After the latest firmware update, I'm unable to get internet. How to fix

Dammit. Anyway to fix? How to get to vlan tagging page?

Just wanna ask; this modem can be use to Streamyx?

How to reflash. Teach me masterrrr

Anyone updated their firmware to V2.10?
http://www.dlink.com.my/securityadvisory-msia/

After updated to 2.09, noticed that Whatsapp send out message sometimes will delay.. 

By the way, order new router to replace this shitty router.. 

TP-Link Archer C9 

Hey guys i updated to the retail firmware 2.10. I tried to downgrade it to 2.08 TM but it says failed. How do i fix this?

i use dlink recovery mode to re-flash 2.08TM, since the usual interface only allows upgrade

i learned from this site : http://forums.dlink.com/index.php?topic=44909.0

preparation :
-download 2.08TM firmware on your computer
-connect your computer to router using LAN cable
-set your computer's ethernet ip to static ip 192.168.0.2

assess recovery mode :
-power off your router
-use a pin ( or something similar) and poke/press the reset button
-while hold-press the reset button for 3-5 seconds, press the power button while hold-press the reset button until you see the power indicator is in amber colour and blinking ( now router is in recovery mode )

re-flash 2.08TM firmware
-on your computer, open up browser and login to 192.168.0.1
-it will show Dlink Recovery mode
-click select to choose the 2.08TM firmware, and then click upload
-wait until the process finish, it will autorestart
-check the version, it should say 2.08TM 

setup unifi and wifi settings
-since the router is reset, all settings are lost
-you will need to re-enter all unifi settings and personal settings again.

It worked for me, i hoped it works for you

May I know where to download 2.08TM version? I dont want retail firmware.
I cant upgrade using its own updater. Everytime I press "check for new firmware", no response at all

How to set ethernet?

Dont worry, you're not alone. Im using C7 too. C7 performs best via wired connection. When comes to wirelress, even the 5ghz signal keeps disconnected and shift to 2.4ghz. I suspect this has to be done with the firmware. However, I never face internet disconnection when using this router.

TM has just released the new firmware update for D-Link DIR-850L router.

Should we upgrade?

https://www.tm.com.my/OnlineHelp/Announceme...FI-ROUTER-.aspx

It is relieved i didn't receive the dlink dir850 router. I flashed my current c1200 with aus firmware. escaped from the suffix "@unifi" thing.

A little update. Just changed my router from Dlink DIR-850L (AC1200) to Tplink Archer C2 (AC750). I know the Tplink is an older model (and slower total throughput in Wi-fi) but now I can connect to TM IPv6 and maintain stable IPv6 connection even with Google IPv6 DNS. I couldnt do this with the Dlink. Signal strength from the Tplink is better due to its external antenna (Dlink only internal). Very happy with the Tplink.
Now i'm in dilemma in choosing Tplink vs Dlink switches for my new home. 16 ports Cat6 in total. 24 ports Tplink switch is cheaper a bit compared to 24 ports Dlink. Review-wise, many people use Dlink. Any idea? Both fanless. Pls dont suggest Cisco as they are very expensive. Only unmanaged switch needed.
Correction on my previous posts, 10Gbe switch are still very expensive and I'm postponing the idea of having 10Gbe connection for future.

Yes, I realized that before purchased the C2. I don't have plan to use the wifi (I already disable the wifi, plus, I'm quite happy with all the features and speed of its web interface). The router is connected to a 24 switch and other access points will take care the wifi. Why I'm doing this? Because my modem and router is located inside a room where the main communications line (phone and tm fibre) comes in and 16 CAT6 will cater the whole house LAN, wifi and even phone line. I don't want to have the modem, router beside my TV. BTW, thanks.

Thanks too about the advice on the switch. I bought TP-LINK, the desktop/rack version, as it is the only model available here in my place. It comes with bracket for me to mount to my 19" network rack.

So sorry OP, I kind of distracted the purpose of this thread. Let us continue to discuss about the DIR-850L? Anyone managed to get IPv6 with the latest firmware? I couldn't. With the TP-LINK, I can (refer to the attached image)[attachmentid=9419578]

my personal review on the dlink dir850l.

you can read to my review here

cc: SilentVampire bro

If I were to hard reset the router, would I have to reconfigure it in order to be compatible with unifi?

My router can't connect to the internet and I cant access the router via 192.168.0.1 anymore

dear all sifu, why my phone or laptop cannot scan 5ghz ssid?
is my router wifi setting wrong?

No. my device got 5ghz capabilities.
My phone is mate 10 pro. I can get connect to my office wifi 5ghz but not this 850L

My 850L still using the old firmware 2.08, don't like the SSID with "@unifi". So far no issue at all.