Welcome Guest ( Log In | Register )

Bump Topic Add Reply RSS Feed

Outline · [ Standard ] · Linear+

 Case Modding FAQ

views
     
bobmarley
post Jun 4 2007, 11:20 PM

303M@R79Y
****
Senior Member
585 posts

Joined: May 2006
From: @@@TAIPING,PERAK@@@
QUOTE(karhoe @ Jun 4 2007, 10:55 PM)
Just some cheabo casing, im currently using a cheap ATX casing from my P3. Now planning to get somethign more decent with front USB and audio, since I put it on the floor and the port at the back is extreme hard to access.

I think the hardest part for me is to fix the front panel connector, USB, Audio, mic, hdd status, power status, on switch, reset switch
*
actually at some mobo already have write what cable to put connector right..?
or follow the instruction manual for mobo connector..if u dont have manual edy is difficult for connect back after u takeout d.. biggrin.gif
bobmarley
post Jun 4 2007, 11:32 PM

303M@R79Y
****
Senior Member
585 posts

Joined: May 2006
From: @@@TAIPING,PERAK@@@
QUOTE(karhoe @ Jun 4 2007, 11:24 PM)
For example, the front audio panel will have two pins, left and right, how do I know which is for which?

Certainly the manual did tell which pin is left channel, which pin is right channel, but how do I know which cable from the front panel is left and right channel?

Thanks
*
actually at wire connector have write something. if i not wrong the side have word is put outside. then no word is inside..sorry if i'm wrong.. notworthy.gif
bobmarley
post Jun 4 2007, 11:56 PM

303M@R79Y
****
Senior Member
585 posts

Joined: May 2006
From: @@@TAIPING,PERAK@@@
QUOTE(karhoe @ Jun 4 2007, 11:34 PM)
What does outside means? Left, right? Up down?

thanks
*
means is at mobo have a word write then the head connector have word also must same direction lo..if not function yet, u can try another side right? I think it is cannot make ur mobo spoilt coz u change the connector if u turn off ur pc & unplug it. is't true? biggrin.gif
bobmarley
post Jun 5 2007, 12:07 AM

303M@R79Y
****
Senior Member
585 posts

Joined: May 2006
From: @@@TAIPING,PERAK@@@
QUOTE(karhoe @ Jun 4 2007, 11:59 PM)
I don't really get you but anyway thanks for your help, I appreacite it. Wait till I get my casing then.
*
ok. i think after u get new casing u try first. if cannot came back ask k.. thumbup.gif
bobmarley
post Jun 5 2007, 01:30 AM

303M@R79Y
****
Senior Member
585 posts

Joined: May 2006
From: @@@TAIPING,PERAK@@@
QUOTE(karhoe @ Jun 5 2007, 12:10 AM)
Let's not talk about the front panel first.

The process of removing the motherboard, how do I start? Remove those studs that is between the board and the casing?

Sorry, this might sound noobish but I haven't try it before
*
must take out all connector before take out mobo. ok..
1st pull out all connector wire from mobo.
2nd pull out connector from hdd, cd-rom, floppy drive etc.
3rd take out all card from pci slot like agp, sound card, Netword card, etc.
4rd now take out screw from mobo, then mobo la..
lastly take out ur Psu only from casing..

Proc & HSF from mobo dont open la..k..

EDIT : TYPO

This post has been edited by bobmarley: Jun 5 2007, 01:32 AM
bobmarley
post Jun 5 2007, 01:39 AM

303M@R79Y
****
Senior Member
585 posts

Joined: May 2006
From: @@@TAIPING,PERAK@@@
QUOTE(budakdegilz @ Jun 5 2007, 01:35 AM)
for me... try and error... icon_rolleyes.gif
*
what do u means?
bobmarley
post Jun 7 2007, 12:46 AM

303M@R79Y
****
Senior Member
585 posts

Joined: May 2006
From: @@@TAIPING,PERAK@@@
QUOTE(Ryo @ Jun 6 2007, 03:51 AM)
i think he meant trial and error. try try try and finally u'll be good at it hehe.
and yea do it like what bobmarley says thumbup.gif
*
Thanks if i'm right..scare if my information is wrong.. biggrin.gif
Sometime i have take out from mobo if change a casing.. tongue.gif
bobmarley
post Jun 7 2007, 02:45 AM

303M@R79Y
****
Senior Member
585 posts

Joined: May 2006
From: @@@TAIPING,PERAK@@@
QUOTE(karhoe @ Jun 7 2007, 02:12 AM)
Thanks all of you, I managed to do it , everything is working perfectly !

Took me 3 hours, well, first time, what do you expect

Thanks again to everyone who guided me.

Added on June 7, 2007, 2:13 amI have tested everything on the front panel, ALL USB and audio seems to work, I havent test mic as I havent got one yet
*
Thats result we want hear from u...have nice day...
thumbup.gif thumbup.gif rclxms.gif

EDIT : TYPO

This post has been edited by bobmarley: Jun 7 2007, 02:46 AM
« Next Oldest · Casings and Modifications · Next Newest »
 

Add ReplyOptions
 

Change to:
| Lo-Fi Version
 0.0148sec    0.72    7 queries    GZIP Disabled
Time is now: 18th December 2025 - 07:05 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.