my kmac lor. Btw, what the safest way to clean pcb? I just removed removed all the switches to change stabilizer.

ohoh thanks. Desoldering isn't that difficult after all

i still can't get a proper lube for the stabilizer. Can I just use my mum's crabtree hand lotion?

shit, was browsing geekhack with proxy turned on. Got blocked
fuuuuuuu

imho, the only reason to buy SP dcs is just to impress gal

No, the proxy was used to browse kbdlab

who has the manual for ghpad?

GMK abs is super awesome
the feeling is totally different from taihao and sp
once you tried, you won't care about shine anymore



how I spent the day after 3 consecutive days of exam
this is not taihao btw

I started with a poker 2. imho, if you are just going to buy a good keyboard and settle down, or maybe a few keysets later, filco would be the best choice.
But you are planning to dive deeper, I would recommend you to start off with a acrylic custom board.
some china pcb + acrylic + switches + assemble would cost around 500rm.
later add another 100 to 400rm for keycaps depending on what you are looking for.

100 or 200 more expensive than a filco board, but you get to the whole custom experience.

I have never tried a filco. The assembly is not hard I think
There is groupbuy on 77 layout (poker + numpad layout) at the chinese community



I think hmwgbworld is getting one, you may pm him, he can help you.

Me too. I also can offer building service. Here's my build
LED + frosted look

Don't want to rebut with you la
My skill is still bad

I see posting threads to ask question and sell stuffs

I am getting one of this

Why do you wrap your keyboard?

Here's what happened. The used KMAC that I have bought has really loose and shaky (imbalance) space bar. Therefore, I have bought a new set of stabilizer from the groupbuy in EC (GON + hammer), dissemble everything, lube those stabilizer with superlube and assemble everything back. These has solved the problem partially, but the feeling is still not as good as my GON NS87, which was assembled by GON himself.

I sent GON a PM, he told me that those stabilizer has to be tuned, however he's unwilling to reveal the methods. Does anyone know how to tune the stabilizers?

Thank you

you can get Superlube Synthetic Grease 21030 (recommended by 016) from ace hardware. Less than 30RM according to my mum. Way cheaper than taobao

http://www.super-lube.com/files/pdfs/Super...ility_Chart.pdf

This post has been edited by yuktsi14: May 29 2014, 05:45 PM

I just asked my mum. The ace in ikano has plenty. Just need to make sure those tamiya grease are plastic friendly

http://imgur.com/a/lhLqo

I would advise you to get a nerd tkl and build it yourself first.
after all, custom keyboard isn't just about expensive aluminum cases, expensive keycaps...

because there are plenty of corsa