Wow what a nice case you have there, i might ask my friend to get it for me next time when he return from SG.

btw does the rubber gromet you install on your rear exhaust fan comes with the casing or u got it from Vampzone ?

anyway nice case at nice price... too bad if MY forumer purposely go there and grab the case would be the same price as getting original Lian Li case ....transportation ... mah ....

so i will wait for my friend there ....

I got the casing today as well..... nice and really light .....

Will post the photo after getting back to malaysia .....

nice men ...at cheap price ....

Hehhe .. will try to post up the casing with my current rig moving from CM 530 that served me for 1 year only.... kidding

btw i got the case for SGDollar 119 .... which is around = RM279.12

so i guess it should be a nice price right .. some more it is black version ....

i saw the silver, black and navy blue.....but still like the black the most.... just like LG's slogan..."Black Temptation"!!

for those that interested to get the case .... there are 1 shop close by esclator that sold the navy blue color at 4th floor...

while the silver and black is available at 5th floor and also close by escalator....

the price is the same for both shops.... so it is hard to get discount anymore.....

Other lian li case are available at 4th and 5th floor as well... this even includes silverstone case.....

damn the HTPC case really lure me men .... too bad way out of budget ....

Cant help you with that men .... but what i could say it is really dark blue and the fellor there said it is black...

guess what there were two other casing onb each side that is black and really make the GT case does not look like black as the fellor told me... shih...wonder he is color blinded

since i was not happy with navy blue so continue the hunt until got the black and silver on 5th floor..

arrived MY just now and wanted snap shot photo bad battery run out ... so have to wait until tonight.....

Some photo as promises.... dont be suprise with the messy cables... coz i got not enough of time to arranged it yet.... will get it done on weekend..

Box:




Interior:








This post has been edited by Doom: Sep 12 2006, 12:40 AM

Photos after getting the rig moved in... will work on the cable management soon....

Installed:








Dark:

Basically no idea somemore the casing is well known for its simplicity ....so why bother mod it/..... maybe the sidepanel would be sent to uncle Ianho for some nice cutting ...

besides not enough of intention for nice UV bling bling as the stuffs inside would be kept for black and silver color as possible...

the fans is really kind of noisy and push low air... so will get it changed to my cooler master LED and UV fan...

Basically the CM fan will push more air cos i often use hand to determine the actual air pushed apart from checking the spec.....but mostly is the filter that blocked the air and causes sound as well..

About the HDD it does generate lots of sounds and vibration ... but the case is place on the self make movable tray and there is some sort of vibration absortion materials ... so the noise does not affect the bottom ...

the white optical is my DVD-RW ... i wish to get rid of it but cant coz lack of money .. will try to cover it with another way...

mostly will update the photos after getting up in the morning and do some modification .....

The mesh will be get rid of after getting the mesh filter ordered from the bulk section ... both front and rear that is .....

This post has been edited by Doom: Sep 12 2006, 01:39 AM

Minor changes done:





Uncle Ianho .... plz share with us here ahh

Direct us the briliant path....

Uncle Ianho has not saved us yet.... where is the solution men .... i had try to fit the hdd screw hole with some vibration absorbtion cushion... it is slightly better now....

uncle help us here!!

Alright basically it is a type of cushin pad that you could found in ACE hardware store.... it comes with various shape but i got the circle type..

i paste to the HDD directly and cut out the hole for screws... then just screw back to the hdd cage.. will try to get the photo done tonight...

the case also i applied some pad also ...now it is not as loud as before by quite a margin ... of course there is no way to be silent as the HDD is making so much of noise...

maybe getting Samsung spinpoint hdd would be great idea

What have did to it with this:



how it looks like as here,,, but not visible loh:



it really reduced the sound by par.... the left over sound is unavoidable ...

the grey one could absorb vibration of HDD by paste it to the HDD itself

while the black is for the case feet to reduce remaining vibration causes by HDD...

This post has been edited by Doom: Sep 14 2006, 10:38 PM

those two set of vibration pad cost less than RM10 in total men ... why would you say pokai ???

do u need some i can buy and post to you men ...

hahah ... just kidding can get it at XL hardware shop....

This post has been edited by Doom: Sep 15 2006, 12:31 AM

Like i said it is available at XL hardware shop... it has many branches u could try to look around in your area...

Why on earth eveyone relate this casing to PCB06 ??

This is the casing that being claimed as OEM by Lian Li



Lian Li PC-007

It is exactly the same as hte GT case here....

This post has been edited by Doom: Sep 15 2006, 08:52 AM

hehe... those are minor add on i added to prevent my self from getting scratched or cut by the edge of HDD cage....i like to do cable management so sometimes i may get cut or minor scratch during the process...so as the cables ...

it is known as U-Channel ... which is commonly use in modding by US or UK morder...

i got it from one of the bulk order earlier.....

Basically i didnt order much .... only the u-channel and some mesh filter... bu the filter is noisier than the original ...

so i decide to let it be with the original filter...

the following update would be focusing on getting the cables rearranged and some minor changes...

This is the latest update which also would be the last before i got any inspiration to do more....

some stuff done after whole day long of stress ... my first attempt !!


To extend the HDD power cord


To use on two optical drive


To connect case and PSU fan ..


To power up the HDD

Continue:

Overall look...


Rear of the case and mobo tray...


Close view of HDD area..


From side rear....

Enjoy it and comment is welcomed ...

To:mADmAN

Hopefully this help you inspire a bit more... i am really running out of juice for now...

Same here.... but i thought off using black sleeve for sleeving the normal ide cable so that is matches others.... but so far really lazy to do also ..... somemore the coolermaster ide cable look nice but too long