better dont sell.
wait till the petrol subsidy plan pans out. who knows they give extra subsidy for cars <1300cc

cannot reverse, cannot change gear... but can move auto.
could it be just the gear lever rosak?

https://www.mudah.my/Proton+savvy+amt+gear+...er-26261647.htm


pdt can do manual gear shifting by software. so just try it first. but have to go renautech

Prak & pray, not consider retrofit. The recent price I got from last week

Spindle 65 x2
Bearing 48 x2
Brakehub 90 x2
Hub cap 8x2
Upah 150 + change engine oil + filter

Total after diskaun 550

Thanks buddy

Hmm... Refer atas, tukak carbon brush saje kan day setel?

cannot reverse case. not carbon brush, but the lever rosak.
http://pokehbusu.blogspot.com/2013/06/savv...is-lahanat.html

killed by service boy. yours probably killed by car wash people who dont know how to use.

if you adventurous, can diy button style.
the + - maybe can add to your steering like paddle shift

David, the price quoted is saga items?

Yesh. Plotong GaGa BLM. Full set. The only worry is, you need to find the bearing lock nut for both side and also the bearing holder pin. These items I weren't able to buy and has to cari from my magician. the last time I change full set close to 1000 no doubt, that's many years ago. I also didn't aware price has came down.

1 more thing, make sure yours is not ABS. I didn't know ABS version can't change to BLM, so now my Shawie think my belakang henbrek x lepas will have to find way to disable my ABS now.

This post has been edited by davidke20: Jun 14 2018, 07:09 PM

Oh ok. The unit I'm buying don't think comes with ABS, YR2005 standard unit.

The new spindle for savvy does not have the same old issue right?

Actually, no need to worry on the spindle. Just change the bearing every 50kkm or so.

So, the bearing is the culprit?

The spindle got no problem even original. The problem is, if the bearing not properly installed, man you got a big problem. The inner bearing is smaller than the other bearing which sits on the brake hub. Meaning if 1 side of the bearing wear off, the tayar will kang kang and start grinding the spindle. And hence the spindle become weaken and break.

The last time it happened to me and @nox , we all got the same symptoms of those damn bearings keep on breaking within very short time. It will not last even 5k let alone 50. Spindle already bengkok, whatever good bearing u put in, the bearing tapper will wear off and the roller will get grinded off very quickly. Technically yes no need to change UNTIL flywheel.

Pre 2008 model con9lan7firm by Plotong is weak spindle, bearing washer too thin and wrong grease used. What can I say, that's their first time came out with brand spanking new own designed chassis!

If u get the old car with spindle defect, can always go proton and change for free

hello, im using savvy manual since 2005 and the problem started last year when my family use the car at nightime, i cant start the engine tomorrow morning, and when the night comes, i can start the engine. i sent my car to workshop to check wiring engine, they suggested to change the "butterly sensor" and i replaced but after the 2 weeks, the problem is still happening until now. i only can start the engine during nightime. at daytime, i cant start the engine at all. idk why. what should i do..? thank you..

the butterfly sensor looks like this

Cannot start means long crank also cannot start? Or just click click. If click cLick check crank relay, alarm.
For long crank check these
Checked fuel pump and immobilize
The butterfly tdc sensor the wires are soldered or use connector?

Just took delivery a black savvy manual.

Issue with starting, chhiitttttttt sound and need try few times to crank start the car. Sending into William place to check.

same as my car now. like gearing of starter not engage. starter spin freely. few crank later ok.

I have to replace my starter motor

ouch. how much is the damage? prolly mine too.