DFI selling RM415 at Ate if i not wrong ~ it state at early post~

  if you are not OC your proc ~ this will be a good choise

but when dealing with OC , Asus's Vdimm max is 1.95V so it limit me here~

i am still waiting Asus Offical result coz seen that at Asus Offical Forum got ppl got reply from Asus, so i will wait for another 1-2 week before i decide to change my mobo~

but this board really look great with copper heat pipe and cool black colour pcb~

DFI Infinity Nf Ultra-M2 (nForce 4 Ultra)

somewhere LYP la

i never been there,but got post said there selling at 415~

Biostar is another good choice if you're thinking of getting built-in graphics.

Try Hardware Sub Forum....read through there and if you cant find any suitable information, try Google key words "What is the diffrences between AMD 64 939 and AMD64 AM2"

   
pls, no spoon feeding here

if u go through this thread from 1st page, u hv already seen a lot of people OC with their AM2

Anybody here have tried oc x2 3800+? I'm tried push to 2700mhz but it's doesn't cannot boot even put high vcore.

Thats my setting now  I already OC'ed it to 2.4GHz and ran through priming for 8 hours already

Maybe I will try to push it higher, but only scare the temp would go out of control 
Trying to tighten the timings for RAM now...

@Jealousy
For RAM, you could get 1GB kit for Corsair XMS or Mushkin EM for that budget...

As for cooling method, depends which type you want. You could get a pretty good air cooler for about RM200, for liquid cooling it will be much more higher.

refer to my post earlier.... u need to use Thermalright special AM2 retention module kit Rev.B in order to use xp-90c.... and the retention kit is not easy to find.

Ya, original HSF You could refer to my earlier post for the screen shot of my cpuz and temp

You are buying value ram or performance ram? Its better to make it dual channel I'm currently using 2x512MB Mushkin DDR800 value RAM, so far so good..

As for PSU, I think its quite enough, since I remember I saw somebody in this forum using ACbel 450W and have identical setting with yours. But I guess its better for you to check how much energy your x800XT eats。。。

haha, just the same condition as mine

Anyway, if you are really tight on budget, then just get X2 3600+ since you could actually OC it to 2.4GHz or above (with better cooler). I saw an article before that manage to overclock X2 3600+ to 2.6GHz and the performance already nearly same as X2 5000+ 

As for the RAM, you could just get one stick, then later get another stick lor.

btw, ugpm 

because no shop selling them. only bulk seller like dinster sell them.

hmm, haven't try 32M yet...

But, when I try to push my clock spd higher than 2.4GHz, the whole system become unstable and will restart automatically...

Is this the sign of not enough Vcore? I tried to put 1.5 Vcore and push the clock to 2.6GHz, then my comp restart automatically while I try to stress test...