nail polish remover works well for a reason, you won't be wanting it to melt your fingernails right? lol

around RMB130

pretty standard, except for the ARF

or make a Buster Centaur

online sellers, there are plenty in Trade Zone, you can try finding in Facebook too

1:3 ratio is fine, what I'm guessing is you one shot spray too thick layer, the part ended 'soak' in thinner
you should spray a few thin coats, allowing time to dry between each coat

it's not the leveling thinner that's bad for ABS, it's lacquer itself, but covering ABS parts with a layer of primer would protect it from the corrosion of lacquer

though lacquer is more corrosive, I didn't mean that leveling thinner won't harm ABS, actually any thinner would corrode ABS if exposed for a period of time
the trick is too spray multi thin coats, but that trick applies to all paint and all parts actually
hence his mistake was he sprayed too thick

I've painted on all parts with leveling thinner and never had problems
the only mistake I've done before was when want to wash off old paint, I also soaked ABS parts in water mixed with Dettol solution.
that totally ruined the ABS parts

This post has been edited by General_Nic: Aug 3 2014, 12:53 AM

solvent-based acrylic is technically lacquer

same as what I'm using, I usually turn the dial until middle

lacquer on ABS won't 'just' destroy ABS lol
it just create a chemical reaction which causes the ABS to become brittle and weak, not just break without any reasons
if you spray evenly thin coats, then the risk is lower, but the ABS do became weaker than it originally was
under stress it might crack

but acrylic not as scratch resistant as lacquer

about that brand, I tried searching in internet, it says it's from Bandai, but so far I've only seen it for sale by Malaysian sellers lol

most normal spray cans which didn't mention the paint type are acrylics
lacquer or enamel spray cans they will specify it on the packaging

price still unconfirmed, but I saw sellers in Taobao putting up prices ranging between 550-700RMB

SD SDF-1

no many reviews because it was released right before the boom of china bootlegs

it is suppose to be around that price, the price in China is estimated 600-700RMB

he meant the SD SDF-1, he quoted wrongly

meh, ARF is still sexiest with the original backpack
come on china, copy the p-b*ndai MG ARF pls

This post has been edited by General_Nic: Sep 4 2014, 05:08 PM

metal beam saber crappy, metal decal me no like, stand Bandai provided, China LED need fixing
so not that irresistible actually

then bundle with Sword/launcher pack

that one only the metal decal wor
stand memang included, then metal beam saber free together with GG PG00R received many complaints

somehow there are many fans of Spallow in mainland China