http://kereta-terpakai.com/cars/electrical...carbon-brushes/

Carbon brush

i asked before.. change to saga spindle. cost more than 1k. can also check with proton side if already recalled before. try email to customer service.

change carbon brush... someone already done the video

better dont sell.
wait till the petrol subsidy plan pans out. who knows they give extra subsidy for cars <1300cc

cannot reverse, cannot change gear... but can move auto.
could it be just the gear lever rosak?

https://www.mudah.my/Proton+savvy+amt+gear+...er-26261647.htm


pdt can do manual gear shifting by software. so just try it first. but have to go renautech

cannot reverse case. not carbon brush, but the lever rosak.
http://pokehbusu.blogspot.com/2013/06/savv...is-lahanat.html

killed by service boy. yours probably killed by car wash people who dont know how to use.

if you adventurous, can diy button style.
the + - maybe can add to your steering like paddle shift

Actually, no need to worry on the spindle. Just change the bearing every 50kkm or so.

If u get the old car with spindle defect, can always go proton and change for free

Cannot start means long crank also cannot start? Or just click click. If click cLick check crank relay, alarm.
For long crank check these
Checked fuel pump and immobilize
The butterfly tdc sensor the wires are soldered or use connector?

Ya use the volume button.

Obd can read cannot tune

Repair. Very simple process

Yup exactly.

how long did your savvy rest? really necessary to replace the engine oil? maybe after 3 5 years no run kua

gear oil nut no idea. any other sifu?

ask them to trace the leak.

Inject a uv dye then trace the line

https://www.aliexpress.com/item/6-in-1-car-...2337575399.html

that is possible if you leak out/extract out the refrigerant. never leak it because it harms the ozone layer.
the uv dye is injected while the refrigerant is still inside the pipe.

good day kevin. welcome to the club
well.. have u tried putting a piece of newspaper/paper under the car, leave overnight and see if any fluid drip out?

So what is the problem u found

when you crank engine, does it crank or totally no sound at all?
if no crank sound could be battery weak

as for the no eee sound, its probably due to carbon brush. the pressure charging unit is just like a drill, use carbon brush.

just to try out today if cannot find any mechanic, just unplug the battery, leave for 30min, reattach. if you have voltmeter, do test out the battery voltage. sorry this has no scientific proof that this will work. just try luck only. i am also trying to establish the link between batt power and charging unit power