1.5vMCH mana cukup makan o??? 1.6Vcore oso cant help me boot into 500fsb. 99.9% is the vMCH problem. "
oredi lossen to 5-8-8-23, cant lossen anymore or else system wont boot at all
if your oc-ing failed, the ds3 will auto self-booting until its default value back. For me, I just continue the oc-ing without clearing the CMOS (unless the self-booting continuly wont stop for 5 minutes, then reset your CMOS). I encounter the F7 BIOS stuck me in the self-booting progress and wont start my PC, I just reset CMOS. Thats all, problem solved.

yepp 1.325v should be it since mine can stable at 400 x8 
my kvr? hurmm i onli feed upto 2.1 currently, but pretty amazing it can do 450 at 2.0 

siauann

400MHz cl4 at just 2.0vdimm??

very nice OC for KVR..

tak try higher ke??

my KVR highest ive trigger 460FSB at 2.1v
timming was 5-4-4-12 

i think u can do better 

Unfair man, how come KVR can perform so good? 

its d9 chipset right?

Evogenix

You will be drooling when you see most of us upgrade by that time, haha. We just can't get satisfied la, just like the reason you upgrade to E6600 from E6300. 

well, depend la
if 85% the member here upgrade, i will sure follow 

siauannn...at last been to darkside...
sold ur 2.8 proc?

Sorry, i'll try my best to keep up... Lol! Keep the results coming

One thing I like about the ASUS on the bios subject.  When I press Alt + F2 on POST, I get a screen.  Its a flash utility, and the good thing about it is I can put the bios in a USB flash drive or I can locate a bios in the hard drives attached to the mobo.  And it does not need to search, just tell it where to get it.  Very convenient and nifty feature when you are in a jam.

hahaa.. just disable the EiST thinggy in ur BIOS

^huhuu
well, try to reset again ur BIOS
heavy OC activities sometimes corrupting BIOS

^nope
reload default setup 

^maybe time to get for new fResh BIOS copy

@siauann & pearldiver
did u tick the 'apply setting upon turning on the PC' fir the ETC5? i think its because of tat. the original speed refers to the speed that u set in Bios. current speed is the speed that ETC5 setup for u. try untick the setting and restart. see whether it fix the problems or not.

those using c2 rev..do u have 4:5 divider probs?

just get one, and ignore what darksythe said below ekeke

Quoted from vr-zone.

Hope there's some way to enabled the extra 2MB cache for E6300 and E6400 

RM700 sharp..
ko ni! aku baru je siap pasang dah tanye bile nak jual  hehe