I'm back ~ =.= after claim back my car and done my immediate serbis realise:
1) damn ratling sound here and there
2) Additional dunno what Engine machanic sound when press gas pedal
3) i think the front right asoba (absorber) x minyak lagi, when went through our "flat" road got knocking sound
4) Now i'm running in :
    Front left Pirelli Cinturator P1 (New as of when accident)
    Front Right BS Turanza  AR 10 (Botak)
    Rear Left Ducaro GA (50% )
    Rear right Ducaro GA (Botak)

WTF ~

Reset DbW settings if u got lousy throttle response

1. Get in your car, it doesn't matter if you close the door or not.

2. Turn the key to the on (not start) position, the position just before the starter turns over.

3. Press the gas pedal to the floor with the key in the "on" position.

4. Hold the pedal to the floor for five seconds, then turn the key back
to the "off" position (don't remove the key), then release the gas
pedal.

5. Wait 2 mins. for a full alignment.

6. Drive the car as you always do.

Yesterday after wash car in the morning. I start engine and let it warm up and I notice our engine at cold create quite a lot of water vapor. How I found out because my hose to OCT is clear spring hose. I can see inside the  hose become opaque and have those white vapor flowing to the OCT but some condense at the OCT hose. This make some low hose area got stagnant water trap so I readjust my hose and OCT level so that all the water or oil can flow down to the OCT.

Just a note to those with OCT, try to reposition your OCT lower than the cylinder head and have the hose gradually flow downwards to the OCT. if not, the stagnant water and oil will flow back into the engine. Another way to make sure it don't flow back is to use a 1 way valve or a PCV valve. I will try to find if can get any 1 way valve and fit it after the cylinder head oil/vapor exit.

Never try never know

Wah ok i try tomorrow   

Why today lots of proton can't start one.

Btw, tonight small TT?

dares kenjilew davidke20 r3apers

thank you for the info. 
well...many choices of rims in halfcut for me...at a cheaper price of course 

Sigh .. it does't look good for my ride. The engine oil is leaking which makes the surface of the engine and the cover pretty dirty and oily with those black stains.

Problem now is that the leakage flow down to the metal surface which is quite heaty when the engine is working or on the move. The engine oil tend to be like 'grill' on the surface which turns out to be white smoke coming out of the engine cover.

What should I do ?

Official Henfon Rosaked Without Sign sardenly KOed Without Backup Without Shit Announcement

Those who fren² with me got my number, and still wish to keep in touch please SMS me your number, your nickname so I can key in balik. I don't want later u call me/sms me detaim jiu sei me no heart din keep jor number. So far, I managed to salvage a few as they SMSed me today and so happen I know who they are:

1) garybenjamin
2) vampirewong
3) titanrev

The rest of you guys I really lost your number liao. Ayam so sori

*Sniff *sniff

Tomolo need to vomit moolah go bai fon liao

Burberry.

Most prolly back to berry

Thanks for the quick info ..
Really ? Where is your workshop located ?
Perhaps you can PM me the details and price quote as well.
Hmm .. now that calms me down a little bit.
I supposed I will need to send the car to fix it - are you offering any service for this ?
Thanks

kenjilew 1.3 BLM MT @ 84hp

86.4 right...IINM 

Oh yeah..sorry taiko kenjilew give wrong info..lack of 2hp

The gorilla kenilew is 88.4 la. Adui. U both.

FYI i prefer Nexen handling than Pirelli loh ~ and Nexen not so noisy ~ bye the way how to DIY the tyre service?

4 door too mainstream.......

THIS!!!!! is the real gem......  
WRX STi 22B 424 units only. 2.2l but this model mostly in Japan... identical to Rally spec



Or this even rare WRX STi S201...300unit only but the looks a bit....but more power...

in short, the blm is now a plotong camlygaga. .
NVH very much better than the M3. Noise is still there but not as loud and currently it is still very much less rough (noise) compared to the M3.
Comfort is  probably due to soft sidewalls but its ok, I am not driving it.
Went to puchong using Kinrara haiway; goin there is hell but coming back is sweet due to them.

saturday fitted, sunday went to airport to pikap home minster.
good comfort but after MEX toll, turning down to Putrajaya stretch, forgot its a BLM without bars and the tyres are still new, the BLM sampan like hell 
question myself why it behave like that one konaring; later only realise I am not driving my FLX.

Those ecopias coupled with the BLM stock saspension, it can make me feel like driving a "plotong camlygaga" 
Now I actually like to drive the BLM more on weekends after driving the SE on weekdays fitted with 50kg bars, low profile tyres and stiffer saspension.

So I am happy with them if I consider the car as the car for my mom to go pasar/supermarket/shopping mall car.
And sometimes trip to Thailand.
It's gooding but the price if can closer to the nexens then its holymuthafarkerareyoufarkingkiddingme ?

u sell lower than ur cost price to me then bridgestone no tutup.
I hapi, bridgestone hapi, u and nexen no happy 

God tyres

lol ... maybe? Or maybe all recovering from world cup.

Guys, I need some advise here and would appreciate your feedback.

The latch for my glovebox broke. Now it's locked tight and can't be opened.

1) Any ideas how to open it? I have things I need inside there and will need it soon.

2) Is there anyway to repair this? Maybe just replace the latch and lock portion? Or do I have to replace the whole thing?

3) How much would it cost?

Just thought of sharing this



Very serious business indeed it seems.

Unless of course, it isn't all that,kuasa.

Oh and thanks to 2JayZ for showing an amazing launching system in the car, that almost killed the idiotic kenjilew whilst 7krpm suddenly upshift   I believe yours is the only car in the country got that launch function. Indeed interesting, and can use for drag event

4-2-1 Extractor
Bullet
New muffler
Iridium spark plugs
K&N Drop in air filter
Adjustable Fuel regulator
Oil Catch tank
F-tuned suspension
Pillowball mount
Adjustable cam gears
gauges ( vacuum, voltage, temperature etc )
Port & Polish

indeed it is quiet and comfy
kenjilew, it will be put to test when mama and papa goes for holiday in Hat Yai.