Welcome Guest ( Log In | Register )

129 Pages  1 2 3 > » Bottom

Outline · [ Standard ] · Linear+

Performance Parts [WTS] - Quadcore™ High Performance Plug Cable, For + power & - fuel. Starts from RM40

views
     
TSNSR
post Jul 24 2006, 03:37 PM, updated 8y ago

I am doing MNP to Maxis for Free
******
Senior Member
1,242 posts

Joined: Apr 2006
From: Penang and Ipoh


Full info can be found in: Stromberg.com.my

My next KL trip:- 26th to 29th of September 2013. Prefer delivery or installation in Plaza Hotel KL, Bandar Sunway Esso. You need to pay RM10 as deposit to my Maybank 557063326431 Stromberg Sales and Services ron@stromberg.com.my to book the item on or before 17th of February 2009. Deposit will be forfeited if you fail to deal on these days.

Get a new Stromberg sticker (worth RM12) for free (upon request only) when you purchase product from me. Please take a look at http://stromberg.com.my/merchandise/images...sticker08-1.jpg

Hi all,
I have new high performance plug cable (silicon skin) for sale at special price for all LYN members. All are new condition with 1 week personal warrantee.
Installing HPPC will make the rev lighter, better pick up and getting lower fuel consumption. Beside that, this HPPC can stay higher temperature than the ori do.
The only side effect is maybe will create some radio interference. But so far more than 500 HPPC that i sold, only 1 (4G92 Mivec using RAM 8.2mm HPPC) facing little bit radio interference. Reason causing this is found out and now more side effect after this. So you can use this HPPC with confidence.

Stock Clearance at lower price (all are new, tested by Digital Ohm Meter)

Price:
Quadcore 10mm
Daihatsu Mira L200 Turbo RM120 (usual price RM190)
Toyota AE92 Super Charge RM120 (usual price RM190)
Naza Citra 2.0 RM120 (usual price RM200)
Evo 4, 5, 6 or 7 RM90 (usual price RM150)
Hyundai Elantra 1.8 RM120 (usual price RM190)
Hyundai Matrix 1.6 RM120 (usual price RM190)
Kia Sephia RM90 (usual price RM160)
Nissan Sentra B14 RM120 (usual price RM190)
Toyota EP82 RM120 (usual price RM190)
Toyota 4AGZE 16V RM120 (usual price RM190)
Mitsubishi 4G93T GSR Reverse RM90 (usual price RM150)

JEC 8.5mm
Daihatsu Aura G100 RM40 (usual price RM90)
Toyota Corolla AE80 RM40 (usual price RM90)
Ford Laser TX3 RM40 (usual price RM90)
Honda Civic SR3 RM40 (usual price RM90)
Proton Wira 1.6 SOHC RM40 (usual price RM90)

RAM 8.2mm
Suzuki Swift 1.0 RM50 (usual price RM120)

RAM 9.5mm
Nissan Cefiro A31 RB20 6 cylinders RM120 (usual price RM300)
Mitsubishi VR4 RM (usual price RM100)

Blue Thunder 8.3mm
Nissan AD Resort RM40 (usual price RM90)

p/s:
1. I-VTEC, VVTI, VTC and DVVT are not compatible because they do not have plug cable for their engine. same to kelisa, kenari, new bmw and new mercedes.
2. Installing high performance plug cable may have interference with your radio frequency.

Warranty: 1 week personal warrantee

Dealing method: I can send to you by poslaju/courier (flat rate RM10 peninsular malaysia; RM30 East Malaysia; oversea please state your country). Penang member can COD at 1-Stop.

1. By bank in: My account info: Maybank 557063326431 Stromberg Sales and Services
2. By using credit card:
i) You can come do it in my showroom in Penang.
ii) Using online transaction. This service is powered by Paypal. Simply inform me your email address and just follow the prosedure by Paypal. No extra charge by me until further notice.

Location of seller: Penang and KL

Contact method/details: post here, pm, sms, call or email. If you have more than 3 questions kindly pls post here, pm or email.

Age of item: new

Item(s) conditions: new

Picture:

Quadcore™ 10.0mm high performance plug cable on Evo2 2.0 Turbo DOHC
user posted image

Quadcore™ 10.0mm high performance plug cable on Proton Satria Neo 1.6 DOHC
user posted image

Quadcore™ 10.0mm HPPC+ Stromberg R on Honda City 1.5 SOHC
user posted image

Quadcore™ 10.0mm HPPC + Stromberg R + Lightningaudio Ignition Earth + I-FC spec V + NGK Iridium IX spark plug on Perdana 2.0 SE
user posted image

Reason for sale: special price for LYN members! drool.gif

Feedbacks from members of LYN, ZTH and G2C:

Quadcore™
1. Quadcore™ 10.0mm HPPC on GTI 1.8 DOHC 4G93P
Ron,
1st of all thank you for coming all the way down to deliever your fine products! I have installed it myself and it works perfectly and amazingly! It restored my Gti power and I can feel the smoothness straight away. It's like having a brand new engine, of course not that new. Remember i told you about the jerking during change of gears or at 1st gear? After fitting the quadcore cables, it was smooth like hell and I even tests it at 1st gear, release the clutch and just let it roll, no jerking noticed and to my surprise my car feels like using an automatic gear box, it is that steady. I even tuned down the throttle to maintained the right engine vibration and noticed that I have been burning more fuel before installing the new cables. I will be running some test on the fuel comsumption and I believed I will gain more KM in one full tank than my irrespectable 300km. Will let you know my end results. Keep in touch!
Test return! from 330 km on full tank and reached 400 with 36 litre. Thanks once again!
As we know, GTI fuel tank capacity is 50L.
So as the conclusion:-
without Quadcore™ 10mm: 330KM = 50Litre or 6.6KM/Litre
with Quadcore™ 10mm: 400KM = 36Litre or 11.11KM/Litre
fuel saving = 68.3%

Second test came back,
Ulu Yam -> Fraser Hill -> Genting route to PJ and lasted for another week. All total 460KM but I believe it will reach 500KM, if my mum didn't pump my car! Great stuff!, I guess the 2nd test shows concrete results.
Cloudz from ZTH

2. Quadcore™ 10.0mm HPPC and NGK G Power Platinum on Wira 1.3
Just installed Quadcore™ 10mm and NGK G Power Platinum into my wira 1.3..the pickup gained like driving 1.5 one as well as the accelerate response..easy to start and immediate engine stop when switching off the key..
aieti81 from LYN

3. Quadcore™ 10.0mm HPPC and Stromberg Power Booster on Unser 1.8
After install Quadcore™ 10mm and 1 Stromberg in my Unser, i when Ipoh yesterday, form K.L to Ipoh and back K.L 494KM only use 40 litter of petrol.
csong from LYN

4. Quadcore™ 10.0mm HPPC on MIVEC 4G92 DOHC
about the fuel consumption not sure but it does help on high rev. can reach almost 9K RPM now but need to wear ear plug. really satisfied with ur plug cable.
sTRe3tHunt3R from LYN

5. Quadcore™ 10.0mm HPPC on Iswara 1.3 carburetor 1992 4G13P 12valves
Item received, installed & tested~~ !! The performance is nocticeable~~ GREAT!! Thx!!
davidgoh0610 from LYN

6. Quadcore™ 10.0mm HPPC + RAM High Performance Coil on Gen2 Campro
What can i say.. This product is one of the best plug cable that deliver full volt to plug. Impressive!!! Believe me.. No Regret use this item..
1 month use = a year satisfaction. POWER!!! POWER!!! POWER!!!
5za9 from G2C

7. Quadcore™ 10.0mm HPPC + RAM High Performance Coil on Gen2 Campro
Hi gtr.. how r u.. thanks for the installation of the stuffs.. now my engine is much smoother revving and quite noticeable increment of torque..
very nice.. Much recommended products here..
ultraxp from G2C

8. Quadcore™ 10.0mm HPPC + RAM High Performance Coil on Gen2 Campro
Install already the Plug Cable….Feel different with R3 …..i do recommend to other member change to this plug cable…
my Car feel very smooth and more power than before…..
Before this im using the R3 plug cable but after installed i only get a little bit of power (not to condemn R3 Product)…but after change to RAM Plug Cable i feel different than before….trust me..
Moral - I don’t get any token from RON (GTR) but believe me this is the good product
apitganaz from G2C

9. Quadcore™ 10.0mm HPPC + high performance ignition coil + LightningAudio® Super Ignition-Earth System on Proton Gen 2
Installed Ram Quadcore 10mm HPPC, high performance ignition coil and LightningAudio® Super Ignition-Earth System for Proton Gen 2... Engine feels extremely smooth and low end torque has increased as well as better horsepower up the top...not to mention my Gen 2 headlights with Phillips Crystal Vision are brighter... 2 thumbs up!!
jkx130289 from LYN

10. Quadcore™ 10.0mm HPPC + Stromberg Power Booster + LightningAudio® Super Ignition-Earth System on Kembara
installed lightning package on my kembara 1.3A low RPM pick up very fast and i can go 100km/h easier than last time..... lesser noise too... my boschmann bass mix speakers blaring all the time... headlights are brighter than ever... my kembara used to make noise that aren't nice when i off my overdrive.. but now the noise are much nicer and better... sharpen up the engine alot...
RenzLaw from LYN

11. Quadcore™ 10.0mm HPPC + Stromberg Power Booster + LightningAudio® Super Ignition-Earth System on Kancil
hi ron , use u product around 1 week ady lo haha .. very good for pick up o thumbup.gif .. and got saving fuel also .. very nice product .. ann now im waiting ur spark plug leh -.-'' next round u come then tell me la ok ?? thx
eddie8778 from LYN

12. Quadcore™ 10.0mm HPPC on Toyota SEG AE111
After install with QuadCore 10mm with using Denso Iridium IK20 in my Toyota SEG AE111, car feel lighter and increase torque, respond at mid and final improve, nice product and respondsible dealer.
louis924 from LYN

13. Quadcore™ 10.0mm HPPC on Toyota SEG AE111
i just received HPPC & Iridium plug last wk... and installed HPPC to my SEG (current plug still new)...
before HPPC my seg consume 1 full tank (full to first empty light) for average 370km... she's a petrol drinker.. yea i know... even my others car (wiraSE) manage go for 450km for the same fuel capacity...
right after using HPPC (only) for 2 cycles of refuelling, she manage to go average 420km... but still i don't feel the power after changed to HPPC... myb my nerve is numb.. huhu...
myamri from LYN

14. Quadcore HPPC + Iridium IX on Wira SE 1.5 (auto)
Hahahahaha....I test 10litre petrol for 2nd time...last time I use Bosch sparkplug...now use Denso Iridium Spark Plug...10litre petrol...now a'edi reach 132km and the petrol still not empty yet...maybe around 150km till drop....fuyooo.Can you imagine that?around 140-150km/10litre for Wira SE 1.5 (auto)..never feel petrol consumption very save like this...Thx for Quadcore HPPC+Iridium...Good combination I think...thx Ron:)
[xxx_xxx] from LYN

15. Quadcore™ 10.0mm HPPC + Stromberg Power Booster on Kancil 850EXS.. The special edition.. 2006 model
I could feel the performance and the pick up.. Dang nice.. Thanks a bunch NSR.. Nice guy and really knows how to impress a customer.. Very satisfied.. I've already recommended few of my friends about your time.. They'll be aftering for your product soon Dude.. Looking forward for you other interesting items in the future... Cheers!!
Devil-Boy from LYN

16. Quadcore™ 10.0mm HPPC on 4G93 DOHC and Pesona Campro
Item receive today..already install it and can i can feel the power + smooth engine.
kulus from LYN

17. Quadcore™ 10.0mm HPPC on Satria Neo Campro
Currently, Im using the Quadcore plug cables supplied by Mr.GTR.
Definitely faster response on the rev range compared to the previous ones(R3) i used. Will be giving my own review after 3 weeks of usage.
Hey there Ron. Sorry for the very long MIA. was very busy back then. Already installed the product i think 2 months back. To replace another set of performance plug cables that I use. Yes I do concur that theres better power delivery. And i believe that theres a minimal of 3-5% increased fuel efficiency. Tq again Ron. Looking forward for more members to join in the Quadcore family~
VDread from SNC

18. Quadcore™ 10.0mm HPPC on Satria Neo 1.6 Manual H-Line
Hi Ron, it's feedback time. Quadcore™ 10.0mm on Satria Neo 1.6 (m) H-Line. Tested it about a week & here is the results: The engine becomes quieter & sounds smooth. Very responsive in pick up. Very smooth in the cold morning without warming up the car. Campro engines has a torque dip at 2000 RPM & now I do not need to rev it anymore especially at 2nd gear. It will not cause static or interference to the car radio. Lastly, my current FC is 355km for a full tank of RM70. (with hard reving of coarse). Up Sale! Up Sale!
ah liew from LYN

19. Quadcore™ 10.0mm HPPC on Satria Neo 1.6
Heyah Ron!.. Installed the full packaged today. and the Engine is AWESOMELY doing good!!.. IMPROVED a lot!!.. Maybe can feeel if I significant difference when i change the ignition coil too.. which I intend to do.. soon!.. However.. the radio buzzed!!..uhuhuhuhuh. BUMP for a good item!!..
sheridansulik from SNC

20. Quadcore™ 10.0mm HPPC on Gen2 Campro
I'm one of GTR customer, bought the coil and plug cable from him through G2C. I fitted together with Volker Iridium plug with the items that i bought from him. What I can say nice response on engine, and a lot more stuff that can't be explain, but its great stuff. Free BUMP for him.
na_power from G2C

21. Quadcore™ 10.0mm HPPC on Satria Neo 1.6
good products here. can feel immediate improvement.
cruzer from SNC

22. Quadcore™ 10.0mm HPPC + Stromberg Power Booster + LightningAudio® Super Ignition-Earth System + NGK TR6IX Iridium on Gen2 Manual
Some Feedback after installed the Campro package to my Gen2 Manual.
1. Smooth Rev than before (rpm increasing more smooth)
2. Better Respone when press the pedal .
3. Have better torque since 2000rpm . from 1k-2k still weak due to the campro torque curve slope at 1k -2krpm. so keep the engine run more than 2k rpm will feel the accelerate and power (even though in gear 5th).
4. fuel consumption need some time to test out .
conclusion these thing restore the power from the campro engine .
thank RON for the installation work.
changpw from LYN

23. Quadcore™ 10.0mm HPPC on Kia Sephia 1.5 DOHC
just receive the item... already install... Damn power my car right now... thank you...
didi_85 from LYN

24. Quadcore™ 10.0mm HPPC on Kia Sephia 1.5 DOHC
yo bro.. tested me car dy.. lol.. reli got more power.. can easily reach 160km/h with 2 fatass in the car.. haha.. thx.. din noe with oni 2 cables can have such big diff.. lol..
Wackko from LYN

25. Quadcore™ 10.0mm HPPC on Proton Saga Megavalve
After i plug in the spark plug, my car's pick up performance hv significant improved compared to the old spark plug proton stock spark plug cable. Go genting at 3am just now..... fantastic power it delivered.......
Mr.Crazy from LYN

26. Quadcore™ 10.0mm HPPC on Proton Gen2 CPS
hi ron... just some simple review after my trip, pasir gudang - kl - pasir gudang... now my car feels like its on ron 97... tested with petronas and shell ron 95... FC slightly improved... since i like to drive with cruise control on, so far there has been no shifting down to maintain speed during up hill climb... good product i must say... two thumbs up...
diablo69 from LYN

JEC
27. yup, I felt my ignition is better than b4 after installing. Couple it up with iridiums is really effective.
shinjite from LYN

28. good stuff, engine revs smoother and doesn't jerk as much as with the old worn out plug cables. smile.gif
whatdamn from ZTH

29. JEC 8.5mm HPPC on 1992 Proton Saga 1.5(I)Auto ie Megavalve
Time for the follow-up/update that I promised to do for the HPPC...
1. Replacement of Defective cable :
On Weds 12 July @ abt 11am, Ron Tan (otherwise known as GTR of ZTH Forum) was already waiting for me when I went up to his shop situated on the 3rd Floor of Midlands 1-Stop shopping mall...our appointment was made via sms.
I can confirm, without any reservations, GTR is a friendly & helpful guy...in spite of being a businesman...hehe... smile.gif
My defective cable was changed w/o a word of protest of any sort!!
And, using the multimeter that I brought along, it was checked & confirmed to be in good condition & produced a reading of abt 2k ohms.
I left GTR's shop as another happy & satisfied customer!!
2. Radio Interference :
Whatever little bit of interference that was there before replacing the defective cable, is now gone!! Hooray!!
So, can confirm that NO audible radio interference resulted from the installation of the HPPC.
3. Actual Performance :
The following are now noticeable :
a. Now the car starts instantly even in the mornings. After warming up, the engine idles just great...I could revert to the old slightly weaker Air-Fuel mixture w/o any noticeable increase in engine vibrations. ( I had to increase the AF mix slightly when running with the previous single defective cable)
b. The engine runs noticeably smoother on my highway trip from Penang to Taiping.
c. Fuel Economy? I haven't taken any scientific measurements but there appears to be a slight gain in fuel savings. I travelled 200 km on a full tank and at the end of the trip, the fuel gauge still showed 3/4 tank full!
4. For comparison purposes, Ohmmeter readings of my old orig/stock Spark Plug cables are abt 8k ohm each.
This means that for RM49, the JEC HPPC provides a 2X to 4X lower resistance to the HT flowing from the distributor to the Spark Plugs.
This is value for money, considering a new set of orig Spark Plug cables cost more than RM100 a set!!
So, c'mon...bring that spark back to yr OJ!! It's affordable...
zeone from ZTH

30. JEC 8.5mm HPPC on 4g13p equipped with a Weber DCNF 42
ron boss... i received the plug cable on tuesday afternoon d.... the thing is in good condition.... just only the box is slighty kemek.... hehe.... but most importantly the stuff inside is good...
here's my feedback.... first of all, i'm driving a 4g13p equipped with a Weber DCNF 42 .... this carb doesnt come with electrical choke which means it wont pump in extra fuel to start in cold condition... so it is cumbersome to start my car in the morning.... i have to press the accelerator few times before turning ingition... but soon after i changed to this JEC HPPC 8.5mm plug cable.. i have no problem starting at all.... just need 1 - 2 cranks...
i use an aftermarket 8.5mm plug before this..... but giving me a hard time to start in the morning... but this aftermarket plug is different....
hope i'm not exaggerating over this product... cheeers
theorekz from ZTH

FAQ
1. How to know the cable is still working?
Answer: You can check the cable by Ohm Meter. Prefer using digital type.
2. If the HPPC spoilt during the warrantee period, is the any chargers for claim?
Answer: If under warrantee, I will change to a new cable for you, but you need to bare all the shipping charges from your side and my side. If you can come to my shop in Penang then no charges on the shipping.
3. If the warrantee is over, is there any charges on the shipping if want to repair or buy HPPC?
Answer: For repair, I need to send by courier the HPPC to factory in outstation after inspection is done in my shop. I have to write a report for the spoilt HPPC so that they will do according to my report. After fix, the factory will need to send the HPPC by courier to me for checking. Then I will need to send by courier to you. The repair cost per cable is RM20 and the courier charges per route(my shop to factory consider 1 route) is RM10.
For buying new cable, I can supply 1 new cable for you at RM50 and additional transport charges of RM10.
4. If I have order what I want and after I received it, the item is wat I am ordered. After I try to install and found that the item does not comply with my car. I have realise that I had given the wrong info to the seller. Sn this case, what should I do?
Your case is same like 1 of the member here, harpyboy. This is a bit complicated matter because the item I have shipped is according to his order.
He has ordered a set of HPPC for his Wira 2001. I have told harpyboy that Wira 2001 got 2 versions: VDO and MMC. I have asked him is his Wira 2001 version is VDO or MMC. I have added the question at the same time that he can send his coil picture to me for determination. He reply me that his Wira 2001 is VDO, wihout sending me the picture for determination. So, I have ship the HPPC which is belong to VDO for him. After he try to install he found that it is not compatible and suspect his coil is MMC, not VDO as per he told me. He has already trying to install and it should considered used. So in this case I cannot change to a new set of MMC to him because I cannot sell a USED hppc as NEW to other member or customer.
In my policy, goods sold are not refundable or returnable. Buyer should bare all corresponding charges. Unless thats my mistake.
After a long consideration, I have given him a good solution. I can ask my courier service to collect it back from him. If I am satisfied that the item is new and sellable condition as new item, I will change a new set of MMC HPPC for him. Condition is he must bare all the corresponding charges. Otherwise, he has to order another set of MMC. The VDO he can sell to his friend wira VDO, or I can buy it back at lower price to sell to other member as used HPPC at lower price as well.
Although I believe this should be the best solution for him but to be sincere, I am not encourage this to be happen. Kindly please confirm the info to be correct or you can send the picture that I requested.

Regards,
NSR
012-4904888 Maxis(Eco World Packaging Network*) WhatsApp and Wechat
016-4300388 TuneTalk
ron@stromberg.com.my
My bank account info: Maybank 557063326431 Stromberg Sales and Services
Stromberg Sales and Services, 488B-3-15, Midlands Park Centre, Jalan Burma, 10350 Georgetown, Penang.

* According to Wakao from LYN, if your are also the same network which you sign up the Maxis Plan with Wakao, you can sms and call me for free but up to 18 hours call and 300 sms.

This post has been edited by NSR: Oct 11 2016, 01:17 PM


Attached thumbnail(s)
Attached Image
TSNSR
post Jul 24 2006, 03:55 PM

I am doing MNP to Maxis for Free
******
Senior Member
1,242 posts

Joined: Apr 2006
From: Penang and Ipoh


QUOTE(ocphangaz @ Apr 12 2008, 11:59 AM)
very good item for the price!!! and also very good noise suppression!
i think most of you wanted to know what is inside? it's very good quality construction!

this is from Hotshot GOLD 9.2mm racing plug cable! (famous australian made performance cable; sold at ebay malaysia for RM140, even more at retail)
user posted image
it's a multi core with a soft black pvc shield and yellow silicon sleeve... for high frequency, current travel ONLY on the outer surface of the core... Cheaper or normal cable have only single solid carbon or graphite core.. so the surface area is minimal compared to hotshot gold that have significantly more surface area from the multiple cores!
Why don't people use normal copper as it does have much lower resistance? well, using copper you'll introduce EFI, or noise from the high frequency of the cable.. (at 4cyc engine at 1000rpm, you're generating 33Hz pulse at coil). the best noise supression is using carbon. but it does have high resistance. and the soft compound also means that it'll brittle from the high heat... i have a brittle core problem from a 10mm cable i used for 8 years... basially the black core become powdered.

what is in RAM Quadcore 10mm?
user posted image
you can see the core is feathered! it's actually consists of hundreds of fibre core! this translate to MORE surface area! the fibre core is protected with a black hard silicon.. when you cut this cable, you'll notice it's significantly tougher at the core. (not from the wire wound). then you'll see the third core which is the soft brown silicon which is for the fourth wire wound to stick to. compared to other brands i've used before... this wire does have much tighter wound.. actually you cannot go any tighter than that! this wire coil is for noise suppression. the more core you have, the higher the current delivered. the more current you deliver, the more "noise" you produce (faraday's law). the coil will suppress the noise or interference while deliverying current at the same time.
then the silicon sleeve is made of soft silicon... felt almost like silicon breast implant! cheaper cable uses harder silicon (which mix with rubber or other materials) making it easy to crack after long use under hot engine hood temperature. this quadcore gives me the impression that it'll lasts longer. plus the material is slightly softer than Hotshot GOLD.
I've used quadcore for my car.. revs between 3500-5000rpm feels much lighter! and i have better throttle responds.. better than my TopGun 10.5mm (almost solid core) Pro Racing cables!
*
This post has been edited by NSR: Apr 14 2008, 11:35 AM
TSNSR
post Jul 25 2006, 03:05 PM

I am doing MNP to Maxis for Free
******
Senior Member
1,242 posts

Joined: Apr 2006
From: Penang and Ipoh


Proton Gen2 using Quadcore 10mm High Performance Plug Cable

user posted image

This post has been edited by NSR: Jun 14 2008, 01:54 PM
moderno
post Jul 31 2006, 04:05 PM

*Thanks for all the memories & supports! @ LYN**
******
Senior Member
1,924 posts

Joined: Jan 2005
From: Subang Jaya

cod at KL which area? smile.gif
TSNSR
post Aug 4 2006, 12:59 PM

I am doing MNP to Maxis for Free
******
Senior Member
1,242 posts

Joined: Apr 2006
From: Penang and Ipoh


moderno,
i m in pg now. i m just back from KL yesterday.
we can cod in plaza hotel in KL or uptown 2 in damansara utama. lowyat plaza, bandar sunway and Amcorp Mall in PJ r oso ok.
anyway, wat car u wanna install?

Regards,
GTR
012-4904888
Cahill
post Aug 4 2006, 03:16 PM

-- Type (R) --
*******
Senior Member
2,754 posts

Joined: Jun 2005
From: St. James Park
pmed ........
JasonKing
post Aug 5 2006, 04:36 PM

G-Unit
******
Senior Member
1,642 posts

Joined: Oct 2005


bro for gen2 how much?
TSNSR
post Aug 6 2006, 02:35 PM

I am doing MNP to Maxis for Free
******
Senior Member
1,242 posts

Joined: Apr 2006
From: Penang and Ipoh


JasonKing,
JEC 8.5mm HPPC for Proton Gen2 is RM89 only.

Regards,
NSR
012-4904888
TSNSR
post Aug 8 2006, 07:09 PM

I am doing MNP to Maxis for Free
******
Senior Member
1,242 posts

Joined: Apr 2006
From: Penang and Ipoh


Lotusking Eaglestar 9.9mm + Stromberg Power Booster version R for Wira 4G93T GSR Turbo

user posted image

user posted image

user posted image

user posted image
TSNSR
post Aug 13 2006, 01:25 PM

I am doing MNP to Maxis for Free
******
Senior Member
1,242 posts

Joined: Apr 2006
From: Penang and Ipoh


JEC 8.5mm HPPC + Stromberg Power Booster version R for Kia Spectra 1.6L DOHC

user posted image
TSNSR
post Aug 19 2006, 01:28 PM

I am doing MNP to Maxis for Free
******
Senior Member
1,242 posts

Joined: Apr 2006
From: Penang and Ipoh


Check out my trader rating in ZTH:-

http://www.zerotohundred.com/newforums/itrader.php?u=16151
crusader2
post Aug 28 2006, 12:25 PM

Getting Started
**
Junior Member
208 posts

Joined: Jan 2003
From: PJ


Any more stock? If yes then reply my pm. thx.
mykorn
post Aug 28 2006, 01:52 PM

New Member
*
Newbie
0 posts

Joined: Aug 2006


Plug cable (10.5mm) for Wira 1.6 with Stromberg power booster, how much bro?
TSNSR
post Aug 29 2006, 02:19 PM

I am doing MNP to Maxis for Free
******
Senior Member
1,242 posts

Joined: Apr 2006
From: Penang and Ipoh


crusader2,
i have replied ur pm. RM49 if COD at jalan Raja Laut in KL. RM51 if send to u by courier service.
New JEC 8.5mm HPPC for Saga 12 valves. 1 yr warrantee.

mykorn,
Hi,
Stromberg Power Booster is only compatible with plug cable sizes from 6mm to 9.9mm only.
JEC 8.5mm HPPC for Wira 1.6 is RM99 only.
Stromberg + JEC 8.5mm HPPC for Wira 1.6 is RM298 (RM328-RM30) only.

Regards,
GTR
012-4904888

This post has been edited by NSR: Aug 29 2006, 02:22 PM
TSNSR
post Aug 30 2006, 10:42 AM

I am doing MNP to Maxis for Free
******
Senior Member
1,242 posts

Joined: Apr 2006
From: Penang and Ipoh


Lotusking 10mm HPPC (0.45k ohm resistant) for Wira and Satria 4G13 and 4G15 Injection

user posted image

This post has been edited by NSR: Oct 13 2006, 04:24 PM
scFoong
post Aug 30 2006, 11:45 PM

On my way
****
Senior Member
616 posts

Joined: Jan 2003
From: Penang


Hi,

Can you brief me how these cable able to increase the performance?

I am noobie on this area. Please advice. Thanks. smile.gif
TSNSR
post Aug 31 2006, 12:09 PM

I am doing MNP to Maxis for Free
******
Senior Member
1,242 posts

Joined: Apr 2006
From: Penang and Ipoh


scFoong,
A good plug cable can carry more amp and lower in ressistant from a point to another point e.g. from coil/distributor to spark plug. the lower the resistant, the better in performance. the below is the comparison of the plug cables for wira 4g13 and 4g15 injection engine:-

Original 6mm plug cable = 10k ohm resistant RM300 1 week warrantee
Japan made NGK 6mm Ultra high performance plug cable = 5k ohm resistant RM390 1 month warrantee
Japan Brisk 8mm high performance plug cable = 5k ohm resistant RM200 no warrantee
Germany made JEC 8.5mm high performance plug cable = 2.5k ohm resistant RM59 1 yr warrantee
England made Lotusking 10mm high performance plug cable = 0.4k ohm resistant RM149 1 yr warrantee

From the comments of my existing customers, installing JEC and Lotusking high performance plug cable results in fuel saving of up to 10% and increase in engine power especially accerelation and easier engine start-up are significant.

As we know, installing high performance plug cable may result in radio interference. but so far i sold more than 400 sets of JEC and 100 sets of Lotusking, non of the users feedback with radio interference. Only feedback with positive comments.

Before we handover the high performance plug cable to our customers, we will surely check it with Japanese made Sanwa Digital Multimeter to ensure the high performance plug cable is in working and good condition.

Please do not hesitate to post any question, I will try to answer in details. cool.gif

Regards,
NSR
012-4904888
moderno
post Aug 31 2006, 07:46 PM

*Thanks for all the memories & supports! @ LYN**
******
Senior Member
1,924 posts

Joined: Jan 2005
From: Subang Jaya

when do u able to cod at KL area bro?
TSNSR
post Aug 31 2006, 09:59 PM

I am doing MNP to Maxis for Free
******
Senior Member
1,242 posts

Joined: Apr 2006
From: Penang and Ipoh


moderno,
We can COD at 5pm on 3rd September 2006 in Uptown Damansara Utama.

Regards,
GTR
012-4904888
TSNSR
post Sep 1 2006, 10:45 AM

I am doing MNP to Maxis for Free
******
Senior Member
1,242 posts

Joined: Apr 2006
From: Penang and Ipoh


Lotusking 10mm HPPC (0.45k ohm resistant) for Saga, Iswara and Wira 4G13 and 4G15 Carburetor

user posted image

This post has been edited by NSR: Oct 13 2006, 04:25 PM

129 Pages  1 2 3 > » Top
 

Change to:
| Lo-Fi Version
0.0314sec    0.55    6 queries    GZIP Disabled
Time is now: 29th November 2025 - 09:12 PM