no la..i'm partner with moderno

btw luckily i bought biostar 570U, dun have these pci clock problem.

@camedemac

ok wat bro buy NF590 SLi.. then u can loose some weight worr..

you using Biostar Tforce 570U and 3800 x2 too so same here too la bro..

i managed to clock the highest stable till 2.7Ghz.. can boot at 2.8Ghz but not prime stable ( dun dare to increase vcore over 1.55v)

btw.. wats the highest vcore u use?

@kalakatu

how's your 3800+ X2?? how far did u push ur proc

yalorr..this week LYN quite slow ler.. dunno where's ppl go..

mine proc stock vcore is 1.2v wat's max vcore can i juice it?
need opinion here coz scared burn my proc if over juice..

1.7v ar??

really scared ler.. last time i managed to boot into window at 1.55v@2.8Ghz but now already can't boot at all if i use that setting anymore need to pump vcore.. that y i ask how much can 1 juice my proc..

will try to push more.. maybe burn in can help..

owh.. have u ever tried 1.7V??

currently running 1.5v@2.7Ghz.. dun dare to increase the voltage anymore even my full load temp is around 47-49c..

minor update from me.. my new score..

3800+ X2 Windsor F2 | zamree7 | BIOSTAR TForce 570U | Kingston DDR2-667 | SilverStone NT06 Cooler | 2753MHz




Vcore at 1.5v
Vdimm at 2.0v

update me ek abg soulfly

mekasih..

This post has been edited by zamree7: Feb 13 2007, 06:34 PM

owh.. need sum burn-in i think..

rite now only manage to boot into windows at 2800Mhz@1.575v but not stable enuff..
scared woo to use vcore above 1.6v..

wow bro.. i never get to try priming for 24 hour as my pc is not at my home but at my store here.. dun dare to leave it priming for that long.. manege to prime for only 2 hour ++

need good cooling kit if wanna to do that bro..
takut terbakar cpu aku kang.. hehe..

its good actually but scared to increase the vcore more..

2.2vdimm?? why my mobo(biostar TForce 570U) vdimm max till 2.1v oni

i think maybe ur proc limit oc to 2.5Ghz.. try change the proc and see how??

owh.. that y mine vdimm till 2.1v oni...

lucky my Kingston 667 with hynix chipset can do ddr900 with no problem at 2.0v

---

Added on February 16, 2007, 6:39 pm@davidletterboyz
eh... how to know ah its rev.5???

This post has been edited by zamree7: Feb 16 2007, 06:39 PM

haha.. found it.. thanks mate for the info.. but right now my proc holding me to reach DDR1000..

actually i tried this before..my ram is DDR667 using biostar Tforce 570U..the thing is my divider is max till DDR667..
I've set the maxclock to DDR800 but nothing happen.. its take DDR667 as the max speed.. Dunno whether this is a bios problem or its just the mobo set the max according to my ram spec(FYI i can set my ram to lower divider DDR533) ..

Bro.. its AMD.. the ram clock is depend on the divider itself..
for example:

250FSBx10 = 2500Mhz - RAM = CPU/6 - 416Mhz(DDR832)
270FSBx9 = 2430Mhz - RAM = CPU/6 - 405Mhz(DDR810)
250FSBx10 =2500Mhz - RAM = CPU/5 - 500Mhz(DDR1000)

so wat i need to get my ram running DDR1000 is either my proc can reach 3000Mhz( which is nearly impossible ) or get the CPU/5 divider (which is i dunno how to get it )..

anyone with DDR667 with Biostar Tforce 570U can change the divider to CPU/5??? and yet still couldn't find any update for my bios..

This post has been edited by zamree7: Feb 22 2007, 01:11 PM

ya my bios got option for 800 divider but it limit me to my ram spec that is DDR667 looks like i need DDR800 ram to archived that.. lol

yup.. that's right.. its not the ram problem but the mobo itself do not let me use the 800 Divider
My Kingston is DDR2 with Hynix chippy but dunno wat type..(lazy to open my case to take a look as my NT06 fully blocked my DDR slot )
that why i want to try how far my ram can go.. right now max till DDR940..

wah.. never know that ram slot oso make a lot of different in OC.. normally i'm just using slot 1/2 only..maybe later if upgrade 2GB then need to use the 3/4 slot..

i'm using Biostar Tforce 570U..also got its automatic overlocking Engine.. same happen to me if im using the V12 Tech-Engine that mobo will overclock my proc till 2.5Ghz but with vcore 1.55V which is quite high..
so rite now using manual overclock setting and currently manage to run my proc at 2.5Ghz@1.275v

New AM2 got 2 version 89W and 65W.. the 89W version will have stock vcore around 1.3-1.4v while the 65W will have stock vcore around 1.2-1.3v if im not mistaken ler..
Coz mine is the 65W version with stock vcore 1.2v

ya wat's ur clock speed?? if stock clock speed got that super PI value it is impressive man..

how high u pump the vcore?? mind to tell us
aiseh sure he can achieved that..see on 1st page he is using x2 5200 and clock a 3003MHz