any pc case with side window + good airflow within rm200 ?

SilverStone PS11

hi guys, im looking for a cheap case below rm150. any recommendation? preferably something that looks simple with window.

Budget: Below RM 350
Preferred Brand(s): None
Must-Have-Features: ATX, Solid, Good airflow but need to be covered as much as possible - full mesh is no-no (if possible no need to worry about accidental spills on the case - I have a clumsy housemate)
Location: KL

Nzxt s340

https://www.nzxt.com/product/detail/151-s34...r-atx-case.html

wow, spot on!

mATX
CM N200
CM Silencio 352

Any recommended PC case ?

1. price range : 350-450 +-, of course cheaper better.
2. Able to remove the front grill/ or even top grill , so that i can clean my front/top 2x140/120mm fans easily.
Just an example :Obsidian Series® 450D Mid-Tower PC Case
3. Provide good ventilation.

Doesn't matter if the case looks ugly etc.

Thank you.

This post has been edited by xjia: Sep 2 2015, 05:07 PM

Hmm.. bitfenix Ronin?? top and front can be removed.. and it's quite good looking imo.. should be around RM300++

Thanks for the suggestion, clem1982
Ive looked through youtube

BitFenix Ronin Mid Tower Review :
https://www.youtube.com/watch?v=B4Sz03r8DP4, and its definitely the type of casing that i would consider.

This post has been edited by xjia: Sep 7 2015, 07:28 PM

any nice itx casing to intro?
as small as possible

Currently using CM690 for few years already. Want to change it to a small and compact size as I am bored with bulky size casing.

Currently using these;
Leadtek GTX650Ti BOOST 2GD5 O.C
Intel E3-1230v3
Asrock B85M-HDS

Budget - Below RM400
Preferred Brand(s) - ANY, as long as it does not electrocute me.
Must-Have-Features - Small, compact, good ventilation.
Location - SEL/KL

Suggested to take this Carbide Series® SPEC-03 Red LED Mid-Tower Gaming Case. Want to hear more opinion from other forumers.

This post has been edited by Belphegor: Sep 8 2015, 03:23 PM

Not depend on your hardware requirements?
Smallest is this:



Since you use mATX mobo, why not Bitfenix Phenom mATX version?

Hi there, thank you for the reponse. Would like to ask if there is any other smaller in size compared to this? What's the difference between the one you mentioned and Carbide Series® SPEC-03 Red LED Mid-Tower Gaming Case?

Thanks alot.

Obvious difference is:
Phenom is for mATX (mini-tower) while SPEC-03 is for ATX (mid-tower)....short vs taller.
Phenom hardware orientation is different from normal casing. (front PSU / upside-down mobo).
Phenom airflow also have different direction compare to normal casing (from top to rear/bottom).
Phenom appearance is simple & sleek compare to SPEC-03 which is bit fierce to me.

Maybe you can search an online review for both case (or any case you interested) as many as you can before deciding.

As I am placing it on top of my table, align with my keyboard and monitor, would it cause extra heat to my CPU as well? I honestly do not care of the design as I am already giving up on looks. It's the size and compact-ability that I want.

Thank youu!

Not sure about that, have to ask real owner of this casing. Clem1982, any thought of this?

Or do you interested in Sugo SG02F?

Cooling on the Phenom-M is actually okay as you could mount fans on the top and bottom as intake and the exhaust to the back.. just keep in mind that you can't install 3.5" Hdd at the bottom if you go for this config, best to use 2.5" drives and SSD for this on the side cage that comes with it and yes, it is not the smallest chassis around for mATX chassis

Other chassis that you could consider would be Corsair air240, Aerocool DS cube, Silverstone SG08, Xigmatex Gigas, Corsair 350D, Fractal define Mini, Silverstone FT03... lol lots... just google

Finally decided to go for this

Carbide Series® Air 240 High Airflow MicroATX and Mini-ITX PC Case

Now check price see where can get cheap.

Good~! Even though that Air240 not really small in term footprint size....still unique casing nonetheless.