guys...pls guide me how to play animal crossing using Dlink Airplus G+ wireless router..

with the service of streamyx...

thanx in adance

maybe this thread can help..

http://forum.lowyat.net/index.php?showtopic=219409

15 pages....... haih..... is it just open up my firewall setting... can i specify which port i can open?...

Be more specific.

does your NDS detects the d-link router ?

a few points to pay attention to:

1. in the wifi connection settings, can your ds detect your wireless network?

2. if yes, the wifi settings will test your connection to see if it can connect. does it succeed?

3. if no, try editing the wifi profile, and turn off "obtain ip address automatically", and put in the IP, subnet mask, gateway IP manually. try the test again.

4. if that still fails, get into your router settings, and DMZ your ds.

5. and if that still fails, go into your wireless settings on your router, and set the transmit rate to 1/2Mbps.

this is usually set to "auto", and it will automatically adjust to the ds that uses 1/2Mbps only, but i've had experience with some wireless access points freaking out and refusing to let the ds through unless i set it to 1/2Mbps manually.

my wifi connection can detect the Dlink router... the problem is when testing connection is come with error code 52000... i'll try the DMZ method and transmite rate to 1/2 mbps...thanx nub...

try manaul ip setting on nds lite and the router.

this happen to me when I try to hook up my 3com router.

my nds lite detects my 3 com modem. however the router has already givin an ip (by dhcp )

so I set my router with that IP fix on my NDS lite.

and I have to set manually IP (which given by the router) in order to go online..

wierd... haha but it works.. (for me though)

djinn: exactly. the most common problems i've run into are either something with the DHCP(thus having to manually set up a static IP address) or the transmit rate(though setting it to 1/2mbps makes your lan a lot slower). check those two first, before DMZing your ds. modern routers are rarely THAT strict as to block the ports that the ds uses.

For some routers, you may have to enter the DSes Hardware MAC address manually into the router configuration. You can find the DS MAC address in the Network settings page on the DS.

1.) Wireless Security - No security is the best
2.) MAC Filter is ON or OFF, ON, then add DS MAC to router
3.) Manual set the IP, Gateway, and DNS
4.) Enabling UPnP <--- not sure it would help

mitodna

hi, can anyone help me out,its my first time when I try to connect to get a friend code (AC:WW), after the connectoin settings, when I test the connection it gives out the result

Error Code : 52100

Connected to access pont but unable to connect to the server.......

Can anyone please help me..