happen to me too.. vlan problem.. .. the best way to deal with this problem is change with other router.. i use TP-Link TL-WR1043ND v1 ( v2 work just fine.. i just specific the version just in case u wanna custom firmware the router later.. ).. just make sure you look at the box that write " Supports unifi ".. same goes to other brand of router if ur looking for 1..

i dont think it gonna work.. cause i think TM identify your HyppTV device by the MAC address and ur user/pass.. if u use other device with the same user/pass.. its still wont work.. since u have different MAC address..

maybe it will work if u hack and change your other device MAC address.. ..

For :
- IPTV.. u need to use the LAN on port 4..
- Surfing / streaming / your -- NAS.. u need to use the build-in WiFi..

Note :
- The EC6106V5 decoder have 2 network device.. the LAN port and build-in WiFi..
- You can connect both ( LAN & WiFi ) at the same time.. because its a different network.. the only problem is that.. later u will have a problem with the IPTV decoder ( after reboot the decoder or reboot the main router ).. this is due to the main router [ RG4332 ] problem.. the only solution is to buy a new router which support unifi..

For LAN u must use build-in WiFi..

Xsure bro.. rasanya xperlu pun rename.. just pilih je time kat recovery file HyppTV-EC6106V5-GApps-All.zip dan dia reboot sendiri nnt.. tapi.. rasa mcm xde makna sangat install GApps ni.. sebab kebanyakan apps dia x berapa compatible dgn decoder ni..

i dont think that using usb wifi on the decoder will work.. cause the decoder wont have the usb wifi driver.. the only way that i can think of is that u use the home plug with wifi version ( this is the new design.. try search for it.. ) this is the best choice for people with 3 phase cabling house.. why i suggest the wifi version cause i dont know ur on single phase cabling or 3 phase cabling house.. plus it sound more "mantap".. with WiFi~.. ..

The way to setup the IPTV.. plug 1 home plug near your main router and the LAN should be on the port 4.. plug the second home plug near your IPTV decoder and connect the LAN cable to the IPTV decoder.. it should work just fine..

Note : I have a bad experience with my normal home plug before.. but that probably because of the old version of the home plug.. latest version or the wifi version.. probably they have fix the problem..