guys ddr II 553 512mb can be used ornot on e6300?
Intel® Core(tm)2 Duo Overclocking Board, Report your issues/results here.
Intel® Core(tm)2 Duo Overclocking Board, Report your issues/results here.
|
|
Aug 19 2006, 11:41 AM
Return to original view | Post
#1
|
![]() ![]() ![]() ![]()
Senior Member
548 posts Joined: Sep 2005 |
guys ddr II 553 512mb can be used ornot on e6300?
|
|
|
|
|
|
Aug 23 2006, 11:15 PM
Return to original view | Post
#2
|
![]() ![]() ![]() ![]()
Senior Member
548 posts Joined: Sep 2005 |
eh conroe Rig normal use how much PSU true power enuf?
if power logc 450 pure enuf to tahan? if overclock in future wat the recommend pls advice guys |
|
|
Sep 1 2006, 04:16 PM
Return to original view | Post
#3
|
![]() ![]() ![]() ![]()
Senior Member
548 posts Joined: Sep 2005 |
gigabyte come out 945 chipset mobo for core 2
how mch diff it compare with 965? as i notice the diff is becuz of the ram speed supported only |
|
|
Sep 2 2006, 05:15 PM
Return to original view | Post
#4
|
![]() ![]() ![]() ![]()
Senior Member
548 posts Joined: Sep 2005 |
hi guys i got DS3 board and DDR2 800 mushkin
how to make it show ddr2800? do i need to overclock my FSB to 400? heard lot say is 1:1 ratio so is like how mch only if buy ddr 2 800 ma wasted?? |
|
|
Sep 3 2006, 11:49 PM
Return to original view | Post
#5
|
![]() ![]() ![]() ![]()
Senior Member
548 posts Joined: Sep 2005 |
lookin to buy e6700 or e6800 can pm me
|
|
|
Sep 4 2006, 01:29 AM
Return to original view | Post
#6
|
![]() ![]() ![]() ![]()
Senior Member
548 posts Joined: Sep 2005 |
x6800
hey guys need some helps on overclock i using DDR 2 800 5-5-5-12 timing ram Giga DS3 F4 E6300 X300 128bit 128mb pciex i have disable legacy usb,serial,paralle, disable from line CI1 till Vtechnology(BTW what each feature does? after i disable my vcore up from 1.2 ->1.34 and internal temp also up to 48 celcius p/s : i only disable havent overclcok anytin yet) then i trying first attempt increase FSB to 333 memory system optimizer set to 2.0 PCI Express set at 100 then end up i cant boot up my board can is jst use easy tune 5 to overclock what the diff with overclock in bios? what did i misss?????????\ joinin world of OC now hehe This post has been edited by benlaw: Sep 4 2006, 01:53 AM |
|
|
|
|
|
Sep 4 2006, 04:21 PM
Return to original view | Post
#7
|
![]() ![]() ![]() ![]()
Senior Member
548 posts Joined: Sep 2005 |
graphic card will affect the overclock status?
i using x300 pciex graphic card why set fsb to 333 it'll black out |
|
|
Sep 4 2006, 09:34 PM
Return to original view | Post
#8
|
![]() ![]() ![]() ![]()
Senior Member
548 posts Joined: Sep 2005 |
expert how how?
my ram timin 5-5-5-12 ddr2 800 i think that the most c an do so i dun need touch that now how should i up it seem graphic card/ram will block my overclock |
|
|
Sep 6 2006, 09:13 PM
Return to original view | Post
#9
|
![]() ![]() ![]() ![]()
Senior Member
548 posts Joined: Sep 2005 |
what did i miss?
row from CPUIE disable till VTech disable legacy usb/serial/parallel port dimm voltage +0.2 mh voltage +0.2 timing 5-5-5-12 set to fast mood pcie 100 multiplier set to 300 FSB can run but faied when run calcuation /prime show window popup error sometitme other feature remain ssame using e6300+ds3+ddr2 800 mushkin i put slot 1 ram & slot 3 should be runnin dual channel rite as it say dual channel interleave (wat this mean) how can have a stable pc ????????? |
|
Topic ClosedOptions
|
| Change to: | 0.0495sec
0.27
7 queries
GZIP Disabled
Time is now: 2nd December 2025 - 01:59 AM |