This?

this one no ODD

but the Ronin like so plain, not blingy like Phantom

Then again, the Phantom's too mainstream liao

External ODD?

no bling?? hahah well BitFenix chassis is like that most of them

Budget: RM 300
Preferred Brand(s): Corsair, Cooler Master
Must-Have-Features: Must be able to fir a MSI z87 GD65, Asus R9 270 GPU, and a Cooler Master HyperX CPU cooler. Must have front panel USB 3.0 ports. Preferably black or mostly black.
Location: PJ/KL, any store that has stock and is available for pickup asap.

Cooler Master Storm Scout II will be the best match to what you want

else there is always the BitFenix Ronin or Thermaltake GS - II if you wanna consider other brands... Corsair is a bit expensive for the same features

Thank you!

Preferred Brand: Any
Must-Have-Features:
1. HDD mounting with vibration dampers
2. Dust filters
3. The bigger the better
4. USB 3 panel isnt a concern
Budget: Absolute max RM200, dont mind used unit if its better value
Location: KL

at that price, I can't think of anything that'll have all the features you want... especially the Vibration dampeners on the HDD mounts if you're willing to sacrifice that then have a look at BitFenix Comrade or the Silverstone Redline series

Please recommend me a chassis based on details below

Budget : RM200~RM250
Preferred Brand : Any
Must-Have-Features :
1. Good for cable management
2. Transparent side window
3. Good air flow

Try to have a look at these:

Corsair
Carbide 200R
Spec-01/02/03

NZXT
H230
Source 210

BitFenix
Neos Window

Cooler Master
K550
N400 /N500

Thanks for the recommendations ! I think I go for Corsair Carbide Spec-02. The design looks sleek, good air flow and the internal has a lot of holes for cable management but more importantly, large side panel window.

Looking for M-Atx casing. Budget Rm200
Bestt to have front dust filter.
Any recommendations?

recomendation for plain n simple mid atx casing
see thru side panel a big one

lotsa Matx chassis with dust filters but at that budget I can't think of one with front dust filters.. those that have dust filters at the front (or intake) are something like Silverstone SG08, Sg09, BitFenix Phenom-M collossus-M, Prodigy-M, Corsair 350D, Xigmatex aquila, Aerocool DS cube... but they are well over RM300 each

BitFenix Neos for the budget one lotsa colours to choose from as well

This post has been edited by Clem1982: Aug 6 2014, 11:19 AM

ok
thanx suggestion bro

hi, please recommend me mid tower casing, good airflow... which you guys think are the best.
i am willing to spend for it =)

thank you all you suggestions in advance =)

This post has been edited by andykok: Aug 7 2014, 11:21 AM

That's a whole lot of chassis to consider bro... can narrow it down a little for us?? maybe specific colour or feature or size that you may want? best of all is of course the maximum budget

sorry for that , personally i prefer

- black/grey colour chassis
- easy cable management
- good air flow (i am not going to use liquid cooling, but air cooling)
- mid tower for atx board
- good quality case (solid, not easy to be scratched )

i found out that nowadays a lot of ppl using corsair chassis, any recommendations ? or there are other brand's chassis which are also good?
please share your valuable opinions

thank you

Hmm well Corsair does makes good chassis but they're not the only ones that do brands like Antec, InWin, BitFenix, Silverstone, Cooler Master and even Thermaltake all makes good chassis.. only see which you prefer

based on your requirements, I would suggest these:

Full Towers:
BitFenix Shinobi XL
Corsair Graphite 760T
CM Storm Trooper
Silverstone TJ11

Mid Towers:
BitFenix Ronin
BitFenix Shadow
Corsair Graphite 600T
Corsair Obsidian 450D
Corsair Carbide 400R / 500R
Phanteks Enthoo Pro
Thermaltake LVL10 GT
NZXT H440
NZXT Phantom Series
Silverstone Raven 04
Silverstone PS06
CM Storm ScoutII

These are but a few that I know of with great airflow and cable management, there'll be more if you wanna disregard cable management lolz but have a look at these for starters, hope it helps