dun flash 3rd recovery!!! it will brick the phone..
I tested MIUI tutorial step... it cannot work..

i have successful flash MIUI ROM, need to go to any China ROM (Stable Version) after that flash CWM then Factory reset then flash MIUI.

Remember to always backup IMEI/NVRAM to be able to restore after flashing different ROM especially China ROM

Yup, stable at least for me..camera, wifi, sound and others work perfectly except you need to install google keyboard for english. steps 1st if ur on B108 you need to go China Stable ROM (B137) or (B123). Vroot to backup your Current ROM and IMEI. Load dload folder (China ROM) to SD Card. Update thru Settings > Update > Local. System will restart and flash rom. After that restore IMEI (must be in root mode) up until u can get Network or SIM detected.

After that do factory reset thru backup and reset to clean up and restart. if not rooted root again and use MobileUncle to flash CWM recovery. Copy MIUI rom to SD Card and Google Apps.zip, restart to recovery (Power + Vol Up). Choose wipe data/factory reset and wipe cache. After flash MIUI ROM and restart.

load scatter file and press download, connect ur phone without battery

make sure have Mediatek USB VCOM Driver loaded

Even you have dump the ROM, you cannot flash it with SP Flash Tool, Malaysia version 3C only recognized signed image from factory ROM. Also you need to use SP Flash Tool version v3.1324.0.177 (Secboot), other version are not going to work.

Unless your flash tool can write the EMMC bit by bit from the dumped image.

Try flash the following recovery with flash tool, this is official signed recovery image from B108 ROM.

B108 Recovery >  http://www.mediafire.com/download/9ab918o1...covery-sign.rar

SP Flash Tool v3.1324.0.177 (Secboot) > http://www.mediafire.com/download/aa577ali...177_Secboot.rar

Did you flash Taiwan ROM, after double wipe and restart, please share screen shot of the system version in about phone. Thanks

Just found out that the Honor 3c does not support Flac audio files.

ericmaxman

Below are some resources to help revive a bricked Honor 3C, Malaysian version. China set (aka AP) don't use.

A. First refer this document for complete flashing guide:  http://www.mediafire.com/view/83pe2l8ue63x...pdate_Guide.doc

Then download tool, drivers and firmware files from links below:

1. SP Flash Tool v3.1324.0.177 (Secboot):  http://www.mediafire.com/download/aa577ali...177_Secboot.rar 

2. Driver for Service-2012-11-27:  http://www.mediafire.com/download/6c36vsuc...-2012-11-27.rar

3. USB Vcom 1.1236.00 Driver:  http://www.mediafire.com/download/j5d83m1r..._v1.1236.00.rar

4. Full ROM H30-U10 V100R001C900B108 :  http://depositfiles.com/files/k04pdf2fk
B. If phone is bricked due to flashing a 3rd party recovery, it can be restore by flashing back the stock recovery signed image: (Full ROM above also contain the following files):

5. Recovery image (V100R001C900B108):  http://www.mediafire.com/download/9ab918o1...covery-sign.rar

6. MT6582_Android_scatter.txt: http://www.mediafire.com/view/q92j4osoyskn...oid_scatter.txt
C. Force flashing using SD card:
Download ROM (update.app) and file "au_temp.cfg", put both files into a folder "dload" then copy to the root of a SD card (format with FAT32). The SD card contents:

\dload\update.app
\dload\au_temp.cfg

Insert SD card into phone and put in battery (at least 30% power) , then press Power button to start flashing process, wait until process complete and phone reboot.

V100R001C900B108 ROM (update.app):  http://depositfiles.com/files/8agcj9o4a  or    Here

au_temp.cfg:  http://www.mediafire.com/download/8e54f7yr...rpw/au_temp.cfg
Disclaimer: I only share the above resources and will not be responsible for any consequences with your phone and yourself for using the files and information above.