I cant OC my processor!, problem and have to run as default speed
|
|
 Jul 21 2006, 10:00 PM
Return to original view | Post
#1
|
 
Senior Member
4,784 posts Joined: Sep 2004 From: MY   
|
if not mistaken, its an ATi board..
plz list down what else did u tweak besides fsb.. possible solution: 1. change ram CAS timing to 3 /adjust ram timing 2. lower the LDT to 4 3. ... ... read mobo manual n understand what each option do n last but not least, dont play with vcore if u have no idea what u r doing profit? |
|
|
Jul 27 2006, 05:08 PM
Return to original view | Post
#2
|
|
Senior Member
4,784 posts Joined: Sep 2004 From: MY
|
QUOTE(fattywai @ Jul 21 2006, 10:15 PM) The bios setting is like this : i have no friggin idea what rams are u usingPCIE FREQUENCY 100 Processor Multiplier set to 11.0 (max can go to 25x) processor voltage set to 1.3v. (max can go to 1.35v, min is 0.8v) DDR voltage set to 2.70v. (max is 3.2v, min is 2.65v) PCIE voltage set to 1.2v (max is 1.5v, min is 1.2v) Vcore over-voltage (disable) Southbridge Over-Voltage (disable) PEG LINK MODE normal PEG BUFFER LENGTH (DO NOT IS WHAT) CPU frequency is 200. (max is 400 , min is 200)  so: PCIE FREQUENCY 100 Processor Multiplier set to 9.0 processor voltage set to 1.35v (winchester needs 1.4v actually.. but nevermind) DDR voltage set to 2.80v (assuning ram is hynix/samsung) PCIE voltage set to 1.2v Vcore over-voltage (disable) Southbridge Over-Voltage (disable) PEG LINK MODE normal PEG BUFFER LENGTH CPU frequency is 200 <-- up this frequency for overclock now, where is: LDT multiplier? [5x/4x/3x??] Ram timing menu/settings? |
|
Topic ClosedOptions
|
| Change to: |  0.0167sec
 0.54
 6 queries
 GZIP Disabled
Time is now: 28th November 2025 - 12:06 AM |
Quote