AMD® Socket-AM2 Overclocking thread, discuss our setup/overclocking issues
|
|
 Sep 26 2006, 12:57 PM
Return to original view | Post
#81
|
 
Senior Member
8,753 posts Joined: Jan 2003 
|
Guys..
as always been told.. while Ocing should disable the CnQ... let say an Oced cpu that can still manage to use default voltage.. is there will give a problem if we enable the CnQ? thinking of Oced cpu is not always in load.. and to meet energy efficiency.. |
|
|
|
|
|
Sep 27 2006, 09:42 AM
Return to original view | Post
#82
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(mzms @ Sep 27 2006, 07:37 AM) I OC my orleans to 2.6 and have CnQ enabled most of the time (power savings set to portable/laptop or minimal). I only switch it off when playing games. I have never ever experienced any problems with it at all. I like it cos when surfing or emailing, I don't need all that power and my idle temps drop from about 37/38C to 33C or lower. maybe each person's exp is diff depending on their hardware? only way for you to find out is to try it yourself. here's a snapshot of cpuz while CNQ is enabled... thanks..will try later.. now i'm in burn in process, try to decrease the voltage.. oc page for sempron users.. http://eclipseoc.com/index.php?id=3,67,0,0,1,0 for M2N-E users using OCZ ram maybe similar timing.. http://www.bleedinedge.com/forum/showthread.php?t=23827 This post has been edited by 8tvt: Sep 27 2006, 10:18 AM |
|
|
Oct 4 2006, 04:23 PM
Return to original view | Post
#83
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
lol even water cooling also the cpu temp reach 70C..
i must stop dreaming to achieve above 2.6ghz.. coz using default cooler.. |
|
|
Oct 5 2006, 10:24 AM
Return to original view | Post
#84
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(pcmoddingmy @ Oct 4 2006, 04:36 PM) LOL... you can screw that Smart Guardian reading, the CPU temp is over-reported by 11 to 12ºC! That's why I've included Core Temp reading on the screenshot too. if i'm doing 2.5ghz cpu temp hit 62C but if refer the speedfan core temp only 52C... which one to take?Anyways, X2 is really hot especially when you overclock it. My 3000+ Orleans @ 3GHz hovers around 45º (Core Temp) only, even when I pumped 1.65V to it. X2 seems to be about 10ºC hotter... It also puts a lot of stress on PWM too.   if the core can stand 65C.. mine should can push more..  |
|
|
Oct 5 2006, 03:46 PM
Return to original view | Post
#85
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
i'm using m2n-e also.. it's ok what.. just waiting the better bios now..
will try 0402 beta coz can settle the warmboot case.. all have been prefectly done.. only if can raise the vdimm... atleast asus is working hard to settle the prob very fast.. |
|
|
Oct 6 2006, 02:47 PM
Return to original view | Post
#86
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
i've tried 0402 beta bios.. solve the warmboot case.. but i can't use default setting.. got conflict with my ram if run dual channel.. will wait untill it's officially release.. now revert back to 0304 bios..
|
|
|
|
|
|
Oct 9 2006, 09:32 AM
Return to original view | Post
#87
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(Seventh @ Oct 8 2006, 06:43 PM) i tried lower to ddr533 and ddr400..ddr533 limit my htt at 264 while ddr667 can reach 271..maybe it is my board 6100am2..i dunno better u provide us all the setting..what about htt mul? or heat prob.. |
|
|
Nov 7 2006, 04:06 PM
Return to original view | Post
#88
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
for daily usage (for me ofcourse) i prefer not to OC very high.. i feel no much different in the real world.. unless u really need that 1% speed and compromise with other things like mobo,ram dying.. spend more money for better cooler.. etc..
|
|
|
Nov 15 2006, 11:55 AM
Return to original view | Post
#89
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(soulfly @ Nov 14 2006, 06:48 PM) anyway.... sold my cpu and mobo already   what's next? opty.. |
|
|
Nov 28 2006, 03:20 PM
Return to original view | Post
#90
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
looking to ur sig.. u did pretty well there with M2N-E...
why u need to change it anyway... becoz of vram? |
|
|
Nov 29 2006, 02:30 PM
Return to original view | Post
#91
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
just now try back above 250 fsb..
Attached thumbnail(s) 
|
|
|
Dec 7 2006, 12:43 PM
Return to original view | Post
#92
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
why i can't find DFI board in LYP's price list? or i'm missing the shop selling? wonder why still don't have here..
|
|
|
Dec 7 2006, 05:18 PM
Return to original view | Post
#93
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(Jealousy @ Dec 6 2006, 09:27 PM) may i ask a question? if the oc my rig then if wan down clock to normal setting, jus load the default setting from the board then all back to normal?? load default not only set ur oc setting.. it's load to factory setting..mean all the other option that disable/enable by default will be loaded.. ie: sound, logo, display etc disable or enable by default... depends on mobo.. QUOTE(soulfly @ Dec 7 2006, 01:20 PM) I think ATE has DFI thanks, will look there..This post has been edited by 8tvt: Dec 7 2006, 05:21 PM |
|
|
|
|
|
Jan 8 2007, 01:03 PM
Return to original view | Post
#94
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
just refer the provided divider table then..
|
|
|
Jan 8 2007, 04:57 PM
Return to original view | Post
#95
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
if ur chip capable doing >800 then ok.. i've tried mine until 820 only.. and must use 2T.. using 533 divider for stability and tight the timing more better coz can do 1T..
|
|
|
Jan 11 2007, 11:40 AM
Return to original view | Post
#96
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
try 1.4v then.. or even 1.45v.. on ur own risk ya..
i've tried mine till 1.5v still ok.. make sure ur temp not exceed 70C at load.. now i set mine 2500Mhz with 1.45v... coz 1.4v not very stable for me.. |
|
|
Jan 11 2007, 01:29 PM
Return to original view | Post
#97
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(mr_habuk @ Jan 11 2007, 12:12 PM) 8tvt..ur still using M2N-E right?? actually if i'm using HP ram maybe i'm regret.. normal KVR not make any diff if mobo can supply more voltage.. i've tried until 820..don't think to change that mobo..?? poor 1.95vdimm really holding my ddr2 800.. coz 800 using minimum vdimm 1.95.. been thinking to change to 570infinty.. coz nF ultra II-m2 don't support 800..isit right?? tight timing would be good for me... http://forum.lowyat.net/index.php?showtopi...dpost&p=8385185 http://forum.lowyat.net/index.php?showtopi...dpost&p=8128823 http://forum.lowyat.net/index.php?showtopi...3&#entry8011273 http://forum.lowyat.net/index.php?showtopi...dpost&p=8438751 http://forum.lowyat.net/index.php?showtopi...dpost&p=8514681 http://forum.lowyat.net/index.php?showtopi...dpost&p=8385256 some link to refer back... got info for M2NE users... 0602 bios fix the warmboot n coldboot problem.. in fact it's settled on beta 05 already... got prob with stock setting (cpu/ram).. no prob with me coz i'm ocing it.. |
|
|
Jan 12 2007, 09:58 AM
Return to original view | Post
#98
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(-pWs- @ Jan 11 2007, 08:17 PM) Dude, running 2 clients of SuperPI onli can show ur system stability never heard about it.. coz superPI test for ram.. It is because 3800++ is dual core and again we still donno it's using different core if we start with 2 clients.. if prime make sense.. but better use dual core version.. |
|
|
Jan 12 2007, 11:32 AM
Return to original view | Post
#99
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
ask them to make dually version then.. lol
http://www.hexus.net/content/item.php?item=6150&page=5 the link said abit KN9 SLI - nForce 570 SLI got prob with RAM.. is it becoz NF570? ironic.. maybe i've observe somewhere.. the board using NF570 seems got same problem... coz M2N-E also facing the same prob.. but fix after bios update... if true.. NF570 should be evaded.. |
|
|
Jan 15 2007, 09:07 AM
Return to original view | Post
#100
|
|
Senior Member
8,753 posts Joined: Jan 2003
|
QUOTE(atleeyoung @ Jan 13 2007, 01:39 PM) i hv tried to overclock over last nite 3dm05/06 focus on gpu..i just put mine FSB to 230 Mhz with 533 ram divider with default speed 4-4-4-12-16 1T...no problem with memtest and super pi1m however, i found that the 3Dmark05 in default setting results in almost the same marking with my previous system (3Dmark 5980, CPUmark 6250) which is at totally default.. So, i tried with 667 at default 5-5-5-15-21..1T.errors with memtest.. so i raised my Vdimm +0.025V...then it passed the memtest.. however, i found out that i cannot enter windows normally after startup,..so i tried to raised Chipset Voltage, CPU volatage from 1.2 to 1.35V..but it is still failed.. any clue about this problem?? did u set ur mul htt to 4x? chipset voltage no need to touch... ram set to 1.9v... cpu 1.37.. |
|
Topic ClosedOptions
|
| Change to: |  0.0429sec
 0.22
 7 queries
 GZIP Disabled
Time is now: 9th December 2025 - 08:18 AM |
Quote