you, then there is only one choice... Thanks for the suggestion.PCCooler NB-400 CU It's small, it's powerful, and it's much much lower than those tower chipset heatsink... However, either google is broken or this nb heatsink is so scarce that i cant find a picture of it, let alone a review of it on the net. Do point me to the right direction. p/s: i've only found one picture of it in this thread. |
|
|
Jan 3 2007, 11:34 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
or u can try zalman nbf47j..fanless design laa n cheap as well..but works well if ur case hav plenty of airflow
|
|
|
Jan 3 2007, 11:41 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(PowerSlide @ Jan 3 2007, 11:34 AM) or u can try zalman nbf47j..fanless design laa n cheap as well..but works well if ur case hav plenty of airflow zalman also good in terms of value for money, but still can beat TR's or Noctua's |
|
|
Jan 3 2007, 11:44 AM
|
|
Senior Member
610 posts Joined: Jun 2006 From: Ampang, Selangor
|
QUOTE(PowerSlide @ Jan 3 2007, 11:34 AM) or u can try zalman nbf47j..fanless design laa n cheap as well..but works well if ur case hav plenty of airflow Maybe can fit it in.. have to go back and ukur. According to the website, the height is about 4.5 cm. hopefully it could fit in my setup.anyway, just realised that the uglyvamp store is in singapore.. Darn thats far. Where else can i get the pccooler or the zalman nbf47j (moderno's shop is out of stock)? |
|
|
Jan 3 2007, 12:00 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(vassalle @ Jan 3 2007, 11:44 AM) Maybe can fit it in.. have to go back and ukur. According to the website, the height is about 4.5 cm. hopefully it could fit in my setup. yeah, i also want one, can anybody tell me where to get it? anyway, just realised that the uglyvamp store is in singapore.. Darn thats far. Where else can i get the pccooler or the zalman nbf47j (moderno's shop is out of stock)? |
|
|
Jan 3 2007, 01:14 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
The Zalman nb cooler i am pretty much sure you can get it at ALL IT or Sri Comp at LYP.But the one at Sri is price too high at almost RM50 while at ALL IT, its about RM36 IIRC.Anyway, its been almost 2weeks i had not been at LYP so i cant confirm they still have it or not...
This post has been edited by akachester: Jan 3 2007, 01:14 PM |
|
|
Jan 3 2007, 01:40 PM
|
Senior Member
676 posts Joined: Jan 2003 From: Ipoh / Melaka
|
I'm using BTVX + Thermaltake Extreme Spirit... can fit ngam ngam... But both heatsink touching each other...
|
|
|
Jan 3 2007, 02:08 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Anyway, for those who wanted to get the Zalman flower nb cooler, make sure you will have sufficient space for it.My cooler almost clashes with my gc.From what i can see, it will almost definitely fit onto a DFI LP board perfectly without any problem..I might be wrong though..
|
|
|
Jan 3 2007, 02:19 PM
|
|
Senior Member
610 posts Joined: Jun 2006 From: Ampang, Selangor
|
QUOTE(akachester @ Jan 3 2007, 02:08 PM) Anyway, for those who wanted to get the Zalman flower nb cooler, make sure you will have sufficient space for it.My cooler almost clashes with my gc.From what i can see, it will almost definitely fit onto a DFI LP board perfectly without any problem..I might be wrong though.. Guess theres no other way to know whether it could fit or not besides buying it I guess. Just trying my luck, anyone here using the zalman flower nb cooler with 965P DS3? |
|
|
Jan 3 2007, 03:14 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Not really. Maybe you could measure the dimension of the nb cooler with your mobo first before buying it.Front what i can see, it will normally clash with the GC first...
|
|
|
Jan 3 2007, 03:23 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
this zalman only cost 40 bucks leh..hr-05 n noctua one's cost near 100 leh..how to fight
but the 2 cant use if ur cpu or watever blocking which this zalman is small thus more compatible with big arese cooler im using on s478 super power pc LOL n jus fit nicely with xp-120 |
|
|
Jan 3 2007, 03:32 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(vassalle @ Jan 3 2007, 11:44 AM) Maybe can fit it in.. have to go back and ukur. According to the website, the height is about 4.5 cm. hopefully it could fit in my setup. You want it?anyway, just realised that the uglyvamp store is in singapore.. Darn thats far. Where else can i get the pccooler or the zalman nbf47j (moderno's shop is out of stock)? Hehe... Can you see something interesting on my signature? Look properly on my pc spec, something that is bolded in red... This post has been edited by sHawTY: Jan 3 2007, 03:37 PM |
|
|
Jan 3 2007, 03:55 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
Yeah, buy it second hand from sHawTY as he will get his Noctua NB cooler from irangan's bulk...
|
|
|
Jan 3 2007, 04:03 PM
|
|
Senior Member
610 posts Joined: Jun 2006 From: Ampang, Selangor
|
QUOTE(sHawTY @ Jan 3 2007, 03:32 PM) You want it? Cool Cool. PM me your best price Hehe... Can you see something interesting on my signature? Look properly on my pc spec, something that is bolded in red... Anyways, do you have like a before and after temperature reading for teh heatsink? Thankss |
|
|
Jan 3 2007, 04:08 PM
|
|
Junior Member
77 posts Joined: Aug 2006
|
izzzit tat zalman chipset cooler can fit on nf4? my board are dfi infinity ultraII-m2..
|
|
|
Jan 3 2007, 04:30 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(Jealousy @ Jan 3 2007, 04:08 PM) izzzit tat zalman chipset cooler can fit on nf4? my board are dfi infinity ultraII-m2.. Zalman website stated that it will fit on every mobo that has nb cooler that uses pin or clip type.But the main problem would be the size.You will need to make sure whether it would be blocking the CPU HSF or the GC... |
|
|
Jan 3 2007, 04:55 PM
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
thinking to replace my stock nForce4 SLI chipset fan to ThermalRight HR-05 SLI (i'm using DFI LanParty SLI-DR. the thing is, (as PCModdingmy.com's pix) it doesn't show with after market cooling like mine, when i roughly measure, i found, it won't fit into my mobo as, the HR-05 SLI will contact with ThermalTake BigTyphoon Heatpipe
, my Q is, is there any other solution besides thinking to other brand... |
|
|
Jan 3 2007, 05:24 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
not really, but the jinting forcetake should be able to fit.
|
|
|
Jan 3 2007, 08:43 PM
|
Senior Member
1,436 posts Joined: Mar 2005
|
QUOTE(kev_neville @ Jan 3 2007, 01:40 PM) I'm using BTVX + Thermaltake Extreme Spirit... can fit ngam ngam... But both heatsink touching each other... how's the result. tempted to get it as it's not that huge. don't know it fits P5B or not under a BTVX. |
|
|
Jan 3 2007, 10:35 PM
|
|
Senior Member
676 posts Joined: Jan 2003 From: Ipoh / Melaka
|
QUOTE(Sanko @ Jan 3 2007, 08:43 PM) how's the result. tempted to get it as it's not that huge. don't know it fits P5B or not under a BTVX. I get around 40C using speedfan monitoring... Better alot than the stock DS3 heatsink which can reach around 50++ |
|
|
Jan 3 2007, 10:55 PM
|
|
Senior Member
610 posts Joined: Jun 2006 From: Ampang, Selangor
|
Errr... now thats weird.. Im pretty sure the highest i've got under load @ 460fsb @ no aircond room was about 40c, at most 42c on the default ds3..
|
|
|
Jan 4 2007, 07:16 AM
|
|
Senior Member
676 posts Joined: Jan 2003 From: Ipoh / Melaka
|
QUOTE(vassalle @ Jan 3 2007, 10:55 PM) Errr... now thats weird.. Im pretty sure the highest i've got under load @ 460fsb @ no aircond room was about 40c, at most 42c on the default ds3.. U mean ur chipset temperature?? Maybe the envireoment is different from me.. Even my core temperature is 50++ during idle... |
|
|
Jan 4 2007, 08:48 AM
|
|
Senior Member
610 posts Joined: Jun 2006 From: Ampang, Selangor
|
chipset temperature, core temperature, speedfan.. something doesnt sound rite here.. im getting confused meself.
for me, speedfan only shows 'accurately' the chipset temperature. I use TAT to monitor my Core(s) temperature And yes, right now, my chipset temperature is like 40c underload. Probably because i have a 120mm side fan blowing directly to it, and coupled with a low profile graphics card makes the air circulation better i guess. It could go down as low as 30c @idle with the aircond on. |
|
|
Jan 4 2007, 10:43 AM
|
|
Senior Member
676 posts Joined: Jan 2003 From: Ipoh / Melaka
|
QUOTE(vassalle @ Jan 4 2007, 08:48 AM) chipset temperature, core temperature, speedfan.. something doesnt sound rite here.. im getting confused meself. Yup... i also using TAT to monitor core and speedfan to monitor chipset... Wif 120mm fan blowing i'm sure u can reach sub 40C for me, speedfan only shows 'accurately' the chipset temperature. I use TAT to monitor my Core(s) temperature And yes, right now, my chipset temperature is like 40c underload. Probably because i have a 120mm side fan blowing directly to it, and coupled with a low profile graphics card makes the air circulation better i guess. It could go down as low as 30c @idle with the aircond on. |
|
|
Jan 4 2007, 11:08 AM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(vassalle @ Jan 4 2007, 08:48 AM) chipset temperature, core temperature, speedfan.. something doesnt sound rite here.. im getting confused meself. r u sure mobo temp is chipest temp?probably ur mobo temp goes down because u use 120mm fan to blow it..try blower or 40mm fan for jsut blow ur chipset heatsink and see..superfly and me tried last time,no decreasing on mobo temp even we turn on then fanfor me, speedfan only shows 'accurately' the chipset temperature. I use TAT to monitor my Core(s) temperature And yes, right now, my chipset temperature is like 40c underload. Probably because i have a 120mm side fan blowing directly to it, and coupled with a low profile graphics card makes the air circulation better i guess. It could go down as low as 30c @idle with the aircond on. |
|
|
Jan 4 2007, 11:14 AM
|
|
Senior Member
610 posts Joined: Jun 2006 From: Ampang, Selangor
|
QUOTE(coolice @ Jan 4 2007, 11:08 AM) r u sure mobo temp is chipest temp?probably ur mobo temp goes down because u use 120mm fan to blow it..try blower or 40mm fan for jsut blow ur chipset heatsink and see..superfly and me tried last time,no decreasing on mobo temp even we turn on then fan Now i'm more confused. Mobo temp and chipset temp is different meh? Btw, the temperature in easytunes 5 for system is the same temp as reported in speedfan. So I would assume that it would be the chipset temp, no? Will try to switch off the fan later but right now the results might be distorted a bit coz i reapplied AS5 to my northbridge heatsink last nite thinking that 40c was a bit too hot.. Then i saw the other guys post and i feel abit relax |
|
|
Jan 5 2007, 05:03 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
mobo temps is usually totally different from the chipset. how can the mobo tempp be the chipset temp if the mobo is not even prducing alot of heat load? mobo is usually ur case temp. but of course nt every board has these...like dfi lp series, the mobo ttemp is replace by pwm temp, etc....u get the picture?
|
|
|
Jan 5 2007, 05:38 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(lolhalol @ Jan 5 2007, 05:03 PM) mobo temps is usually totally different from the chipset. how can the mobo tempp be the chipset temp if the mobo is not even prducing alot of heat load? mobo is usually ur case temp. but of course nt every board has these...like dfi lp series, the mobo ttemp is replace by pwm temp, etc....u get the picture? In this case, how we can know our chipset temp ler? Let say using speedfan, which temp is chipset temp ler?For my case, I can only see 4 temp, there are temp1, temp2, hd0 & hd1 temp...temp2 is my proc temp, so the temp1 is mobo temp? or chipset temp? |
|
|
Jan 6 2007, 08:59 AM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
easiesdt way is to unplug the chipset fan , then see which temp rises , the one that rises is ur chipset.. just rememn\ber to plyug ur fan back later....
|
|
|
Jan 6 2007, 04:17 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(lolhalol @ Jan 5 2007, 05:03 PM) mobo temps is usually totally different from the chipset. how can the mobo tempp be the chipset temp if the mobo is not even prducing alot of heat load? mobo is usually ur case temp. but of course nt every board has these...like dfi lp series, the mobo ttemp is replace by pwm temp, etc....u get the picture? yup, u rite, mobo temp is ur case temp, but again not all mobo has this, usually it's located near ur ram slot, cause ur a lot of heat will accumulate there, that's why top exhaust fan are important to take out the heat...i read this somewhere but can't remember it |
|
|
Jan 18 2007, 07:40 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
Guys, whoever bought that Noctua NC-U6 from irangan won't be dissapointed with the performance of that chipset heatsink even if it's fixed in passive cooling.
I myself before this is using PC-Cooler NB-400CU with a superfast 40MM fan... This is my result: PC-Cooler NB-400CU with a superfast 40MM fan - 35degrees Noctua NC-U6 passive cooling [no fan attached] - 36degrees Look at the temp man!!!  That NC-U6 is able to cool my Intel 975X chipset to 36degrees even if it's running on passive cooling!!! While the PC-Cooler NB-400CU is fixed with a superfast 40mm fan, but only got 35degrees Just imagine what will i get if later i put a 70mm medium speed fan on that NC-U6, seriously, i have no doubt that the Noctua NC-U6 can cool my Intel 975X chipset to 28-30 degrees without a problem... Now, what are you waiting for, go get you'reself you're own Noctua NC-U6!!! I believe that the NC-U6 is much much better than the Thermalright HR-05 @ HR-05 SLi |
|
|
Jan 18 2007, 08:34 PM
|
|
VIP
4,809 posts Joined: Jan 2005
|
QUOTE(sHawTY @ Jan 18 2007, 07:40 PM) Guys, whoever bought that Noctua NC-U6 from irangan won't be dissapointed with the performance of that chipset heatsink even if it's fixed in passive cooling. judging by its physical state, there is no doubt that it can beat TR's HR-05 hands down.I myself before this is using PC-Cooler NB-400CU with a superfast 40MM fan... This is my result: PC-Cooler NB-400CU with a superfast 40MM fan - 35degrees Noctua NC-U6 passive cooling [no fan attached] - 36degrees Look at the temp man!!! That NC-U6 is able to cool my Intel 975X chipset to 36degrees even if it's running on passive cooling!!! While the PC-Cooler NB-400CU is fixed with a superfast 40mm fan, but only got 35degrees Just imagine what will i get if later i put a 70mm medium speed fan on that NC-U6, seriously, i have no doubt that the Noctua NC-U6 can cool my Intel 975X chipset to 28-30 degrees without a problem... Now, what are you waiting for, go get you'reself you're own Noctua NC-U6!!! I believe that the NC-U6 is much much better than the Thermalright HR-05 @ HR-05 SLi its good to see there is such a good product around, and could u show us some results with a fan put on |
|
|
Jan 18 2007, 09:17 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(DaRkSyThE @ Jan 18 2007, 08:34 PM) judging by its physical state, there is no doubt that it can beat TR's HR-05 hands down. Yeah, i want too, but it's not that easy to find a 70mm fan, i'm looking for a silent 70mm fan...its good to see there is such a good product around, and could u show us some results with a fan put on All those fan seller in here only sells 60mm fans... |
|
|
Jan 18 2007, 09:21 PM
|
Senior Member
1,464 posts Joined: Dec 2004
|
QUOTE(sHawTY @ Jan 18 2007, 07:40 PM) Guys, whoever bought that Noctua NC-U6 from irangan won't be dissapointed with the performance of that chipset heatsink even if it's fixed in passive cooling. very seldom see sellers say other products better than their items.......I myself before this is using PC-Cooler NB-400CU with a superfast 40MM fan... This is my result: PC-Cooler NB-400CU with a superfast 40MM fan - 35degrees Noctua NC-U6 passive cooling [no fan attached] - 36degrees Look at the temp man!!! That NC-U6 is able to cool my Intel 975X chipset to 36degrees even if it's running on passive cooling!!! While the PC-Cooler NB-400CU is fixed with a superfast 40mm fan, but only got 35degrees Just imagine what will i get if later i put a 70mm medium speed fan on that NC-U6, seriously, i have no doubt that the Noctua NC-U6 can cool my Intel 975X chipset to 28-30 degrees without a problem... Now, what are you waiting for, go get you'reself you're own Noctua NC-U6!!! I believe that the NC-U6 is much much better than the Thermalright HR-05 @ HR-05 SLi |
|
|
Jan 18 2007, 09:23 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(deric88 @ Jan 18 2007, 09:21 PM) very seldom see sellers say other products better than their items....... Yes, because i'm an honest man, i hate liersI don't wanna lie, so i tell the truth lor... Seriously, the Noctua NC-U6 is much much better than Thermalright HR-05 This post has been edited by sHawTY: Jan 18 2007, 09:28 PM |
|
|
Jan 18 2007, 10:13 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(sHawTY @ Jan 18 2007, 09:23 PM) Yes, because i'm an honest man, i hate liers yup, those Noctua really better than Thermalright, but Thermalright have their HR SLI advantage for those who have clearance issue I don't wanna lie, so i tell the truth lor... Seriously, the Noctua NC-U6 is much much better than Thermalright HR-05 |
|
|
Jan 18 2007, 11:32 PM
|
All Stars
13,191 posts Joined: Jul 2006
|
QUOTE(sHawTY @ Jan 18 2007, 09:17 PM) Yeah, i want too, but it's not that easy to find a 70mm fan, i'm looking for a silent 70mm fan... for your information , 70mm fan = AMD stock fan (get a 2nd hand one)All those fan seller in here only sells 60mm fans... it's everywhere |
|
|
Jan 18 2007, 11:43 PM
|
Junior Member
236 posts Joined: Jan 2003
|
QUOTE(E-J@1 @ Jan 18 2007, 10:13 PM) yup, those Noctua really better than Thermalright, but Thermalright have their HR SLI advantage for those who have clearance issue ya i am also considering to get a noctua but worry if wanna SLIhope nocua will launch a SLI version |
|
|
Jan 19 2007, 12:09 AM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(skydna @ Jan 18 2007, 11:43 PM) ya i am also considering to get a noctua but worry if wanna SLI errr, if Noctua do make an SLI version for their chipset heatsink, i think they have to make like Thermalright lor, 2 heatpipe only hope nocua will launch a SLI version  This post has been edited by E-J@1: Jan 19 2007, 12:10 AM |
|
|
Jan 19 2007, 01:12 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(E-J@1 @ Jan 19 2007, 12:09 AM) errr, if Noctua do make an SLI version for their chipset heatsink, i think they have to make like Thermalright lor, 2 heatpipe only Not really...They can still do what they did like the NC-U6 2 Dual heatpipes that resolves to 4 heatpipes... But the heatsink base is going to be a lil' bit bigger la... Seriously, i'm really satisfied with my NC-U6 Wait, where's the other buyer for the NC-U6? Not going to give any comments about the superb chipset heatsink? Come here lo, give us you're opinion... |
|
|
Jan 19 2007, 09:00 AM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
man..still the best ever is the hr-05/sli.... i still use it no matter wat..and best of all its compatible to almost any mobo.
|
|
|
Jan 19 2007, 11:09 AM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
Wanna ask something. NB temp and mobo temp is different right? Speedfan only show my proc temp, mobo temp and hdd temp, no NB temp...is there other software that can show chipset temp...?
I am using Via chipset...Please help. I wanna to know my NB temp before and after installing the Noctua NC-U6... |
|
|
Jan 19 2007, 01:15 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
if speed fan cant detect then there might not be a sensor there for tep of nb. neway i was just at lowyat, and u know wat i spent 39 bucks on a zalman chipset hsf... will do a full reiew, and compare to hr-05 very very soon
|
|
|
Jan 19 2007, 02:04 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(lolhalol @ Jan 19 2007, 01:15 PM) if speed fan cant detect then there might not be a sensor there for tep of nb. neway i was just at lowyat, and u know wat i spent 39 bucks on a zalman chipset hsf... will do a full reiew, and compare to hr-05 very very soon if like that maybe I need to study the mobo manual again to see whether it got sensor for the NB... Wow...so many reviews you wanna do...maybe next time those manufacturer will just give you free set to do review... |
|
|
Jan 19 2007, 02:15 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(Kataro @ Jan 19 2007, 02:04 PM) if like that maybe I need to study the mobo manual again to see whether it got sensor for the NB... hopefully, anyway wanna ask, does some mobo really doesn't have those chipset temp monitor, what i mean is that, my mobo got the default application for reading temp, but only for proc, does this mean that it got no nb temp, or if i install those third party, i will display the temp, cause all i know if that the mobo's application doesn't display any nb temp, that means no temp reader for chipset, correct me if i'm wrong Wow...so many reviews you wanna do...maybe next time those manufacturer will just give you free set to do review... |
|
|
Jan 19 2007, 02:20 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
wah that was confusing but ok... try speed fan.... if it detects ur temps, then it is fine, but if speed fan cant detect there is not many softwares out there that will support you....
|
|
|
Jan 19 2007, 03:48 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(lolhalol @ Jan 19 2007, 02:20 PM) wah that was confusing but ok... try speed fan.... if it detects ur temps, then it is fine, but if speed fan cant detect there is not many softwares out there that will support you.... confused i just wanna know if the default application provided in the cd driver does not have nb temp reader, only have proc temp, will installing the speed fan solve it will this speedfan work on an old mobo This post has been edited by E-J@1: Jan 19 2007, 03:50 PM |
|
|
Jan 19 2007, 03:52 PM
|
|
Senior Member
610 posts Joined: Jun 2006 From: Ampang, Selangor
|
im still confused.. maybe becoz of the rainy friday afternoon..
im using ds3. in easytunes, theres a motherboard temperature which usually hovers between 30c - 40c depending on load and ambient temperature. In speedfan reports exactly the same temperature as temp1. Am i to assume that as my northbridge temperature? |
|
|
Jan 19 2007, 04:21 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(vassalle @ Jan 19 2007, 03:52 PM) im still confused.. maybe becoz of the rainy friday afternoon.. easy liao im using ds3. in easytunes, theres a motherboard temperature which usually hovers between 30c - 40c depending on load and ambient temperature. In speedfan reports exactly the same temperature as temp1. Am i to assume that as my northbridge temperature? just unplug ur nb heatsink, then let ur system full load it, see both temp reader, if it increase, then that a nb temp reader |
|
|
Jan 19 2007, 04:24 PM
|
|
Senior Member
610 posts Joined: Jun 2006 From: Ampang, Selangor
|
hahaha.. i'll do that at last resort I guess.. want to open my northbridge heatsink need to unmount my mobo
Hopefully someone using the same mobo can confirm with me. Thanks. |
|
|
Jan 19 2007, 04:41 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
i have done a small tests between the 3 nb cooler i owned,Zalman NBF47,PcCooler NB-400CU and Noctua NC-U6,suprisingly PcCooler win in this roundup,weird is my result diff with shawty's,noctua suppose to outperform PcCooler
noctua idle 46.5c load 51.7c zalman idle 48.5c load 55.6cc pccooler idle 46.2c load 49.0c ambient 32c-34c all cooler blowing with 1 50mm*50mm*10mm fan fan spec 12vdc 0.14A 1.68W 5000rpm 11.37cfm Rig spec E6400 + Asus P5B-E Overclock and voltage setting   addon:noctua mounting clip is scary..need lotsa pressure to hook it noctua stated 29 alu cooling fins but mine only got 28 This post has been edited by coolice: Jan 19 2007, 04:43 PM |
|
|
Jan 19 2007, 05:29 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(coolice @ Jan 19 2007, 04:41 PM) i have done a small tests between the 3 nb cooler i owned,Zalman NBF47,PcCooler NB-400CU and Noctua NC-U6,suprisingly PcCooler win in this roundup,weird is my result diff with shawty's,noctua suppose to outperform PcCooler Bro, have you fixed any fan on the Noctua NC-U6? noctua idle 46.5c load 51.7c zalman idle 48.5c load 55.6cc pccooler idle 46.2c load 49.0c addon:noctua mounting clip is scary..need lotsa pressure to hook it noctua stated 29 alu cooling fins but mine only got 28 If not, then, you see that the PC-Cooler NB-400 CU fixed with a 40MM fan right? So, the PC-Cooler NB-400 CU needs a fan to cool it out, to 46.2 degrees while the NC-U6 is able to cool you're chipset to 46.5 degrees without a fan attached to it... If my assumptions is right, then clearly that the NC-U6 is the winner loo... I'm still searching for the right fan to fit on the NC-U6... And i believe after i put a fan on the NC-U6, then the NC-U6 is able to cool down my chipset more... About the mounting pressure, yes, it is a bit scary, so hard to push, but that's a great thing too, as this will put a good pressure to the chipset, leaving no free way for the NC-U6 to move around. Another thing about the fins, i've just calculated the amount of fins, yes, only 28fins is on my NC-U6 too!!! Damn, why does noctua states that there is 29fins? |
|
|
Jan 19 2007, 06:13 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(sHawTY @ Jan 19 2007, 05:29 PM) Bro, have you fixed any fan on the Noctua NC-U6? all cooler blowing with 1 50mm*50mm*10mm fan If not, then, you see that the PC-Cooler NB-400 CU fixed with a 40MM fan right? So, the PC-Cooler NB-400 CU needs a fan to cool it out, to 46.2 degrees while the NC-U6 is able to cool you're chipset to 46.5 degrees without a fan attached to it... If my assumptions is right, then clearly that the NC-U6 is the winner loo... I'm still searching for the right fan to fit on the NC-U6... And i believe after i put a fan on the NC-U6, then the NC-U6 is able to cool down my chipset more... About the mounting pressure, yes, it is a bit scary, so hard to push, but that's a great thing too, as this will put a good pressure to the chipset, leaving no free way for the NC-U6 to move around. Another thing about the fins, i've just calculated the amount of fins, yes, only 28fins is on my NC-U6 too!!! Damn, why does noctua states that there is 29fins? need someone else to post the result pls |
|
|
Jan 19 2007, 08:07 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
I will post my after I install it on Sunday...tomorrow still need to work untill 6 pm...then still need to go out to eat with my friends...
got no time...btw...the cooler will get tomorrow as irangan just pos it today... I just read my mobo manual...on the hardware monitor, only got CPU Temp Sensing and Chassis temp sensing...mean no NB temp sensing...  how I going to measure it ler... |
|
|
Jan 19 2007, 08:53 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(Kataro @ Jan 19 2007, 08:07 PM) I will post my after I install it on Sunday...tomorrow still need to work untill 6 pm...then still need to go out to eat with my friends... no need to measure the temp one, it will not overheat punye, don't worry, i pretty sure it will perform it's best... got no time...btw...the cooler will get tomorrow as irangan just pos it today... I just read my mobo manual...on the hardware monitor, only got CPU Temp Sensing and Chassis temp sensing...mean no NB temp sensing... how I going to measure it ler... unless u doing a review for it |
|
|
Jan 19 2007, 09:38 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(coolice @ Jan 19 2007, 06:13 PM) all cooler blowing with 1 50mm*50mm*10mm fan Now that's weird... need someone else to post the result pls My NC-U6 works better than the NB-400CU even when the NC-U6 is run in passive mode... |
|
|
Jan 19 2007, 10:27 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(sHawTY @ Jan 19 2007, 09:38 PM) Now that's weird... did u oc ur rig?if yes,can state the setting and voltage also? My NC-U6 works better than the NB-400CU even when the NC-U6 is run in passive mode... |
|
|
Jan 19 2007, 11:38 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(coolice @ Jan 19 2007, 10:27 PM) did u oc ur rig?if yes,can state the setting and voltage also? Yes!!!Pentium D 930 [Super hot!!!] overclocked to 3.75GHz, but the vcore i don't touch woo, tried 4GHz also stable with stock voltage... But still, i don't think by adjusting voltages will affect the differences in heatsink performances right? This post has been edited by sHawTY: Jan 19 2007, 11:40 PM |
|
|
Jan 19 2007, 11:56 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(sHawTY @ Jan 19 2007, 11:38 PM) Yes!!! voltage for NB does Pentium D 930 [Super hot!!!] overclocked to 3.75GHz, but the vcore i don't touch woo, tried 4GHz also stable with stock voltage... But still, i don't think by adjusting voltages will affect the differences in heatsink performances right? |
|
|
Jan 20 2007, 12:20 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(coolice @ Jan 19 2007, 11:56 PM) voltage for NB does No, what i mean is, does adjusting voltages affects even if u're using different chipset heatsinks?Ok, i'm using the same northbridge voltage for each heatsink, and what i found is, the NC-U6 can cool my northbridge better than the NB-400CU... It's the same voltage, so what's the difference there? |
|
|
Jan 20 2007, 01:25 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(E-J@1 @ Jan 19 2007, 08:53 PM) no need to measure the temp one, it will not overheat punye, don't worry, i pretty sure it will perform it's best... ic...but then I can't know whether NC-U6 will cool down how many C than my stock NB cooler lor...sigh... unless u doing a review for it |
|
|
Jan 20 2007, 10:48 PM
|
|
VIP
4,809 posts Joined: Jan 2005
|
QUOTE(Kataro @ Jan 20 2007, 01:25 PM) ic...but then I can't know whether NC-U6 will cool down how many C than my stock NB cooler lor...sigh... safely, i would say u will cut off 10degrees or maybe even more with a fan.last time when i replaced my thermal paste only, the temps dropped by 5 degrees |
|
|
Jan 21 2007, 12:40 AM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(DaRkSyThE @ Jan 20 2007, 10:48 PM) safely, i would say u will cut off 10degrees or maybe even more with a fan. I know I can get around that drop in temp...just I can't give the result as I promised before... last time when i replaced my thermal paste only, the temps dropped by 5 degrees |
|
|
Jan 21 2007, 11:56 AM
|
Junior Member
43 posts Joined: Dec 2006 From: puchong
|
this is the temperture that i got after running orthos for + 6hour, cpu cooler + chipset cooler from irangan bulk, push + pull configuration for the cpu cooler and amd oem 70mm fan for the chipset[attachmentid=183993][attachmentid=183993] 
This post has been edited by zuhair: Jan 21 2007, 12:14 PM |
|
|
Jan 21 2007, 12:33 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
nice but wouldn't it better to have the CPU heat sinl to be configured with push rather than pull air ???
|
|
|
Jan 21 2007, 12:36 PM
|
|
Junior Member
43 posts Joined: Dec 2006 From: puchong
|
it's a push and pull configuration, i'm using the noctua fan to push the air, thermaltake fan with manual control to pull the air and then the chassis fan (silverstone 32mm fan); manually controlled as a third puller. take a look at the picture. the cpu and chipset cooler are both noctua. thank god that the noctua chipset cooler can be rotated because if not the graphic card will be a problem
This post has been edited by zuhair: Jan 21 2007, 12:41 PM |
|
|
Jan 21 2007, 07:34 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
Something really weird happens today...
Today, i just bought at Vantec Aeroflow TMD [Tip Megnatic Drive] 70mm fan. And i fixed it on my Noctua NC-U6... You guys wanna know what i got after fixing the fan on the Noctua NC-U6 on the chipset? I've got 45degrees!!! What the hell? I thought by fixing a fan on the NC-U6, the chipset will be cooler than using the NC-U6 on passive mode... Then, i turn off the fan, and the temps drops a lot man!!! It goes back to 32degrees!!! Hmm... Weird... Does this means that the Noctua NC-U6 can only work on passive mode? Does it means that it is not advisable to use a fan on the NC-U6 Coolice, try take out the fan that you've fixed on you're own NC-U6, then look at the temperature, does the temperature drops? Weird... Anyone else that uses NC-U6, try fit either a 70mm @ 60mm fan on the NC-U6, and take a look at the temperatures, do you experience the same thing as i do? Weird liao... Can anyone explain why? |
|
|
Jan 21 2007, 07:42 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(sHawTY @ Jan 21 2007, 07:34 PM) Something really weird happens today... 13C increase after fixing a fan? Today, i just bought at Vantec Aeroflow TMD [Tip Megnatic Drive] 70mm fan. And i fixed it on my Noctua NC-U6... You guys wanna know what i got after fixing the fan on the Noctua NC-U6 on the chipset? I've got 45degrees!!! What the hell? I thought by fixing a fan on the NC-U6, the chipset will be cooler than using the NC-U6 on passive mode... Then, i turn off the fan, and the temps drops a lot man!!! It goes back to 32degrees!!! Hmm... Weird... Does this means that the Noctua NC-U6 can only work on passive mode? Does it means that it is not advisable to use a fan on the NC-U6 Coolice, try take out the fan that you've fixed on you're own NC-U6, then look at the temperature, does the temperature drops? Weird... Anyone else that uses NC-U6, try fit either a 70mm @ 60mm fan on the NC-U6, and take a look at the temperatures, do you experience the same thing as i do? Weird liao... Can anyone explain why? I still waiting for the cooler to come...last saturday holiday, posman can't send to me... after I get also cannot tell whether got drop in temp or not coz my mobo can't give NB temp... Edit typo... This post has been edited by Kataro: Jan 21 2007, 07:51 PM |
|
|
Jan 21 2007, 09:11 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(sHawTY @ Jan 21 2007, 07:34 PM) Something really weird happens today... u fix the board in case now?i tried but with fan on decreased 2c only Today, i just bought at Vantec Aeroflow TMD [Tip Megnatic Drive] 70mm fan. And i fixed it on my Noctua NC-U6... You guys wanna know what i got after fixing the fan on the Noctua NC-U6 on the chipset? I've got 45degrees!!! What the hell? I thought by fixing a fan on the NC-U6, the chipset will be cooler than using the NC-U6 on passive mode... Then, i turn off the fan, and the temps drops a lot man!!! It goes back to 32degrees!!! Hmm... Weird... Does this means that the Noctua NC-U6 can only work on passive mode? Does it means that it is not advisable to use a fan on the NC-U6 Coolice, try take out the fan that you've fixed on you're own NC-U6, then look at the temperature, does the temperature drops? Weird... Anyone else that uses NC-U6, try fit either a 70mm @ 60mm fan on the NC-U6, and take a look at the temperatures, do you experience the same thing as i do? Weird liao... Can anyone explain why? possible the air blowing by TMD is interfere with ur case flow? or noctua is design for low speed fan? |
|
|
Jan 21 2007, 09:29 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(coolice @ Jan 21 2007, 09:11 PM) u fix the board in case now?i tried but with fan on decreased 2c only Yes, the motherboard is in my casing...possible the air blowing by TMD is interfere with ur case flow? or noctua is design for low speed fan? You mean, while the fan is on, the temps decreased 2 degrees only? Or while the fan is off the temps decreased 2 degrees? Don't understand About the the air blowing is interfere with my case air flow, i'm not really sure bout that, but, will it affect the temps of my chipset? Sorry, newbie about air flow here... About noctua is designed for low speed fan, i thought about the same thing too, maybe the design are just the same with scythe ninja, who knows... But still, it's giving me a headache... |
|
|
Jan 21 2007, 09:39 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
My NB is DAMN hot to when o'c to 3.6Ghz. Cant even accidently touch it.. hot like an iron.
BTW, sHwTY u suing wc rite?? can it cool the NB?? Izzit better than Noctua NB cooler?? |
|
|
Jan 21 2007, 10:08 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(yehlai @ Jan 21 2007, 09:39 PM) My NB is DAMN hot to when o'c to 3.6Ghz. Cant even accidently touch it.. hot like an iron. No, my watercooling system doesn't come with NB waterblock liao... BTW, sHwTY u suing wc rite?? can it cool the NB?? Izzit better than Noctua NB cooler?? |
|
|
Jan 21 2007, 10:09 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(sHawTY @ Jan 21 2007, 09:29 PM) Yes, the motherboard is in my casing... with fan on only drop 2c You mean, while the fan is on, the temps decreased 2 degrees only? Or while the fan is off the temps decreased 2 degrees? Don't understand About the the air blowing is interfere with my case air flow, i'm not really sure bout that, but, will it affect the temps of my chipset? Sorry, newbie about air flow here... About noctua is designed for low speed fan, i thought about the same thing too, maybe the design are just the same with scythe ninja, who knows... But still, it's giving me a headache... mind to how u fit the noctua and the fan blowing toward which way..better if got pic |
|
|
Jan 21 2007, 10:12 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(coolice @ Jan 21 2007, 10:09 PM) with fan on only drop 2c The noctua is fitting facing the 8800GTS card, and the fan is blowing directly to the card... mind to how u fit the noctua and the fan blowing toward which way..better if got pic I don't think it's sucking hot air from somewhere else... |
|
|
Jan 21 2007, 10:17 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(sHawTY @ Jan 21 2007, 10:12 PM) The noctua is fitting facing the 8800GTS card, and the fan is blowing directly to the card... haha..mine is vice versa..sucking air from back of graphic card and blow toward proc I don't think it's sucking hot air from somewhere else... have u try lower speed with TMD on noctua?5v or 7v perhaps |
|
|
Jan 21 2007, 10:31 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(sHawTY @ Jan 21 2007, 10:12 PM) The noctua is fitting facing the 8800GTS card, and the fan is blowing directly to the card... Maybe after it blow the hot air to the 8800GTS , the hot air tendang balik from the 8800GTS to the NC-06?... I don't think it's sucking hot air from somewhere else... |
|
|
Jan 21 2007, 10:36 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(coolice @ Jan 21 2007, 10:17 PM) haha..mine is vice versa..sucking air from back of graphic card and blow toward proc Tried, it's running at lowest speed [set in bios] have u try lower speed with TMD on noctua?5v or 7v perhaps It's full speed is 6000RPm, and when i set it to run at lowest speed, it is set to run at 3000RPm... Full speed or lowest speed, it's just the same, no improvement at all... When i turn on the fan, i can see that the chipset heatsink fins is cool, but not the northbridge itself, the heatsink cools down, but the northbridge temps rises up... QUOTE(Kataro @ Jan 21 2007, 10:31 PM) Maybe after it blow the hot air to the 8800GTS , the hot air tendang balik from the 8800GTS to the NC-06?... Don't think so, as the NC-U6 is kinda far from the graphic card.It's too far to let the hot air to be rounded up back to the fan back again. |
|
|
Jan 22 2007, 08:21 PM
|
Store Representative
679 posts Joined: Jan 2003 From: PG/KL/CYBERJAYA
|
QUOTE(sHawTY @ Jan 21 2007, 09:29 PM) Yes, the motherboard is in my casing... base on ur statement.You mean, while the fan is on, the temps decreased 2 degrees only? Or while the fan is off the temps decreased 2 degrees? Don't understand About the the air blowing is interfere with my case air flow, i'm not really sure bout that, but, will it affect the temps of my chipset? Sorry, newbie about air flow here... About noctua is designed for low speed fan, i thought about the same thing too, maybe the design are just the same with scythe ninja, who knows... But still, it's giving me a headache... i hv to make 2 guess... 1st of all, due to heavy vibration, it affect the contact make between chipset and heatsink. 2nd, the airflow inside the casing is disturb by the fan u tide with heatsink. so, u might need to change ur fan blowing direction, inorder to improve ur whole system temperature to more cooler... |
|
|
Jan 24 2007, 06:27 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
Lol using Noctua seems to get lousier temperature than my stock gigabyte HS with a small fan attached, i am getting load temperature of 51c while i can get around 47-48cwith the gigabyte stock HS
|
|
|
Jan 24 2007, 07:00 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
wah, so many ppl having problem with noctua
|
|
|
Jan 24 2007, 07:09 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(Bliz @ Jan 24 2007, 06:27 PM) Lol using Noctua seems to get lousier temperature than my stock gigabyte HS with a small fan attached, i am getting load temperature of 51c while i can get around 47-48cwith the gigabyte stock HS Bro, try using it without fan. |
|
|
Jan 24 2007, 09:14 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(sHawTY @ Jan 24 2007, 07:09 PM) Bro, try using it without fan. The problem is i am using it without attaching any fan |
|
|
Jan 24 2007, 09:38 PM
|
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
SORRY... DOUBLE POSTING
This post has been edited by irangan: Jan 24 2007, 09:40 PM |
|
|
Jan 24 2007, 09:40 PM
|
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
QUOTE(Bliz @ Jan 24 2007, 09:14 PM) The problem is i am using it without attaching any fan err... the performance so bad ar.... |
|
|
Jan 24 2007, 10:03 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(irangan @ Jan 24 2007, 09:40 PM) err... the performance so bad ar.... Maybe i installed it wrongly lol, but from what i have read the performance should be much better than stock cooler |
|
|
Jan 24 2007, 11:30 PM
|
|
Senior Member
2,162 posts Joined: Sep 2004
|
Holy lol, i still havent install mine, plan to lap my ninja + install together this saturday
Hope it turn out to be okay |
|
|
Jan 27 2007, 04:30 PM
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
which chipset cooler is cool enuf for my ds3? Currently using big typhoon vx, dunno which can install into the mobo without conflict with big typhoon..
|
|
|
Jan 27 2007, 05:32 PM
|
|
VIP
4,809 posts Joined: Jan 2005
|
QUOTE(ben3003 @ Jan 27 2007, 04:30 PM) which chipset cooler is cool enuf for my ds3? Currently using big typhoon vx, dunno which can install into the mobo without conflict with big typhoon.. HR o5 or the noctua would be ideal. im not too sure whether they can fit though |
|
|
Jan 27 2007, 05:42 PM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
i dont think they can fit in becos currently, the chipset is below the big typhoon vx, unless the the chipset cooler can twist around, if not i don think it is possible...
|
|
|
Jan 27 2007, 05:46 PM
|
|
Senior Member
2,734 posts Joined: Jan 2003 From: Melaka
|
QUOTE(ben3003 @ Jan 27 2007, 05:42 PM) i dont think they can fit in becos currently, the chipset is below the big typhoon vx, unless the the chipset cooler can twist around, if not i don think it is possible... Check the height of the cpu cooler and the height of the Noctua then u can know whether can fit or not, mine fitting without a problem. Using Scythe Ninja+Noctua NC-U6 |
|
|
Jan 27 2007, 06:34 PM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
becos scythe ninja is tower, typhoon is facing downward, meaning the thing will be wider, so covered the whole thing and the noctua also high.. now got only 3-4cm clearance..
|
|
|
Feb 7 2007, 03:30 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
|
|
|
Feb 7 2007, 11:47 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
this look heavy and expensive with massive copper ....
i wonder can fit fans on it or not .. since copper does not dissipate heat well without enough air flow... |
|
|
Feb 7 2007, 11:54 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
weight 270g n cost something like $17.99..not blood sucking
i would buy one if somebody bulk it n there is always way to hook a fan to it |
|
|
Feb 7 2007, 12:39 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(PowerSlide @ Feb 7 2007, 11:54 AM) weight 270g n cost something like $17.99..not blood sucking It's price seem ok but I wonder how it's performance...can beat Noctua NC-U6? just wonder... i would buy one if somebody bulk it n there is always way to hook a fan to it seem hard to find any review for this NB cooler...anyone find one? This post has been edited by Kataro: Feb 7 2007, 01:33 PM |
|
|
Feb 7 2007, 12:58 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(ben3003 @ Jan 27 2007, 04:30 PM) which chipset cooler is cool enuf for my ds3? Currently using big typhoon vx, dunno which can install into the mobo without conflict with big typhoon.. Cheap and good. Zalman NBFj47. Rm38 only. pawn HR-05Edit: But out of stock alrdy.. i also looking for it. This post has been edited by yehlai: Feb 7 2007, 12:58 PM |
|
|
Feb 7 2007, 03:35 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
no way.... the hr-05 is still king. iit can whoop the nbfj47 to death heat pipe versus no heat pipe... hu u think will win... and the hr-05 can put fan if u want... flexibility...
|
|
|
Feb 7 2007, 10:03 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
HR 05 is good but not cheap.
Wht i saw from Madshrimps is Zalman NB47 is highly recomended and its cheap. http://www.madshrimps.be/?action=getarticl...980&articID=473 |
|
|
Feb 7 2007, 10:06 PM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
which one would be the best depend on whether u really have the hot mobo to test it out .... some review site may not push the chip to the hottest level..
this may generate inaccurate result ... best cooler only shine when u could push to the limit ... |
|
|
Feb 7 2007, 10:18 PM
|
|
VIP
4,809 posts Joined: Jan 2005
|
QUOTE(Doom @ Feb 7 2007, 10:06 PM) which one would be the best depend on whether u really have the hot mobo to test it out .... some review site may not push the chip to the hottest level.. true and not true.this may generate inaccurate result ... best cooler only shine when u could push to the limit ... a good chipset cooler will prolong the life of the chipset, regardless whether it is being pushed or not it just means that a better chipset cooler can cool down a hotter chipset well, while on the other hand if u run stock, it will prolong the life of ur chipset too |
|
|
Feb 7 2007, 10:46 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(Doom @ Feb 7 2007, 10:06 PM) which one would be the best depend on whether u really have the hot mobo to test it out .... some review site may not push the chip to the hottest level.. 37-40C with HR-05 is not hot enuf?? this may generate inaccurate result ... best cooler only shine when u could push to the limit ... When my NB is 38C (from Everest ultimate vers.) I cant even accidently touch the NB. Its really really hot !! Moreover, most of us wont push the NB to the extreme for mormal use rite?? So cooling for idle/ normal use rate is important too. |
|
|
Feb 7 2007, 10:50 PM
|
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
yehlai is correct in some sense.
IMO, lower temp for computer parts is always a good news no matter whether you are OC or default speed. |
|
|
Feb 7 2007, 10:52 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(yehlai @ Feb 7 2007, 10:46 PM) 37-40C with HR-05 is not hot enuf?? how u do know its NB temp?When my NB is 38C (from Everest ultimate vers.) I cant even accidently touch the NB. Its really really hot !! Moreover, most of us wont push the NB to the extreme for mormal use rite?? So cooling for idle/ normal use rate is important too. there is no temp sensor for 965pt,the one u mentioned is mobo temp,try use 40mm fan blow only ur NB heatsink,see will it drop? btw..37-40 is ok only,not so hot yet |
|
|
Feb 7 2007, 10:53 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
What might be the best NB cooler out there?TR?Noctua?How about those Jing Ting NB cooler?I kinda like them.Might wanna find a replacement for my Zalman as i am currently looking for a new mobo...Any good recomendation which is a great bang for buck?
|
|
|
Feb 7 2007, 10:58 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(coolice @ Feb 7 2007, 10:52 PM) how u do know its NB temp? No wonder. Then it should be hotter than 38C think. Becos i cant touch the HS, feel like burning my finger. 965PT NB 1.55v setting = >1.8V actually.there is no temp sensor for 965pt,the one u mentioned is mobo temp,try use 40mm fan blow only ur NB heatsink,see will it drop? btw..37-40 is ok only,not so hot yet |
|
|
Feb 7 2007, 11:28 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
This does looks cool, and i believe it will defeat all other chipset heatsink while on passive cooling.
 Just my thoughts though... |
|
|
Feb 7 2007, 11:35 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
kasi hantam satulaa shawty..but eh this is new company..only place i see selling is heatsinkfactory only..
so cool looking |
|
|
Feb 8 2007, 02:33 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(PowerSlide @ Feb 7 2007, 11:35 PM) kasi hantam satulaa shawty..but eh this is new company..only place i see selling is heatsinkfactory only.. Hantam satu?so cool looking U gila ka, i'm still not fully enjoying my NC-U6, now u want me to get that CNB-R1...? Not yet liao, after it's proved that the CNB-R1 could beat or maybe be on par with NC-U6 on passive cooling, i will buy it. Now i'm concentrating on getting a speaker. |
|
|
Feb 8 2007, 02:49 AM
|
|
Senior Member
7,173 posts Joined: Jan 2003 From: PCH
|
QUOTE(sHawTY @ Feb 7 2007, 11:28 PM) This does looks cool, and i believe it will defeat all other chipset heatsink while on passive cooling. huah...very nice looking chipset cooler, i wonder bout the clearance with SLI setup since that pix's AGP board » Click to show Spoiler - click again to hide... « Just my thoughts though... ... |
|
|
Feb 8 2007, 07:48 AM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
QUOTE(sHawTY @ Feb 8 2007, 02:33 AM) Hantam satu? aiseh u r heatsink prince must hantam onelaa..dun like jus sold it off! U gila ka, i'm still not fully enjoying my NC-U6, now u want me to get that CNB-R1...? Not yet liao, after it's proved that the CNB-R1 could beat or maybe be on par with NC-U6 on passive cooling, i will buy it. Now i'm concentrating on getting a speaker. this will work well with a fan i presume since its copper.. |
|
|
Feb 8 2007, 09:14 AM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(PowerSlide @ Feb 8 2007, 07:48 AM) aiseh u r heatsink prince must hantam onelaa..dun like jus sold it off! If the air flow in casing good enough then no need fan also work well right? btw, hot to attach fan on it ler, or just blow it from side... this will work well with a fan i presume since its copper.. |
|
|
Feb 8 2007, 03:21 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
now bang shawty i praise u for finding taht one..i know ive been a bit critic of u lately... no hard feelings...ok... neway that heatsink will beat alot of heatsink out theres.... but..u will need to use a fan for max performance.... if u use passive, u will get normal performance, as these pins style hsfs are desinged for active coolind... anyway i still recommend a hr-05 for everything. for its price its kick ass.... its only expensive here..if u check in newegg sometimes its only 15.99 usd....
|
|
|
Feb 8 2007, 05:15 PM
|
|
Senior Member
775 posts Joined: Sep 2006 From: Sungai Mati, Muar, Johor ; Now at Wangsa Maju, KL.
|
QUOTE(lolhalol @ Feb 8 2007, 03:21 PM) now bang shawty i praise u for finding taht one..i know ive been a bit critic of u lately... no hard feelings...ok... neway that heatsink will beat alot of heatsink out theres.... but..u will need to use a fan for max performance.... if u use passive, u will get normal performance, as these pins style hsfs are desinged for active coolind... anyway i still recommend a hr-05 for everything. for its price its kick ass.... its only expensive here..if u check in newegg sometimes its only 15.99 usd.... If I not mistake, is PowerSlide who found this product...and post at other thread there... bro sHawTY...no hard feeling ya... |
|
|
Feb 8 2007, 05:19 PM
|
|
Senior Member
6,035 posts Joined: Jan 2003 From: Penang
|
hehe..who find not important laa..who can bring in for us more important
|
|
|
Feb 8 2007, 06:23 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(lolhalol @ Feb 8 2007, 03:21 PM) now bang shawty i praise u for finding taht one..i know ive been a bit critic of u lately... no hard feelings...ok... neway that heatsink will beat alot of heatsink out theres.... but..u will need to use a fan for max performance.... if u use passive, u will get normal performance, as these pins style hsfs are desinged for active coolind... anyway i still recommend a hr-05 for everything. for its price its kick ass.... its only expensive here..if u check in newegg sometimes its only 15.99 usd.... Huh? U did critic me? When? Haih, this is a forum liao, if you take someone's word as offensive, you won't live long enough in this forum *I'm talking about gozila84* But, what you've said is kinda true about how to push that heatsink to the max with active cooling. But the problem is, how are you going to fit a fan on that CNB-R1? Kinda hard to think of a way to put a fan on that heatsink... This post has been edited by sHawTY: Feb 8 2007, 06:24 PM |
|
|
Feb 8 2007, 08:20 PM
|
|
VIP
4,809 posts Joined: Jan 2005
|
QUOTE(sHawTY @ Feb 7 2007, 11:28 PM) This does looks cool, and i believe it will defeat all other chipset heatsink while on passive cooling. good stuff there. » Click to show Spoiler - click again to hide... « Just my thoughts though... anymore additional information on it? |
|
|
Feb 9 2007, 01:53 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(DaRkSyThE @ Feb 8 2007, 08:20 PM) good stuff there. Here:anymore additional information on it? http://www.enzotechnology.com/northbridge.htm |
|
|
Feb 9 2007, 04:55 PM
|
Junior Member
160 posts Joined: Mar 2006 From: Klang... tesco klang
|
QUOTE(sHawTY @ Feb 8 2007, 12:28 AM) This does looks cool, and i believe it will defeat all other chipset heatsink while on passive cooling. what's the dimension? if it's on the right size, we could just attach a clear acrylic around it and change it into a water block! since the fins are perfect for that kinda cooling... hehehe. Just my thoughts though... |
|
|
Feb 9 2007, 05:45 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
man... get a 50mmx 100mm thick fan, noisy but pushes bout 60cfm, at extreme pressure, i use to use it to clean dust for my case... lol.... neway yeah lah i got critic u wat... quite a lot. read back n can c some...and by the way this place is called hard modding so if u can get it to fit then u dun belong here
This post has been edited by lolhalol: Feb 9 2007, 05:46 PM |
|
|
Feb 9 2007, 06:55 PM
|
|
VIP
4,809 posts Joined: Jan 2005
|
QUOTE(sHawTY @ Feb 9 2007, 01:53 AM) based on what ive read, it seems very much like the swiftech hsf.its just that this is rounder, and wider in a sense. this should outperform the swiftech one easy |
|
|
Feb 10 2007, 01:18 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
yes...coz same design concepts... but i still love my hr-05 ...imo no one can eer come close to it....
|
|
|
Feb 10 2007, 02:25 PM
|
|
Senior Member
1,052 posts Joined: Oct 2006 From: Malaysia
|
is this the only product make from forging method?
|
|
|
Feb 10 2007, 08:58 PM
|
|
VIP
4,809 posts Joined: Jan 2005
|
QUOTE(id86 @ Feb 10 2007, 02:25 PM) is this the only product make from forging method? i think swiftech's one is forged in one solid piece too, though, i have yet to see its performace |
|
|
Feb 10 2007, 10:09 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Wow..that enzo looks..."cute".lol..It does really outperform every other nb cooler out there?Thats surprising..
|
|
|
Feb 11 2007, 09:49 AM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
the zalman looks like flower one good or not? becos i cant find any better chipset cooler oleidi..
|
|
|
Feb 11 2007, 09:54 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(ben3003 @ Feb 11 2007, 09:49 AM) the zalman looks like flower one good or not? becos i cant find any better chipset cooler oleidi.. Better than stock nb but not as good as those TR and Noctua i guess..My friend who is using DFI Lanparty Venus is complaining about the flower being too hot.But the temperature is still better than the stock DFI nb cooler... |
|
|
Feb 11 2007, 05:24 PM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
but my mobo cannot support those "tower" chipset cooler ma.. the big typhoon vx block their way, shawty recommend me pccooler but cant find in msia..
|
|
|
Feb 11 2007, 09:31 PM
|
Senior Member
2,386 posts Joined: Jan 2003 From: Many calls it "Hell"
|
Hi guys,
I'm using a DFI LP NF4 Ultra-d, and i'm not happy with what the stock DFI chipset cooler is doing. I'm using a Galaxy 7300GT where 1 cm of my card is actually on the mobo's stock cooler. I'm looking for a 3rd party cooler to do the job, and tight on budget, anything value for money which will fit my mobo to recommend? |
|
|
Feb 12 2007, 02:31 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(ben3003 @ Feb 11 2007, 05:24 PM) but my mobo cannot support those "tower" chipset cooler ma.. the big typhoon vx block their way, shawty recommend me pccooler but cant find in msia.. Uglyvamp is organising a 8800GTS bulk now, why don't u pm him regarding the NB-400CU? It's better to wait for a week for the delivery from uglyvamp than waiting forever just to find someone's who's willing to sell that heatsink to you in here. |
|
|
Feb 12 2007, 10:38 AM
|
|
All Stars
13,191 posts Joined: Jul 2006
|
QUOTE(@meno @ Feb 11 2007, 09:31 PM) Hi guys, many DFI nF4 users change to Evercool VC-RE / VC-RFI'm using a DFI LP NF4 Ultra-d, and i'm not happy with what the stock DFI chipset cooler is doing. I'm using a Galaxy 7300GT where 1 cm of my card is actually on the mobo's stock cooler. I'm looking for a 3rd party cooler to do the job, and tight on budget, anything value for money which will fit my mobo to recommend? |
|
|
Feb 12 2007, 04:57 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
i use teh hr-05 for my ultra d... i think can fit coz the hr-05 is very flexible in mounting... but if u wan budget , u cant go wrong with teh evercool, or the pc cooler ones... cheap... and works at leats beter than stck,...
|
|
|
Feb 12 2007, 06:07 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(ktek @ Feb 12 2007, 10:38 AM) many DFI nF4 users change to Evercool VC-RE / VC-RF I agree with you on this.The evercool seems to be a good choice for DFI NF4 users.Its not that expensive as well and not to mention good performance..The Zalman flower is ok but doesnt really work well..You can still feel the great amount of heat. This post has been edited by akachester: Feb 12 2007, 06:08 PM |
|
|
Feb 12 2007, 08:17 PM
|
|
Senior Member
2,386 posts Joined: Jan 2003 From: Many calls it "Hell"
|
Thanx for the suggestion guys.
Seems the best choice will be the VC-RE/VC-RF since i'm tight on budget. I'd like the HR-05 SLI but just out of my budget. @Shawty, can give special discount ar? But i have another question here, will the VC-RF fit directly without any modding? Cz VC-RE is a vga/chipset cooler while VC-RF is only labelled as a vga cooler. Just curious. |
|
|
Feb 12 2007, 09:49 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(@meno @ Feb 12 2007, 08:17 PM) Thanx for the suggestion guys. Special discount aa?Seems the best choice will be the VC-RE/VC-RF since i'm tight on budget. I'd like the HR-05 SLI but just out of my budget. @Shawty, can give special discount ar? But i have another question here, will the VC-RF fit directly without any modding? Cz VC-RE is a vga/chipset cooler while VC-RF is only labelled as a vga cooler. Just curious. Cannot la boss.. Anyway, i don't think there should be any clearance problem fitting VC-RF on you're motherboard. It should be a perfect fit. |
|
|
Feb 13 2007, 08:24 AM
|
|
All Stars
10,859 posts Joined: Jan 2003 From: Sarawak
|
i tried to pm uglyvamp since u recommended me the chipset cooler.. but until now still no news from him. I try to contact him again.. got any alternative to that in case he really din get in the thing again?
|
|
|
Feb 13 2007, 04:56 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
teh evercool wan is the same design as teh tstock hsf, just materials and finishing is beter...also bigeer surface area if i remember correcly...
|
|
|
Feb 13 2007, 07:51 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
New EVERCOOL Chipset Cooler
EVERCOOL SERPENT Official Website: http://www.evercool.com.tw/products/nca-610.htm Some Pictures:       Features: . Exculsive clip can suitable for all kinds of North Bridge chipset. . Fanless or Silent Fan style can be choose by user, to fits overclocking or slient environment. . The unique U type heat pipe is better than L type to strengthen heat distribution. . Uses 6cm fan design gets big air flow and low noise. Added on February 13, 2007, 7:52 pmAnyone who wants a Noctua LC-U6 for free, buy this Evercool Serpent chipset heatsink, and trade it with my LC-U6 This post has been edited by sHawTY: Feb 13 2007, 07:53 PM |
|
|
Feb 13 2007, 08:04 PM
|
Senior Member
3,902 posts Joined: Jul 2005 From: Sin Lor, B'worth,Pg.
|
not quite as shiny
not to offend.... the zalman flower type(screwing fins together) seems shinier maybe the viewing angle.... edit: shiny here is smooth....... This post has been edited by mcchin: Feb 13 2007, 08:05 PM |
|
|
Feb 13 2007, 08:25 PM
|
|
VIP
4,809 posts Joined: Jan 2005
|
seems to look very good. but i think its performance will lose out to thermalright.
as for the base not being shinny, that isnt a very big factor, well not as far as im concerned coz the area of heat absoprtion is rather small |
|
|
Feb 13 2007, 08:34 PM
|
|
Senior Member
3,902 posts Joined: Jul 2005 From: Sin Lor, B'worth,Pg.
|
QUOTE(DaRkSyThE @ Feb 13 2007, 08:25 PM) seems to look very good. but i think its performance will lose out to thermalright. not necessary the caseas for the base not being shinny, that isnt a very big factor, well not as far as im concerned coz the area of heat absoprtion is rather small like my own personal table heater, nforce4sli chipsetthe core itself is actually have a small footprint |
|
|
Feb 13 2007, 08:58 PM
|
|
VIP
4,809 posts Joined: Jan 2005
|
QUOTE(mcchin @ Feb 13 2007, 08:34 PM) not necessary the case gosh, then it seems that u arent providing adequate cooling like my own personal table heater, nforce4sli chipsetthe core itself is actually have a small footprint mine seems to be good. 40 degrees and 45 degrees load. stock hsf |
|
|
Feb 13 2007, 10:20 PM
|
|
Senior Member
3,902 posts Joined: Jul 2005 From: Sin Lor, B'worth,Pg.
|
QUOTE(DaRkSyThE @ Feb 13 2007, 08:58 PM) gosh, then it seems that u arent providing adequate cooling nopemine seems to be good. 40 degrees and 45 degrees load. stock hsf nforce4 sli is know for the heat it generates some say it will withstand up till 80 degrees mine hover in that range ~70 with stock heat sink after change to zalman flower type is ~56 degrees |
|
|
Feb 14 2007, 03:54 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
shawty...that cooler will lose to our hr-05... confirm..look at the fins..so little...anyway, the base has lousy finishing man.... kinda crappy.... hr-05 although is not smooth its flat... no to meantion it has mounting flexibility and fan flexibility...
|
|
|
Feb 14 2007, 08:11 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(lolhalol @ Feb 14 2007, 03:54 PM) shawty...that cooler will lose to our hr-05... confirm..look at the fins..so little...anyway, the base has lousy finishing man.... kinda crappy.... hr-05 although is not smooth its flat... no to meantion it has mounting flexibility and fan flexibility... Err...Bila plak aku ada HR-05? I'm using NC-U6 dude! I don't care if it losses to my NC-U6, i just love the design! Anyone wants a free NC-U6? |
|
|
Feb 14 2007, 08:45 PM
|
|
Senior Member
3,902 posts Joined: Jul 2005 From: Sin Lor, B'worth,Pg.
|
me me me me me me me me me
:lol |
|
|
Feb 14 2007, 09:13 PM
|
|
Senior Member
4,539 posts Joined: Feb 2006 From: LocOmoT|oN.L0co|oti0N
|
QUOTE(sHawTY @ Feb 14 2007, 08:11 PM) Err... P.M me a nice price laa fren...Bila plak aku ada HR-05? I'm using NC-U6 dude! I don't care if it losses to my NC-U6, i just love the design! Anyone wants a free NC-U6? |
|
|
Feb 14 2007, 09:19 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(mcchin @ Feb 14 2007, 08:45 PM) me me me me me me me me me Then go buy the Evercool Stinger and trade it with me... :lol |
|
|
Feb 15 2007, 01:10 AM
|
|
Senior Member
2,386 posts Joined: Jan 2003 From: Many calls it "Hell"
|
Ermm...Evercool VC-RF can ar???
Tot u really gonna give it for free... P.S: I'm just too naive... |
|
|
Feb 15 2007, 01:22 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(@meno @ Feb 15 2007, 01:10 AM) Ermm...Evercool VC-RF can ar??? Yeah...Tot u really gonna give it for free... P.S: I'm just too naive... Dream On!!! |
|
|
Feb 15 2007, 04:58 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
haha.....forgot .... anyway well it looks good but i think u beli the hr-05 beter man.... also more seexy....
|
|
|
Feb 15 2007, 08:38 PM
|
|
Senior Member
1,052 posts Joined: Oct 2006 From: Malaysia
|
|
|
|
Feb 16 2007, 09:49 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
there is review on it .. i think u could google a bit.
the performance is not bad but it must go with the fan else huge drop... good in term of size as not too big ... however not that silence compare to HR-05 & SLI .. |
|
|
Feb 16 2007, 10:45 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(id86 @ Feb 15 2007, 08:38 PM) You call that a nice design?TT Extreme Spirit is the most ugliest 3rd party chipset heatsink eva! Euwww.... |
|
|
Feb 16 2007, 04:55 PM
|
|
Senior Member
1,052 posts Joined: Oct 2006 From: Malaysia
|
QUOTE(sHawTY @ Feb 16 2007, 10:45 AM) You call that a nice design? why not?it come with LED.blink blink TT Extreme Spirit is the most ugliest 3rd party chipset heatsink eva! Euwww....  and also has fan.no need to buy other fan |
|
|
Feb 16 2007, 09:28 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(id86 @ Feb 16 2007, 04:55 PM) why not?it come with LED.blink blink Bling bling? and also has fan.no need to buy other fanDo you need bling bling or good performance? I don't need bling bling, bling bling is the latest thing i seek for. Performance is no. 1. |
|
|
Feb 16 2007, 11:20 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sHawTY @ Feb 16 2007, 10:45 AM) You call that a nice design? lol...100% agree with you on this.I always dont like the design of the TT Nb cooler.Even those CM Nb coolers got LED as well...TT Extreme Spirit is the most ugliest 3rd party chipset heatsink eva! Euwww.... |
|
|
Feb 16 2007, 11:20 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Sorry Double Posted...
This post has been edited by akachester: Feb 16 2007, 11:20 PM |
|
|
Feb 17 2007, 03:33 AM
|
|
Senior Member
1,052 posts Joined: Oct 2006 From: Malaysia
|
QUOTE(akachester @ Feb 16 2007, 11:20 PM) lol...100% agree with you on this.I always dont like the design of the TT Nb cooler.Even those CM Nb coolers got LED as well... ohh...maybe citarasa kita berbeza....hope this cooler can provide good performance to pc and not far behind the high end cooler |
|
|
Feb 17 2007, 10:49 AM
|
|
Senior Member
4,496 posts Joined: Apr 2005 From: KL
|
some like copper while some like the heat pipe design .. so let it be for the forumer to choose their own liking.
however if performance is concern than HR-05 is no doubt ... it also depend the budget and performance level u are looking for .. if u are cooling a mobo chip set that ain't so hot than it should be fine ended with TT Extreme spirit .. do remember if the fan fail it could be tricky to get replacement ... |
|
|
Feb 17 2007, 02:39 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
yes very thru, thats y hr-05 series is so good ...or thermalright.... they never (usualyl dun) ship hsfs with fans for this reason....
|
|
|
Feb 18 2007, 04:24 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Just wondering, by comparing side by side, which one is a better buy?The Noctua NCU6 or the Thermalright HR05?
My cousin is considering between this 2 and would love to know in term of performance which one is better (considering that the price are almost the same)? |
|
|
Feb 18 2007, 04:48 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(akachester @ Feb 18 2007, 04:24 PM) Just wondering, by comparing side by side, which one is a better buy?The Noctua NCU6 or the Thermalright HR05? performance!!! My cousin is considering between this 2 and would love to know in term of performance which one is better (considering that the price are almost the same)? easy, just google need to say more? go for Noctua la This post has been edited by E-J@1: Feb 18 2007, 04:49 PM |
|
|
Feb 18 2007, 06:15 PM
|
|
VIP
4,809 posts Joined: Jan 2005
|
QUOTE(E-J@1 @ Feb 18 2007, 04:48 PM) performance!!! the thing is that not everyone can go for the noctua. easy, just google need to say more? go for Noctua la due to new VGA's which are getting longer, and longer, it might be a tad bi of a porb to fit one in a very good example of a person in this situation is me. cant seem to use it with a 7950 gx2 what more a 2900XTX >< |
|
|
Feb 18 2007, 06:53 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(DaRkSyThE @ Feb 18 2007, 06:15 PM) the thing is that not everyone can go for the noctua. hmmm, good point there, so in ur case, the HR SLI will fits rite due to new VGA's which are getting longer, and longer, it might be a tad bi of a porb to fit one in a very good example of a person in this situation is me. cant seem to use it with a 7950 gx2 what more a 2900XTX >< wah, planning to go for Radeon 2900XTX why not goin for GeForce 8950 GX2 itu 7950 kasi tambah 1000 lg la 8900 GTX = 128 + 25% more shaders = 160 shaders 8950 GX2 = more than 160 , maybe 200 shaders This post has been edited by E-J@1: Feb 18 2007, 06:58 PM |
|
|
Feb 18 2007, 10:56 PM
|
|
VIP
4,809 posts Joined: Jan 2005
|
QUOTE(E-J@1 @ Feb 18 2007, 06:53 PM) hmmm, good point there, so in ur case, the HR SLI will fits rite ouchies. off topic jor. wah, planning to go for Radeon 2900XTX why not goin for GeForce 8950 GX2 itu 7950 kasi tambah 1000 lg la 8900 GTX = 128 + 25% more shaders = 160 shaders 8950 GX2 = more than 160 , maybe 200 shaders well, i personally i love the the noctua, just that it cant fit only. thats why i probally have to settle with the HR-05 well, i got my little hands on a coolermaster aquagate (not the mini one. this is the one that slots into the 2 front bays of ur pc, and its built for cooling down cpu's), but im planning in modding it to fit my chipset, considering that if it only cool the northbrige, i would not need such a powerful watercooling system |
|
|
Feb 18 2007, 11:32 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(DaRkSyThE @ Feb 18 2007, 06:15 PM) the thing is that not everyone can go for the noctua. This is the problem that had been for my cousin.The VGA (a mere 7600GS is already being block by the Zalman Flower.He had to twist it sideways on his DFI board but now, when he wanted to change the stock VGA cooler, it seems to clash with the Zalman.He had been looking alot on the Noctua but it seems does not fit though..Maybe the only choice is the TR SLI..due to new VGA's which are getting longer, and longer, it might be a tad bi of a porb to fit one in a very good example of a person in this situation is me. cant seem to use it with a 7950 gx2 what more a 2900XTX >< |
|
|
Feb 20 2007, 12:46 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
I'm going for DQ6 afterwards.
And sadly, i can't use my NC-U6 with that motherboard anymore... Haih.. I love that chipset heatsink. Gonna start opening a new topic to sell that heatsink later on. |
|
|
Feb 21 2007, 11:28 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sHawTY @ Feb 20 2007, 12:46 PM) I'm going for DQ6 afterwards. lol..then what are you going for next?And sadly, i can't use my NC-U6 with that motherboard anymore... Haih.. I love that chipset heatsink. Gonna start opening a new topic to sell that heatsink later on. |
|
|
Feb 21 2007, 04:29 PM
|
Senior Member
1,597 posts Joined: Nov 2005
|
hey guys,
wta what is a good sb and pwm cooler, dont think u can t fit a hr05-sli on the sb right, mounts are different.....thx |
|
|
Feb 21 2007, 05:38 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(akachester @ Feb 21 2007, 11:28 AM) lol..then what are you going for next? I'm not going for anything, as i can't fit any kinds of chipset heatsink in the DQ6 as there's stupid heatpipes here & there. |
|
|
Feb 21 2007, 06:38 PM
|
Junior Member
115 posts Joined: May 2006 From: Kuantan-Pahang
|
QUOTE(sHawTY @ Feb 21 2007, 05:38 PM) I'm not going for anything, as i can't fit any kinds of chipset heatsink in the DQ6 as there's stupid heatpipes here & there. why dun remove the pipes??fix u noutua at NB then buy one more SB cooler and add little heatsink on mosfet then ok la |
|
|
Feb 21 2007, 07:37 PM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
u cant actually...as dq6 has that stupic cooling pad on the underside of the board with propreiety mounting, so its a bit dangerousrs....i think... but welll shawty u can always buy the board the c whether can fit or not...
|
|
|
Feb 21 2007, 09:04 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(lolhalol @ Feb 21 2007, 07:37 PM) u cant actually...as dq6 has that stupic cooling pad on the underside of the board with propreiety mounting, so its a bit dangerousrs....i think... but welll shawty u can always buy the board the c whether can fit or not... I already have the DQ6 in my hands.Been looking it for 2 hours. It's not about the cooling pad under the board. It's the heatpipes!!! All those heatpipes are connected to the mosfets, pwms, northbridge and southbridge. How the hell are you going to remove the heatpipes? Yes, there's only one way to do it, how? By cutting the heatpipes! But i'm not going to do that, as by doing that will void the warranty for my motherboard. But hey, i've thinked of one simple solution. Fix a 40mm fan on each of the heatsink together with the PWM & the mosfet heatsink. And i'm going to replace all those thermal pads and thermal paste under the heatsinks with AS5. I hate those heatpipes. This post has been edited by sHawTY: Feb 21 2007, 09:05 PM |
|
|
Feb 21 2007, 09:19 PM
|
|
All Stars
10,530 posts Joined: Nov 2004 From: Petaling Jaya & Mid Valley
|
cut away the heatpipes?? u cut the heatpipes not only void warranty la bro...
the fluid in the heatpipe will all flow out... making the heatpipes USELESS |
|
|
Feb 21 2007, 09:38 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
QUOTE(sHawTY @ Feb 21 2007, 09:04 PM) I already have the DQ6 in my hands. lol..i thought the main attraction on that particular board would be the heatpipes..Anyway, would the NCU6 perform better than those heatpipes?Been looking it for 2 hours. It's not about the cooling pad under the board. It's the heatpipes!!! All those heatpipes are connected to the mosfets, pwms, northbridge and southbridge. How the hell are you going to remove the heatpipes? Yes, there's only one way to do it, how? By cutting the heatpipes! But i'm not going to do that, as by doing that will void the warranty for my motherboard. But hey, i've thinked of one simple solution. Fix a 40mm fan on each of the heatsink together with the PWM & the mosfet heatsink. And i'm going to replace all those thermal pads and thermal paste under the heatsinks with AS5. I hate those heatpipes. |
|
|
Feb 21 2007, 10:12 PM
|
|
Senior Member
1,597 posts Joined: Nov 2005
|
QUOTE(sHawTY @ Feb 21 2007, 09:04 PM) I already have the DQ6 in my hands. u can remove the heatpipes inlcuding the crazy cool, its removable and u can stick it back later, so wont void the warranty.Been looking it for 2 hours. It's not about the cooling pad under the board. It's the heatpipes!!! All those heatpipes are connected to the mosfets, pwms, northbridge and southbridge. How the hell are you going to remove the heatpipes? Yes, there's only one way to do it, how? By cutting the heatpipes! But i'm not going to do that, as by doing that will void the warranty for my motherboard. But hey, i've thinked of one simple solution. Fix a 40mm fan on each of the heatsink together with the PWM & the mosfet heatsink. And i'm going to replace all those thermal pads and thermal paste under the heatsinks with AS5. I hate those heatpipes. |
|
|
Feb 21 2007, 11:10 PM
|
|
Senior Member
7,338 posts Joined: Jan 2003 From: Cybercity of Cyberjaya
|
yeah.. just remove those crazy cool and all the heatpipes.. then put on better nb cooling there. for sb, normal heatsink will do just fine and for pwm, small ramsinks are more than enuff
|
|
|
Feb 22 2007, 12:21 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(cablesguy @ Feb 21 2007, 10:12 PM) u can remove the heatpipes inlcuding the crazy cool, its removable and u can stick it back later, so wont void the warranty. QUOTE(irenic @ Feb 21 2007, 11:10 PM) yeah.. just remove those crazy cool and all the heatpipes.. then put on better nb cooling there. for sb, normal heatsink will do just fine and for pwm, small ramsinks are more than enuff How?The thing is, the heatpipes are welded to the southbridge, the northbridge, the pwm's and the mosfet heatsink. If i remove the it, that means i have to remove all the things that is connected. And by doing this, i won't be able to cool down those hot pwms & mosfets. The northbridge & southbridge chipset heatsink can be replaced with 3rd party heatsink, but, how to deal with the PWM's & mosfet? |
|
|
Feb 22 2007, 12:59 AM
|
|
Senior Member
1,597 posts Joined: Nov 2005
|
im no expert but u see the white pins/knobs nearest nb, sb and pwm.....use a needle nose plier frm the back and push it out, i think the pwm's uses some sort of thermal tape so u have to use a blade of some sort to gently scrape it out....actually after running that board, i think the stock heatpipes are quite well laid out....compared with the Asus commmando.....the dq6 is 1-2'c cooler...and unless youre going for max oc, i thnk the stock heatpipes are more than adequate for mild oc with maybe just a fan over...again im no expert just my thots.
|
|
|
Feb 22 2007, 10:31 AM
|
|
Junior Member
115 posts Joined: May 2006 From: Kuantan-Pahang
|
QUOTE(sHawTY @ Feb 22 2007, 12:21 AM) How? put vga ram heatsink on mosfet PWM's then ok loThe thing is, the heatpipes are welded to the southbridge, the northbridge, the pwm's and the mosfet heatsink. If i remove the it, that means i have to remove all the things that is connected. And by doing this, i won't be able to cool down those hot pwms & mosfets. The northbridge & southbridge chipset heatsink can be replaced with 3rd party heatsink, but, how to deal with the PWM's & mosfet? |
|
|
Feb 22 2007, 11:55 AM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(F@NT@sy_G@RRic @ Feb 22 2007, 10:31 AM) put vga ram heatsink on mosfet PWM's then ok lo Don't you think those ram heatsink is too small for those pwm & mosfet? Those PWM & mosfet is freaking hot i'd tell ya. |
|
|
Feb 23 2007, 03:57 AM
|
Senior Member
2,765 posts Joined: Nov 2005 From: **Hornbills**
|
huhu i oredi pull out my heatpipe on commando..will put the ramsink later after item send by my seller..erm for my mobo i check oredi..its jus nice wit the ramsink
|
|
|
Feb 24 2007, 09:37 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
SunnyStone SS HA-001 aka jingting 2nd gen??
http://www.iamxtreme.net/coolaler/SunnyStoneNBcooler/1.JPG http://www.iamxtreme.net/coolaler/SunnyStoneNBcooler/2.JPG http://www.iamxtreme.net/coolaler/SunnyStoneNBcooler/3.JPG 8mm heatpipe edited:pic from coolaler This post has been edited by coolice: Feb 24 2007, 09:37 PM |
|
|
Feb 24 2007, 09:40 PM
|
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
wow... that one looks very impressive. any review yet?
|
|
|
Feb 24 2007, 09:46 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(irangan @ Feb 24 2007, 09:40 PM) wow... that one looks very impressive. any review yet? the only one i found is by coolaler http://forum.coolaler.com/showthread.php?t=147150 This post has been edited by coolice: Feb 24 2007, 09:59 PM |
|
|
Feb 24 2007, 10:38 PM
|
|
Senior Member
1,201 posts Joined: Dec 2004 From: Kuala Lumpur
|
QUOTE(coolice @ Feb 24 2007, 09:46 PM) errr.. ok... thanks*looking for my gf to translate for me. haha. |
|
|
Feb 24 2007, 10:56 PM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Gosh, is that for sale anywhere?I had always been a great fan of JingTing products but its heard to find it here...
|
|
|
Feb 25 2007, 12:16 AM
|
|
Senior Member
1,823 posts Joined: Mar 2006 From: Kuala Lumpur
|
haha..that looks nice, but isnt abit complicated mounting procedures..so many screws....hehe hr-05 is only two plastic clips and a cross bar.... also translates into cheaper manufacturing costs, and less problems.... also if u mess up the screws u aint gonaget good mounting pressure also can cause a cracked chipset core( imean if u screw one side more than the other...) happens alot in watercooling cpu blocks...
|
|
|
Feb 25 2007, 07:23 AM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
may be jingting user can give some comment,in coolaler,they claims this mounting better and easier than jingting
|
|
|
Feb 25 2007, 10:29 AM
|
|
Senior Member
7,689 posts Joined: Jul 2005 From: The Land of No Return
|
Would those JingTing perform better than TR or Noctua?lol...Hope can ask my brother to get me one when he go Taiwan for holiday...lol..
|
|
|
Feb 25 2007, 10:32 AM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
QUOTE(akachester @ Feb 25 2007, 10:29 AM) Would those JingTing perform better than TR or Noctua?lol...Hope can ask my brother to get me one when he go Taiwan for holiday...lol.. count me in for 1 unit also |
|
|
Feb 25 2007, 01:11 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
The thing is, that chipset cooler is freakin' ugly.
I'm not into bling bling factors, but this is one is too ugly. I'm tokin about the SunnyStone SS HA-001 |
|
|
Feb 25 2007, 03:11 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
yeah,if the fin is oval shape definitely will looks better,i don like the side convex out
|
|
|
Feb 25 2007, 04:30 PM
|
|
Senior Member
2,603 posts Joined: Sep 2006
|
QUOTE(sHawTY @ Feb 25 2007, 01:11 PM) The thing is, that chipset cooler is freakin' ugly. I'm not into bling bling factors, but this is one is too ugly. I'm tokin about the SunnyStone SS HA-001 » Click to show Spoiler - click again to hide... « heh i thought u don't care bout the looks (ugly/bling-bling)...like u stated, u wanna bling-bling or performance... then let me say, u want good looking or performance |
|
|
Feb 25 2007, 05:20 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(E-J@1 @ Feb 25 2007, 04:30 PM) » Click to show Spoiler - click again to hide... « heh i thought u don't care bout the looks (ugly/bling-bling)...like u stated, u wanna bling-bling or performance... then let me say, u want good looking or performance And the NC-U6 & the HR-05 is very handsome you know? But that SunnyStone SS HA-001 is freaking ugly... Just look at it's design, not handsome at all, but hansap! |
|
|
Feb 25 2007, 07:25 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
so conclusion is SunnyStone SS HA-001 fall into the place where the most ugliest 3rd party chipset heatsink?
actually TT extreme spirit II handsome also,by removing the fan mounting |
|
|
Feb 25 2007, 07:46 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
QUOTE(coolice @ Feb 25 2007, 07:25 PM) so conclusion is SunnyStone SS HA-001 fall into the place where the most ugliest 3rd party chipset heatsink? Yes.actually TT extreme spirit II handsome also,by removing the fan mounting It falls to the ugliest chipset heatsink. Eventhough i dont like thermaltake, but the design of the TT Extreme Spirit II is acceptable. The TT Extreme spirit II can be considered handsome. |
|
|
Feb 25 2007, 07:49 PM
|
|
Senior Member
1,857 posts Joined: Sep 2004 From: ocdrift.com
|
|
|
|
Feb 25 2007, 08:14 PM
|
|
All Stars
14,908 posts Joined: Jul 2005
|
Damn!
The first tower chipset heatsink that can directly fit with a 70MM fan! This is the most handsome Chipset heatsink to me~~ PCcooler HB-771S Look:   Can anyone please bring this thing here? Added on February 25, 2007, 8:33 pmMore pictures. And the most interesting part about this heatsink:  Can you see that the heatpipe hits directly to the core of the chipset? This is very good for those chipset that the core is an exposed core! By doing this, the heat will directly flown to the heatpipe! More pictures on this heatsink:   This post has been edited by sHawTY: Feb 25 2007, 08:33 PM |
| Change to: |  0.1777sec
 0.24
 6 queries
 GZIP Disabled
Time is now: 3rd December 2025 - 05:13 AM |
Quote
