2nd at 1st page

This post has been edited by ngeo88: Jun 6 2014, 02:54 PM

newbies here, wanna ask sifu how long should i change PE absorber and coil spring ? is PE original absorbers are Kayaba ?

mine 75k aldy, is proride good, it is more to sport abs or comfy abs ?

fark, yesterday afternoon my car get hit from behind, and the white colour Previa run away when i drive to road side



i cannot see the car number plate because it was raining

it happen when i brake hard on a congested road to give way for the kancil from left to my lane....., because that time was heavy rain and i just reach the kancil right blind spot suddenly the kancil wanna move in my lane so i had to press brake but not emergency brake just few deep brake to slow my car the farker behind is not too far from me but it still hit my car bahmmm all my things inside car scatter around, i dun heard any tire brake from behind so i assume he not aware or maybe the road is wet so no tire braking sound.

my original bumper crack


number plate broken, the rear bonnet still can open and close but the latching lock not as smooth as before


several paint chip off around the middle part of the bumper


can see the bumper clip hole offset, it means the collision beam inside aldy GG


luckily all tail lamp still function but the reverse sensor sensing range abit wired the sensing distance like shorten than before.

Now i scare the others parts damage but i cannot see exp: fuel line or fuel tank, rear wheel arm assembly and brakes.

This post has been edited by ngeo88: Aug 4 2014, 06:25 PM

u dun say,

this is proton car u know

so new PE SV using IAFM+ ?

haiz so long time i get this car can't even keep it in perfect shape for at least 5 year pitty lar ~~~~ i wash the car my self every week, u know damm heart pain to see this .......

u ada see inside the beam or not how was it ? do u change the beam inside or u just change the bumper ? tell me more pls.

i dun even know the plate number claim habuk lar~~
btw how much is the bumper + paint + labour ?

This post has been edited by ngeo88: Aug 5 2014, 04:01 PM

few hundred include paint ????? where u repair worh

my experience NBP max is 2 year yes and it burst just in time 2 years my left and right NBP bulb die just in 2 week different , now trying Phillips Xtream vision

dunk buttsack ppl , drive carefully

me also have but i buy touch up pain diy only

This post has been edited by ngeo88: Aug 13 2014, 02:25 PM

check at thier web side got selection there http://sanwonventure.com/
it say 18"/20"

just fill in the form and they will contact u then u can tell them bring few size, the price include install at your place.

no major dents just very small at the wheel fender edge, my scratch longer until the door, i just polish it up and use touch up paint to cover, 2 layer colour 1 layer clear coat, 20min under hot sun for each layer to dry before apply the next layer the tiny hairline scratch actually no need colour paint just apply one layer clear coat it was gone.

due to i use parliah touch up paint (because can't find bronze garnet few years ago when i buy, now aldy got bronze garnet for all brand) so the colour will look different only if u see it closely, but if just look from far away it was perfect.

sorry no time to take photo, this few month like i never see the sun go to work earl morning before sun rise go home only after sun set. weekend or holiday = sleep

This post has been edited by ngeo88: Aug 18 2014, 09:17 PM

any one try new formula Petronas Ron95, i use 1/2 tank feel it was good improvement than last Petronas Ron95, now Petronas can use at Campro engine liao.

This post has been edited by ngeo88: Oct 14 2014, 09:33 PM

just now after raining and stuck in 1 hr traffic jam then stop for dinner my PE cannot start any more
fuel pump, battery, crank motor all ok then after few try cannot crank anymore.

Mechanic come check using computer found my car immobiliser lock the cranking, he then reset the immobiliser the car can crank back but still engine not run.... found because the plug no spark out.

he suspect one of my crank position sensor problem but he dunno the top or the bottom one, search google show that 1 sensor cost RM380 .....die i'm gonna pokai like that, now my car over night at workshop.

any one has simmilar problem or not please share so tomorrow i won get chooped, and what cause the crank sensor problem ? i remember just now i crank the engine before it run i turn off the key then i crank again does it case the sensor miss position, can it be reset back to the position with out change the sensor.

night time also can call him meh ?

After the check it actually all my fault

1st

PE immobilizer actually come with auto disable cranking function, which means if some one trying to crank the car more than the setting (i'm not sure how many) but engine not run it will activate "crank cut " this is why i can crank the car until suddenly no more function like battery flat.

2nd

the problem of i can't start the engine is i turn the key too fast (suspect) straight away to crank without stop a second at the Key "ON" position, when the ECU not fully getting feed back from its sensor, the engine crank is turning this make my ECU think the cranking sensor miss-position hence it cut off the firing spark signal to protect the engine from broken, this is why after the mechanic reset the ECU immobilizer, the car come back to crank but still engine not run he then found spark plug no firing.

now up to this point i leave the car at work shop for him to check, base on what he told me he dismental all the 3 sensor (2 crank position up and down, + the CO2 at catcon) resistance ohm ok means the sensor are ok no need to replace, then he reset the ECU firmware ( not sure is reflush or reset ) he said he aldy reset every thing so the car is ok engine is come back normal.

now i worried he also turn off all my immobilizer so my car no more protection.
This computer diagnosis include labor plus his worker late night push my car back to work shop and send me back to office / fetch me to take car at work shop RM200

This post has been edited by ngeo88: Nov 3 2014, 09:19 PM

yup, will test it together with my spare key