i'm using AMD barton 2500+ ~ 1.93 GHZ
idle temp=50-51, full load = 58-60c room temp = 32-33 c no aircond
HSF using jet 7+ copper
Mobo Msi k7n2
So need some temp info 4 those using the same CPU (OC or not OC). any HSF (stock or not stock) can be applied.

This post has been edited by epul: Jul 25 2006, 10:08 AM

i used to have Barton back then... and I think that is the average temperature if you use stock heatsink... dunno about Jet 7+

AT THE MOMENT USING JET 7+, BUT SOMETIMES MY MOBO WILL WHISTLE (FULL LOAD) TO ME ESPECIALLY DURING REAALY HOT DAY AS I SET MY BIOS WARNING BEEP AT 66C

I JUST SAW ONE OF THE LOWYATIAN SPEC ALMOST SAME AS MY BUT HE OC THE CPU UP TO 2.2 GHZ.
NEED TO KNOW TEMP

epul hope this helps...

try checking out the link below,

BARTON SPEED RANKING AND ALL

Its where information on Barton users in LYN is gathered.

HOpe u can find what ure looking for

GOOD LUCK

tHANKS 4 THE INFO. I'M STILL DIGGING

Maybe this people cud help u



They might be using different boards and hardwares, although they are the same, maybe different processor steppings

Tq for the info
i check with them.

Hrmm, im using Barton too last time. The temps when i oced it to 2.2ghz is around 5+c region. Watercooled at 2.4ghz is 46c full load.

How about your room temp? last time when i'm using stock hsf much worse the temp. but now can consider ok but still worrying about the temp. luckily got aircon in the room. during full load without aircon (afternoon) using CM HSF most of time beep warning from Mobo

Mine Barton 2500 OC to 3200, idle = 70c & full load = <82c

wow
your temp so high still can run window without freeze??

do umind wat is yr actual speed 3200+ oc

@epul

mine oso Barton 2500++@2.4ghz wif air cooling(TR si-97heatpipe),load 47c idle 42c but got really high vCore =1.85v ..y not changing to si-97 instead..really good for soc462

Maybe u need to reapply the Thermal Paste. Provide a better ventilation too inside ur casing.

already rearrange the cable reapply the thermal paste
not much different for the temp
maybe the temp sensor already gila
tats why

Why Not u try and get an external temp reader/monitor.

Maybe u can get the actual temp of ur proc.

where can get this thing.

U can TRy looking at Electronics Shops, they do carry some external temperature readers.

or can open a thread in Garage Sales and Ask..

Try asking bro amok, i think he used an external temp reader, for the waterpump budget shoot out

Hope that helps...

tHANKS BRO
I TRY TO FIND THE EXTERNAL TEMP READER

OC 2500 Barton to 3200 (2.2Ghz) Will post snap-shots of cpuz & sp2004 later,
working 12HRs shifts.... haven't got the time yet