Case Modding FAQ
|
|
 Nov 8 2005, 07:21 PM
Return to original view | Post
#1
|
 
Senior Member
3,466 posts Joined: Jan 2003 From: PJ, Malaysia 
|
QUOTE(Acey @ Nov 8 2005, 05:17 PM) thanks for the info... just bought it this afternoon RM19... still need to work on my cutting skill hehehe some i cut until my hand lari and scratched the acrylic post some pix of the cutter will yah.... and where did u get it ??  |
|
|
Nov 9 2005, 09:29 AM
Return to original view | Post
#2
|
|
Senior Member
3,466 posts Joined: Jan 2003 From: PJ, Malaysia
|
QUOTE(bombman @ Nov 9 2005, 02:52 AM) Can get @ most hardware shops dude. Just ask for 'Plastic Cutter'.  |
|
|
Nov 9 2005, 10:41 AM
Return to original view | Post
#3
|
|
Senior Member
3,466 posts Joined: Jan 2003 From: PJ, Malaysia
|
QUOTE(MacDaNife @ Nov 9 2005, 10:19 AM) For thin acrylic (2mm) you can use the cutter. For thicker acrylic it's difficult to get a neat cut without power tools - jig or rotary saw. For circular cuts: you need a rotary tool or a drill/jig combination - drill a hole to insert the jig and with the jig on a slow speed ( to prevent the acrylic from excessive vibration) run the jigsaw around your pencilled circle. thanx for the reply...A steady hand is also required. that are the 2 things I dont have... 1. rotary saw and 2. steady hands.... ( always have problem drawing a straight line freehand ) Anyway, since I only need to cut a hole for the acrylic, and a hole does not need to be circular, I might cut to pix below using the cutter... that means getting a 2mm acrylic for the sidepanel.... 
Well, not really into doing it right now although I certainly have the time... |
| Change to: |  0.0132sec
 1.11
 7 queries
 GZIP Disabled
Time is now: 18th December 2025 - 02:16 PM |
Quote