AMDŽ Socket-AM2 Overclocking thread, discuss our setup/overclocking issues
|
|
 Feb 28 2007, 12:28 AM
Return to original view | Post
#1
|
 
Junior Member
256 posts Joined: Jan 2003 From: Kota Kinabalu, Sabah  
|
Count me in! my spec is a below
 now still testing the stability after OC...but so far it cannot get pass 270FSB at 1.45v... lower the multiplier to 8 also cannot boot up. haven't try with 1.475 yet :/ any idea on how to push it higher?[attachmentid=198348] This post has been edited by InfiniteX: Feb 28 2007, 12:32 AM |
|
|
|
|
|
Feb 28 2007, 12:53 PM
Return to original view | Post
#2
|
|
Junior Member
256 posts Joined: Jan 2003 From: Kota Kinabalu, Sabah
|
QUOTE(soulfly @ Feb 28 2007, 11:01 AM) have u updated to the latest bios? Already updated to KN918, btw i manage to warm boot at 283mhz HTT at 1.575v unupdated am2 mobo often had 270mhz-280mhz HTT limitations.   btw, do i nid to pump up the MCP55 and HTT Voltage? This post has been edited by InfiniteX: Feb 28 2007, 01:03 PM |
|
|
Feb 28 2007, 01:59 PM
Return to original view | Post
#3
|
|
Junior Member
256 posts Joined: Jan 2003 From: Kota Kinabalu, Sabah
|
QUOTE(mr_habuk @ Feb 28 2007, 01:24 PM) walawehh..1.575v Of cause i not using original cooler sure u got better cooler with that vcore.. btw.i tot dfi board got build in memtest on the bios..?? where can i find it?? currently using Coolermaster Hyper TX btw here is my stable result at 2.39Ghz [attachmentid=198467] |
|
|
Mar 3 2007, 08:04 PM
Return to original view | Post
#4
|
|
Junior Member
256 posts Joined: Jan 2003 From: Kota Kinabalu, Sabah
|
hm.......Abit Kn9 Ultra mobo not stable when set to HTT beyond 266, for eg. HTT266 with run at 265, 267 with run at 266, pass 270 even worse!!! 274 = 272
 loosing control...... |
|
Topic ClosedOptions
|
| Change to: |  0.0375sec
 0.34
 7 queries
 GZIP Disabled
Time is now: 2nd December 2025 - 09:20 PM |
Quote