Eh Navi.. mind to shw your mobo temp readings?

Blue Orb II can be used on AM2.
Blue Orb II

Alright. Just bought myself DFI Ultra M2... DON'T IT DARE STICK AT THE CURSED 280HTT AGAIN!


Btw syarat you can log on to www.pcmoddingmy.com to check out about the Blue Orb II. Pcmopddingmy done a review on it quite some time ago.

Cooooooooooool. I still won't go pass 280HTT.
Oh well.. Maybe when I shift to a new house next year the curse won't be following me.

After some horrendous tweaking with my senior..
Manage to get it pass 280HTT. I might have screwed up the timings for tras and trc.



RAM limiting me now I guess. They always stuck at slightly higher then this.
Maybe I should grab some better rams. urgh.

But hey good news.. The motherboard can do waaayy more then 320HTT. Just tried that earlier.

This post has been edited by Enigmatic: Nov 17 2006, 07:25 AM

actusally wasn't wishing to post my results that early. Kinda low scores. Still paiseh.
Well, maybe after I full grab some rams.
Will update later on this post.

The Bigtyphoon VX is definitely one top performer.
Forget about the Blue Orb two. Better spend the money on another cooler unless you're into bling bling.

I echo that. The toughpower series are actually very good, and very cheap for it's performance. Suprisingly, there's this review about them.

http://www.pureoverclock.com/article638.html

Only a short one, but other reviews from the net sounds the same thing as well, the toughpower series are very good for it's price.

You'd need to get a seperated AM2 bracket for the Thermalright series unless I am mistaken, and no I don't think they're bundled with a fan. You can choose a fan which suits your needs though.

Else, I suggest the Scythe Infinity. Which is kinda hard to find unless you buy in bulk.

Irregardless, the BTVX performs quite well also.

Seems like you know the stuffs you're buying eh.

This post has been edited by Enigmatic: Dec 3 2006, 07:06 PM

Bah, my previous Acbel also gave me buzzing sound. Even worse, died on me one year after using it.

We're going waaayy offtopic here.

Got myself x2 3800EE.


let's see how far can it go later.

Mine is the 65w one. Interestingly, it's same priced as the normal 89w one. Cycom quote wan ar.. (RM330+10 for non bundle)

This post has been edited by Enigmatic: Mar 29 2007, 10:48 PM

I have a feeling I got trash.
Doing 1.525v to keep my x2 3800 65w stable on 2.4. Can't even do well on 2.5Ghz. Ugh.

Burning in.. Too much voltage there..

So it's confirmed that compuzone is selling the brisbane?
Anyone got any stepping I should be looking out for?

Well I seriously don't mind getting mine this soon, despite the promising price cuts all all those things cause don't wanna get myself another headache over upgrading later.

Furthermore, I am moving to my university campus soon *I hope*, gonna get myself away from KL quite soon.

Finding a reason of purchase soully?

PS: Doing a full migration? AM2 now does support AM2+ but not full features lo...

---

Added on April 1, 2007, 6:48 pmLOL! They ain't bringing in the brisbane for Compuzone yet. Just checked around lowyat today. Perhaps someone have any other sources to share? Other than bulk la.

This post has been edited by Enigmatic: Apr 1 2007, 06:48 PM

There is the x2 3600 windsor and x2 3600 brisbane.. Brisbane uses 65nm, rated at 65w. x2 3600 windsor also has it's 65w varient, but at 90nm. And the thing is the windsor comes with 256kb x2 cache, brisbane one comes with 512kb x2 cache.

So you got the windsor, normal x2 3600 at 65w, 90nm.

LOL! pws.. 9~11... geng man your cooler. Using what cooler. LOL~

By the way probably the bios still very buggy for 65nm la.
Just I find it damn irony. The chip is produced during year 2005, yet being sold at around this time only. I even saw windsors which are being produced at year 2006 before. Hmm...

What the heck is AMD doing.

PS: As far as I heard the Freezer64 is quite od. Why duwaNNA try out the HyperTX AMD? I think soulfly wan recommending it all around.

Just let us know your budget and we will start pummeling you with recommendations.

GeminII weee~

This post has been edited by Enigmatic: Apr 21 2007, 01:49 AM

2.3Ghz, in WHICH, you'll easily achieve with RM150 lesser.
I am doing 2.7Ghz with 1.4v. Easily. Man my cooler ain't good for dual core cooling. See if I can do 3.0Ghz later.


Noctua here I coommmeeee!!

Tuniq tower damn hard to find now wei isn't it.
Seems that your x2 5200 is rather good. Well no need to force yourself to change if not necessary la.

Higher latencies might be one of the reasons why it overclocks quite good right?


Hey pws.. sorry man don't get to online often. Yea my 9.5multi works just fine, doing 2.9Ghz (1.4v) at the moment, priming and burning in abit. Too bad I don't have a good cooler. Ish.

Wanna try 3.0Ghz today. If I can't might be due to the multi lo.
By the way nice results there, but voltage abit high.

Aiyark go do some prime95 ma.
Nice results there. I have to use around 1.425v for that. I THINK. Can't determine cause my brisby gets real hot. Need a better cooler soon.

By the way I am cooking my rams now instead. 5-5-5-12-17 at 1100mhz.

This post has been edited by Enigmatic: Apr 25 2007, 09:47 AM