Update is available, check it out. B108 to B110




Attached thumbnail(s)

Later i can share with you the firmware, then you may install from SD card.

Download, extract file, then copy update.zip to root of SD card and flash from stock recovery.

http://www.mediafire.com/download/x5veqnkc...B110_Update.rar

This post has been edited by cvg: May 31 2014, 03:45 PM

Even you have dump the ROM, you cannot flash it with SP Flash Tool, Malaysia version 3C only recognized signed image from factory ROM. Also you need to use SP Flash Tool version v3.1324.0.177 (Secboot), other version are not going to work.

Unless your flash tool can write the EMMC bit by bit from the dumped image.

For Malaysian H3C, only SP Flash Tool version v3.1324.0.177 (Secboot) can be use, and only signed images of the factory firmware can be flash.

Also 3rd party recovery, no matter CWM, TWRP or Philz will brick Malaysian H3C. Only sign recovery image of the same version will unbrick the phone. For example, B108 and B110 recovery image are different, if you flash B108 recovery image to B110 version phone will cause it to brick, or vice versa.

Therefore, you may play with China version (aka AP), but not Malaysian version. Just use it as it is.

This post has been edited by cvg: Jun 3 2014, 12:32 PM

Try flash the following recovery with flash tool, this is official signed recovery image from B108 ROM.

B108 Recovery > http://www.mediafire.com/download/9ab918o1...covery-sign.rar

SP Flash Tool v3.1324.0.177 (Secboot) > http://www.mediafire.com/download/aa577ali...177_Secboot.rar



This post has been edited by cvg: Jun 3 2014, 12:47 PM

Have you try the method stated in post 858 ?

Did you flash Taiwan ROM, after double wipe and restart, please share screen shot of the system version in about phone. Thanks

Did you flash Taiwan ROM, after double wipe and restart, please share screen shot of the system version in about phone. Thanks

-deleted-

This post has been edited by cvg: Jun 3 2014, 03:55 PM

I suspect the Taiwan ROM is identical to Malaysian ROM. If you have not do the double wipe, please share a screenshot of the ROM version before and after double wipe.

If the ROM is identical, then the Custom version will CUSTC470D001

If they are not the same, then Taiwan ROM will be CUSTC428D001

In any case, I can help you to revive to Malaysia official version.

This post has been edited by cvg: Jun 3 2014, 03:27 PM

Good, Update.app is full ROM for SD card flashing, it is not a firmware update package.

This post has been edited by cvg: Jun 3 2014, 03:53 PM

Next thing to test, please try and see if it is possible to update to B110 via OTA?

There are many misleading tutorial on the net, while the procedure will work on China version phone (aka AP), doing the same on Malaysia version H3C will lead you into hard times.

This post has been edited by cvg: Jun 4 2014, 08:54 AM

Not save!

If yours is China version （AP set）, you can try China, Taiwan or Malaysia ROM provided you backup the NVRAM (IMEI) for restoration purpose.

Flashing CHN or MIUI rom (and 3rd party recovery) onto Malaysian set will brick the phone.

ericmaxman

Below are some resources to help revive a bricked Honor 3C, Malaysian version. China set (aka AP) don't use.

A. First refer this document for complete flashing guide: http://www.mediafire.com/view/83pe2l8ue63x...pdate_Guide.doc

Then download tool, drivers and firmware files from links below:

1. SP Flash Tool v3.1324.0.177 (Secboot): http://www.mediafire.com/download/aa577ali...177_Secboot.rar

2. Driver for Service-2012-11-27: http://www.mediafire.com/download/6c36vsuc...-2012-11-27.rar

3. USB Vcom 1.1236.00 Driver: http://www.mediafire.com/download/j5d83m1r..._v1.1236.00.rar

4. Full ROM H30-U10 V100R001C900B108 : http://depositfiles.com/files/k04pdf2fk



B. If phone is bricked due to flashing a 3rd party recovery, it can be restore by flashing back the stock recovery signed image: (Full ROM above also contain the following files):

5. Recovery image (V100R001C900B108): http://www.mediafire.com/download/9ab918o1...covery-sign.rar

6. MT6582_Android_scatter.txt: http://www.mediafire.com/view/q92j4osoyskn...oid_scatter.txt



C. Force flashing using SD card:
Download ROM (update.app) and file "au_temp.cfg", put both files into a folder "dload" then copy to the root of a SD card (format with FAT32). The SD card contents:

\dload\update.app
\dload\au_temp.cfg

Insert SD card into phone and put in battery (at least 30% power) , then press Power button to start flashing process, wait until process complete and phone reboot.

7. V100R001C900B108 ROM (update.app): http://depositfiles.com/files/42jot28kf or Here

8. au_temp.cfg: http://www.mediafire.com/download/8e54f7yr...rpw/au_temp.cfg


Disclaimer: I only share the above resources and will not be responsible for any consequences with your phone and yourself for using the files and information above. Flash at your own risk and I cannot guarantee your success.

This post has been edited by cvg: Jun 7 2014, 08:12 PM

The resources already given Here

Item no. 4 it is.

one unit white to let go in unopened vmall box at 499. pls pm.