New user reporting in, got myself a Sigelei 20W + Kayfun 3.1 (No Idea on the functionality but the shop guy said he help me setup the whole thing. )

Didn't want to start on Starter Kits cause if I'm going to change it later, Why not get it now and stick with it for at least a year.

Any Otai's can get me up to date on the maintenance how to.

Thanks in advance to all Otai's who answers

This post has been edited by netherlord: Jul 17 2014, 12:05 PM

Yeah those stuff, steep learning curve for me coming from normal ciggs, need to start mess around the thing before i get anything right.

Any Do's and Don't i need to keep in mind when fiddling with it? The shop was closing at the time i got mine, so didn't get a good explanation on this product.

Daniyal is a local, his creation is called pop juice, not bad for local taste.

His shop is located at Sungai Besi, called Vapezone

diyblend.blogspot.com/?m=1

This post has been edited by netherlord: Jul 21 2014, 03:18 PM

I think it's best to bring your friend to a vape shop and see the products for him/her self cause preference is always an individual taste,

I'm sure if you do a search you can find some shop around but as for location preference, I think there is not much selection.

If you can't find any just drop me a pm and I might be able to help you out.

I'm also new btw.

Found myself some unbleached cotton at Muji Avenue K earlier, gonna try to re-wick my mod for a taste test




Attached thumbnail(s)

Yes at level 2, I think newly open add everything inside look new.

I'm looking for a place to do some vape gear shopping also,

In need of a good drip tip, using kayfun 3.1 clone tip and vari ant now. Looking for cherry vape type tip.

This post has been edited by netherlord: Jul 28 2014, 04:17 PM

I started vaping 3 week ago, 1st purchase was sigelei 20w + kayfun. Damage was RM450 (RM350 mod + RM100 for tank) + a lot freebies (4 10ml juices + 1 extra charger)

Upgrade in 2 week to Hana clone ori chip + Nautillus for RM720 (Hana custom vapour button + copper top)

Then bought sigelei sleeve for 26650 batt RM80 (batt included)

Now current setup is Sigelei + Nautillus for 2 day vaporing, Hana + Kayfun for coil and juice tinkering.

Yeah looking at stillaire dripper but I want to get a mech mod for sub ohm, now deciding between stingray and hammer

I like stingrays color but shiok hammer design..........

Hana DNA30 (Clone box, Ori Chip) + UD Aga T5 (1.2ohm build with unbleached cotton) / Sigelei 20W + 26650 sleeve + Nautilus Aspire (5ml Tank) (1.6ohm head coil) = 45ml per day (12h vaping time) weekday.

Weekend at least 50ml = 16h vaping time hahahahhaa

Tumpang tanya,

Vaperstuff is not a local company right? Do i contact the person listed on their facebook page for ordering or just order from the website?

Thanks for the info,

Will do some research on brewing before I take the plunge.

I have a Nautilus Tank and BVC coils from them and everything is fine.

Take note there are clone tanks and clone coils. These are *ahem* quality product selling at the same price of the Original

ALL Nautilus products have a security code sticker at the back. This allows to to check the authenticity of the product on their website.

Or you can go Le Gadgets and buy from them.

Ada lagi? If have reserve 1 Pack COD Puchong/LDP/Paradigm after 2.00PM, P.M Amount Pls

I'm from Puchong.

IMHO, T5 has better vapor production and less flavor compared to kayfun.

Been using the T5 for almost a month now, no complains in that, tank is bigger but juice consumption went up.

All in all, good performing atty.

Recommend to try if you want an alternative to kayfun or taifun

Got the T5 for RM120 but to me worth every dollar

Most important is how you build and wick that sucker,

Low ohm plus thick wicking = more vapor less taste

Medium ohm plus normal wicking = 50 / 50

High ohm plus normal wicking = more taste less vapor

My lowest ohm on this atty is 0.6 and it performed like a dripper, highest is 1.8 and its like a kayfun.

Very versatile little beast but treat her wrong, she might leak all over you haha.

Heard some not so good reviews of IPV2.

QC is lacking and malfunctions on touch sensor.

Search PBusardo ipv2 on YouTube, this guy is very clear on his review

The only stable platform for regulated devices available in malaysia AFAIK is DNA30, SX200, SX300, SX330 and SX350

SX330 is the Sigelei 100w box mod, SX350 is custom box

Anything with Dna30 original chip from a reputable modder is more or less stable enough to be a daily driver.

We are spoiled for box mod choices and basically those are aesthetic preference.

Most important is the guts of the device.