it should include a disclaimer: Not for casual snapfit builders

RC = wait for review

^sazabi fingers are a bit rounder in edge. so i say, it is Nu or maybe other Fed suit that uses it.

they are sending the middle finger message to bandai

^if you are referring to polycaps as the soft rubber thing, even the B version dont has it. Sinanju is one of the few MGs that does not use any polycaps.

correct me if I am wrong, but that is lacquer thinner?

if yes, B or not, it will be bad against ABS type plastic (hence new MG now highlight that it uses PS plastic frame)

also, do not use self-leveling thinner on ABS plastic, Self leveling means it is premixed with retarder. This will result slower drying time for the lacquer thinner and paint. This is good since it allows the paint to self-level before drying. This is bad for ABS plastic since the plastic is exposed to wet thinner longer.


Can I ask what you did?

1. Spray continuously without letting the earlier coat dry (cause it looks like the layer is thick)

or

2. You mist the first coat, then let the first coat dries. then apply another. (the concept is rather to cover everything with one pass, you complete the work with 2 or 3 thinner coats)

imo, finish that kampfer and try to expose more experience out of it. WHo knows you might encounter more problem while doing daban.

just convert it to fixed pose model.

@general_nic and elanges
that kind of compressor, how long can it run without running into problems? does it heat up quickly?

normal spracy cans uses lacquer or solvent to suspend the acrylics paints. so they are as dangerous as lacquer as well.

anyone got news about this? specially the price?


This post has been edited by chyll2: Aug 17 2014, 11:13 PM

thanks! I just hope it is cheaper.

@elanges
it is a SD version of SDF-1, the main ship from the first Macross.

^
it was confirmed to be a toy and not a plamo.

thanks!

yeah, I meant the SD SDF-1. I dont know what's happening, when I replied, there were no other reply other than the confirmed 100 USD price.

imo, PG astray is the more correct lineart wise, but I like MG better as well.

Still waiting for PG Strike, I know it is in the pipeline lol

probably the same price as their previous unit

300 to 350 usd

even if you add hobby matt spray can, it is still cheaper

any leak for the Aile Strike? I already got the B brand but I am a fan of Strike so I might get one. And afaik, DM has a good reputation

it is the Sword Striker pack and it looks like it is also based on a resin/upgrade kit.

ver RM only received an updated Aile Striker while the launcher and sword striker pack are recycled from the first Strike (released as P-bandai or you can buy the old Strike with Sword and Launcher)

This post has been edited by chyll2: Dec 9 2014, 11:41 PM

yes, as a model kit. Strike Rouge just means recolored Strike.

It was shown Pink in the anime because the rouge is using a modified Phase Shift armor.