Unifi dlink DIR-850L unifi firmware, firmware that support unifi
|
|
 Sep 23 2017, 11:10 PM
Return to original view | Post
#1
|
 
Junior Member
490 posts Joined: Aug 2006  
|
retail firmware seem to not support unifi-pppoe (on the 850L with TM logo) for me, i can see it as an option but i can't save it. Every reboot, it keep default back to pppoe.
Assessing the dlink interface with my phone doesn't show unifi-pppoe option at all. Reflash 2.08TM firmware and everything works again. Gonna wait for TM version of the latest firmware. |
|
|
|
|
|
Sep 23 2017, 11:24 PM
Return to original view | Post
#2
|
|
Junior Member
490 posts Joined: Aug 2006
|
QUOTE(anoobist @ Sep 23 2017, 11:12 PM) How to reflash. Teach me masterrrr i use dlink recovery mode to re-flash 2.08TM, since the usual interface only allows upgrade  i learned from this site : http://forums.dlink.com/index.php?topic=44909.0 preparation : -download 2.08TM firmware on your computer -connect your computer to router using LAN cable -set your computer's ethernet ip to static ip 192.168.0.2 assess recovery mode : -power off your router -use a pin ( or something similar) and poke/press the reset button -while hold-press the reset button for 3-5 seconds, press the power button while hold-press the reset button until you see the power indicator is in amber colour and blinking ( now router is in recovery mode ) re-flash 2.08TM firmware -on your computer, open up browser and login to 192.168.0.1 -it will show Dlink Recovery mode -click select to choose the 2.08TM firmware, and then click upload -wait until the process finish, it will autorestart -check the version, it should say 2.08TM  setup unifi and wifi settings -since the router is reset, all settings are lost -you will need to re-enter all unifi settings and personal settings again. It worked for me, i hoped it works for you  -------------------------------------------------------------------------------------------------------------------------------------------- QUOTE(vamfire @ Sep 23 2017, 11:16 PM) Wah? U guys even the settings cannot save? So nice, my router i reset also can't connect to internet What browser did u guys use? I use chrome browser and it works fine, I remembered reading somewhere that other browser might cause that save issue... And, it's best practice after flashing the firmware, reset the router to factory default settings, I encountered no internet also at first but after done that, set everything again, now all good except the things i mentioned b4...   This post has been edited by Eterman: Sep 23 2017, 11:27 PM |
|
|
Oct 11 2017, 11:14 AM
Return to original view | Post
#3
|
|
Junior Member
490 posts Joined: Aug 2006
|
i downloaded the new 2.09TM firmware, in the zip there are 2 firmware, which one should i use?
The guide seem to only mention using the middle.bin only. |
|
|
Oct 11 2017, 12:02 PM
Return to original view | Post
#4
|
|
Junior Member
490 posts Joined: Aug 2006
|
QUOTE(klckm88 @ Oct 11 2017, 11:54 AM) I was on 2.07TM,download the firmware,update the 2.08middle.bin first,then will updated to 2.08TM, my dlink is by default on 2.08TM firmware, so i just need to use 2.09TM firmware? no need for 2.08TM middle bin ?after that update again with 2.09 one |
|
|
Oct 16 2017, 09:34 PM
Return to original view | Post
#5
|
|
Junior Member
490 posts Joined: Aug 2006
|
QUOTE(wilsonyong8850 @ Oct 16 2017, 06:47 PM) Thanks bro, it helps a lot! Manage to flash back to the older firmware and then flash to the newest one. Currently everything was good! Glad it worked for you bro  |
|
|
May 18 2019, 11:44 AM
Return to original view | Post
#6
|
|
Junior Member
490 posts Joined: Aug 2006
|
QUOTE(Al'Diabalos @ May 17 2019, 09:56 PM) I disable TM TR143  QUOTE(socratesman @ May 18 2019, 10:39 AM) can't remember if it's called TR-069 or TR-143, but if i see this kind of sh*t i always disable it Helps to avoid being auto-upgraded against your will |
| Change to: |  0.0252sec
 0.47
 7 queries
 GZIP Disabled
Time is now: 2nd December 2025 - 05:15 AM |
Quote