i think it make no different ....it is juz same ......

I don't see any in IT Planet 1U.
Went there a week or so to check for coolerpads but theres none.

jooku1 : AFAIK.. for coolermaster notepal..theres a curve at the HDD area for our notebook.. so air can circulate in that portion... should be able to decrease the HDD temp abit or so...

another problem is that our notebook headphone n mic ports are located in front.. so we cant use it when the lappie is on the cooler pad..

hmm.. i also interested to buy a new laptop cooling.. mine old one is useless..
from reading the post here, seems like got so many cooling pad to choose..
i want the cool and faster speed fan for my laptop..!~ any1 can gv me suggestion also?

my notebook size is 10" x 12",

so which model or brand is suitable for this nb

thanks

U can try cooler master product http://www.coolermaster.com/index.php?LT=e...F%20ADAKNotePal

or u can buy A1Pro cooling pad that cost u rm 50 .......

Anway , wat brand of cooling pad are u use last time ?

http://www.coolermaster.com/index.php?LT=e...PNC-U51+CoolPad

Pls refer to above website .....

no worries, everything solved if DIY

here's mine

how u connected ur power supply ? can u pls show us?

i m interested to see it ............

here u go!



i'm using same adapter but other brand, the pros using this instead of usb is, i can adjust the speed of the fan..

Wah, that is one great DIY job on a laptop cooler! I bet it costs lest than RM100?

ya sure, i trust u can do it oso

arcylic - RM15 (including blow hole charge RM2)
12cm fan - RM15
adapter - RM10
red rubber - RM5 (including 4 screws n nuts)
"salefon tip" - RM1

total - RM46 + RM4 (own labor) = RM50 ngam ngam

i can tell u tht, DIY cooler r always better than outside RM100+ alu cooler, as the fan position is designed urself directly to the heat area, plus 12cm is strong yet silent

kambaide, as long as LYN kaki, sure can do it, wokcah!

where u buy the adapter ?

juz plug the cooling fan wire into the adapter only .....i feel like getting a DIY cooling fan.hehehe

any shopping centre, electronic shop, or jln pasar

it connects the adapter wire with fans wire together, not plug the fan wire into the adapter except u r electronic engineering background

ya u can do tht, just use ur creativity

hehe....i m accounting background ..i dunno how to plug it ....

ok , will try to get 1 for myself.thz ya

i must warn you about the cooler master, i have the generic 3 fan aluminum notebook cooler i bought for RM65, my housemate has the cooler master RM95, comparing the fan, the cooler master blows air the weakest, you can barely feel it , unlike the generic fan, it blows strong air, although a little noisy than cooler master, but noise is not that annoying, just like the noise of an air conditioner, youd barely realize it

This post has been edited by BratPAQ: Jul 31 2006, 10:32 AM

the generic 3 fan notebook cooling pad i use doesnt submerge the whole notebook to the pad so the ports in front is still usable, maybe you should try that

wow...then i muz add 2more big cooling fan beside my notebook while i m downloading for long hours .

i wont waste my RM100 ++ on coolermaster..

This post has been edited by steventan85: Jul 31 2006, 12:43 PM

Thanks for the guide, wtm... I'll see how i can go about with my own cooler then... But is it ma-fan to carry all the stuff around when i am packing up my laptop as compared with the branded coolers?

last time i use cheap2 brand one, dunno wat brand.. lolx..
but last time my fan speed is 2000RPM, so know i wan a higher fan speed than my old one.. btw, i dont like cooler master as so many ppl complain about the slow fan speed and it also a bit pricey..