Great bass from external speakers or earphone?

both external and earphone... it depends on your music itself and sound format files... you can change the bass bold sound by yourself by manual edit the param.bin file on moto sound software.

how 2 start 2 mod the motorola e398..?i'm noob here..

first must have all the accessories for mod like phone usb cable, PST software or Flashbackup (can find on www.e398mod.com), P2KTools, enough battery ('coz if the battery is not full it won't let you to flash via cable).

Start to backup everything important files on the phone in Flashbackup and P2KTools. Do Full backup at first, then PDS backup and boot loader backup. Find the firmware 42R_for_all_with_CG7 on www.e398mod.com or motomodders.com.

Install PST software on your pc and open the folder where you save that file. Find and open the MultiFlashFlex.exe file. (You can use Flashbackup software if you don't want to use PST software.) On the preferences, first and second box should checked. Should check enable flash and browse the folder where the 42R_for_all file you saved before.. Start to flash... (But before proceed you must make sure the connection between your phone and pc connected already. If your PC don't detect your phone and have no driver to install find the file "PST driver 7.0 in www.e398mod.com). you'll find that your phone in bootloader mode. Don't touch your phone and let it to finish first. After that you'll see that your phone in SW upgrade mode. It takes around 10 minutes to finish.

After finish, find some cool Monsterpack either in motomodders.com, e398mod.com or everywhere. You can choose between 4XR, 6XR or 7XR firmware upgrade. Unpack your monsterpack. There will be *.shx file will be use for flash. Start from their main flash file first, if got DSP or another thing let it be second or third to flash. Repeat the same procedure for flash as above on how to flash the monsterpack. Your phone will be autorestart after flash finish. If not try to manual start by yourself. If there's nothing appear on the screen when you try to start your phone by manual, whether you miss something out to flash. You can try to bootload your phone to flash another file. Press *#ON/OFF (red) button or take your battery out while let your battery in, press * & # button.

Good luck! If there's something missing ask me again.. lol

This post has been edited by kInOzAwA: Jan 20 2007, 09:12 PM

thanks 4 helping

This post has been edited by adrianzz: Jan 20 2007, 09:33 PM

no problem dude

a full batt can last abt 10-15 full MP flashes

i tested it be4 lol

earlier this morning i'm already suffer battery wasn't full then i got stuck on the bootloader itself. But luckily i got external charger. I have patch the bib pix to that 42R firmware.. mixed them with 46R DSP, digital signature... and then flash... but it's stuck because not enought battery... and then fail.. cannot on hp already.. but luckily can bootup using bootloader...

Hmmm......... I've been experimenting with paramtable.bin and it only increases the vibration when I play music from the external speakers.It seems that the earphone bass isn't increased.

can the ring tone of tis phone changed 2 mp3?

not just mp3, u can also make aac (m4a) files as ringtones...

*looks at signature*

u bought ur e398 di?

Yes..but must upload to phone 1st..still can't figure why can't mp3 from memory card be use as ringtones

aac better for me

p/s:can anyone link me to some cool games for e398..my mp don't have any games...

This post has been edited by aliftaufiq: Jan 21 2007, 02:04 PM

no actualy tis phone is my bro give..tis phone is great..the vibration is very strong..i love it.2 bad my 1 don hav video recorder.

got 1 fw can record video wor.. forgot wut fw liau.. i think also got itunes de..

*man i suck in fw thinggy...*

erkk how do you adjust the paramtable.bin? i have very bold bass.. quite louder than Sony Ericsson Walkman. On the bass tremble vibration on 1 &2 set to 0. While bass tremble vibration off 1 & 2 set to 248. Edit gain table.bin.. On the wired headset mp3/midi/video settings wired headset up the volume to 2/3. Wired headset bass tremble gain mp3 settings... for ultra louder bass sound set to 8 or 10. For mid bass set between 4-6. tell me if there's nothing change on your earphone. I have very good bass and tremble when using earphone.. more loud and cool than my N70 music edition and some SE walkman phone. My friend were jealousy with this phone now... hehe

yes.. not just mp3. you can set to m4a/mp4 format also lo..

This post has been edited by kInOzAwA: Jan 21 2007, 06:10 PM

you should upgrade to R373 firmware to have video recorder and cool itunes program... I'm using the R373 version 42R with Back In Black monsterpack including the boot screen also changed to BIB.. I'm using Back In Black monsterpack with 46R version before but used a lot of battery power... Now it have better sounds and save my battery also.. but it's a big lag if compared to 46R.

4xR, 6xR & 7xR firmware version...

This post has been edited by kInOzAwA: Jan 21 2007, 06:12 PM

wow..

it is good to know still got new moder joining here

anyone knows which is the coolest DSP? is it affect music sound, music format?
Now i'm using 623BAB00 version. Before this i'm using the 6235A500 and another two which i forgot which one version. Anyone can recommend me the best DSP of all?


tyenfei: which is the best firmware you have used before?

This post has been edited by kInOzAwA: Jan 21 2007, 10:11 PM

wow... so long time din flash moto phone adi

i am scotting any 2nd hand e398 that below RM300
miss the flashing memory

so wt;s the lastest thing in the latest firmware
i sawa form chinese web got new mp3 player with lyrics running