haiz this is my Core 2 Duo E6300 1.86Ghz overclock result, erm, too sad... No good RAM to oc, I will do this better as soon as posibble.

Overclock System:

C2D E6300 1.86Ghz @ 3.325Ghz @ Intel Factory Original Stock Cooling @ 1.425v
Gigabyte D965-DS3
KVR DDR2 533 1GB * 2 (Hynix Chip) - Dual Channel ~DDR2 950 CL 4 - 4 - 4 - 9 ~ 2.2v
Power Logic Atrix 600T PSU
Galaxy 7300GT DDR3 128MB 1st batch

The result....

Now my current Super PI 1M @ E6300 is 17.063s

This post has been edited by Jian_yi: Aug 18 2006, 07:58 PM


Attached thumbnail(s)

This is same configure system, but RAM CL Latancy value using 5 - 5 - 5 - 9.

See picture:


Attached thumbnail(s)

I dun't know ler, have any different at Hynix KVR DDR2 667?!

This is Conroe E6700 ES overclocking result, it's seem like the processor no overclockable, can't reach higher Mhz, even I have been setting at 1.575v, also can't boot to windows. haiz...

Overclock System:

C2D Conroe E6700 2.66Ghz @ 3.650Ghz @ Intel Factory Original Stock Cooling @ 1.550v
Gigabyte D965-DS3
Corsair XMS2 512MB *2 REV5.7 DDR2 675 (4-4-4-12) Dual Channel @ DDR2 730 ~ 5 - 6 - 6 - 18 ~ 2.1v
Power Logic Atrix 600T PSU
Galaxy 7300GT DDR3 128MB 1st batch

See picture... No good result, because suck Conroe ES!

This post has been edited by Jian_yi: Aug 18 2006, 07:59 PM


Attached thumbnail(s)

Ei, sorry brother, my oc system Ram is Hynix KVR DDR2 533Mhz.

lol, 533Mhz can clock to 950Mhz! Damn! Holy Shit! I still dun't know, erm I also think this is 667Mhz one...

KVR533D2N4/1G

CHIPSET:
HYNIX KOR
HY5PS12821B
FP-C4 624A

*MTE86668Q3

only maintain at 72c at 1.550v

my current result for E6300 Super PI 1M is 16.500s. I will post it tomorrow. My target is 15.XXX s, I dun't know I can do this or not...

This post has been edited by Jian_yi: Aug 19 2006, 09:33 PM

of cource lar! no need to change Heatsink lar!

Here is my new record result for overclocking C2D E6300 1.860Ghz to 3.514Ghz.

Overclocking System setting:

C2D 1.86Ghz (Stepping : L626A422) @ 502*7 = 3.514Ghz @ 1.450v @ Intel Factory Original Heatsink I already change 626 Stepping Processor
Gigabyte P965-DS3 @ F4 Bios
Corsair XMS2 TwinX REV8.1 DDR2 675Mhz 512MB*2 (1GB Dual Channel) @ 2.3v ~ DDR2 1004Mhz CL 5 - 5 - 4 - 9 Change RAM form Hynix FP-C4 to this.

Super PI 1M Pass : 16.500s

EIST enable so when I snap picture already drop to muitiplier 6.

This post has been edited by Jian_yi: Aug 20 2006, 02:21 PM


Attached thumbnail(s)

The problem is can't disable! Even I setting "Always On", It's still enable EIST...

erm, 1.450v lor. I already write down.

Haha, me upload my lastest result again!

Overclocking System setting:

C2D 1.86Ghz (Stepping : L626A422) @ 500*7 = 3.500Ghz @ 1.450v @ Intel Factory Original Heatsink
Gigabyte P965-DS3 @ F4 Bios
Corsair XMS2 TwinX REV7.1 DDR2 675Mhz 512MB*2 (1GB Dual Channel) @ 2.3v ~ DDR2 1000Mhz CL 4 - 5 - 4 - 14 Change RAM to REV7.1

Current Super PI 1M Pass : Hit! 16.469s


Attached thumbnail(s)

I will try to prime it later, because too urgent to test. I think I can let it prime stable at 3.4Ghz, Why I know? because my friend use it at 3.4Ghz to do converting video files one night non-stop & no problem. But I still wanna to test it, wait for my news. I know you work at BB.

This post has been edited by Jian_yi: Aug 20 2006, 09:34 PM

Comming soon my E6400 overclock result I will oc tomorrow and post it for share...

This post has been edited by Jian_yi: Aug 26 2006, 12:56 AM

So far DS3 F4 offical BIOS already good in oc, no need using F5C beta bios.

Haiz, no good for my E6400 oc result, MAX is 3.5Ghz only, super pi 1M do 16.8xx no good, erm I think is processor no good, nvr mind I wanna wait next week me here comming 3 units E6400, hehehe, all open for test...

This post has been edited by Jian_yi: Aug 27 2006, 01:12 AM

How about this result?!

Overclocking System setting:

C2D 1.86Ghz (Stepping : L626A422) @ 515*7 = 3.605Ghz @ 1.490v @ Intel Factory Original Heatsink
Gigabyte P965-DS3 @ F4 Bios
Corsair XMS2 TwinX REV7.1 DDR2 675Mhz 512MB*2 (1GB Dual Channel) @ 2.3v ~ DDR2 1030Mhz CL 5 - 5 - 5 - 14 Change RAM to REV7.1

Current Super PI 1M Pass : 16.234s


Attached thumbnail(s)

Hello~ Everybody, I have self-test the "626" stepping of C2D E6400 processor overclocking.

So far, let see the testing spec...



With Corsair Twin-X DDR2 675Mhz Rev. 8.1 (512MB *2)


See Result:


With Corsair Value Select DDR2 667Mhz (512MB * 2) @ 90nm technology




The Real Monitor Screen...

Full story able here.