Hi otai sifu. Is it ok if i use 32mm manifold for 63mm setup? Not too big?

most of the time home to mrt station. if i'm late, i ride from kajang to KL. sometimes to run errands, maybe kajang to PJ. once in a while need to go kajang to port klang for work.

Just putting here for the benefit of others. I bought the Espada 5L tank here in JB 88rm, install 15rm.

My LC V1 full spec 62 so I usually get 120km++ per tank. After upgrading the tank and riding 80–100kmh I managed to hit 173km, which is impressive. Now I only need isi petrol twice a week which saves alot of time. Managed to top up 4.8L from empty.

The flaw of the tank is that its deeper than the old tank, so eventho fuel gauge is empty, in reality there’s still about 1L left.

Finally after become a silent reader for so long i got mine a ysuku.. 😆

Got 2 questions to ask otais in here

1. Why does d stock engine sounds loud like mesin tebu? Any idea how to reduce the sound or im being nitpicking

2. Can otai in here share whats the best EO for this bike?

Thanks 😄

since 29/05/2018 (66,314km) and now my daily-ride-lc135 spec 60mm (166cc) already clocking 98,484km. so far, top overhaul were done twice due to blown head gaskets/ top gaskets burnt resulting coolant went into combustion chamber then 'valve bocor' (too many carbon built up) > 'susah nak start'

now tempting to get that 2019 gold sym vf3i 185 (183cc) but I think why not for the last time, go for another upgrade, 63mm (183cc) semi some coated before get the new bike

any one using 5s 63mm with standard rod for daily use here? can give experience/ recommendations?

me too jarang red line and every around 1200km to 1600km already change new engine oil + new oil filter

but twice blown head gasket because I rode from Ampang to my hometown in Temerloh, about 152km per way via LPT, Karak etc and that time I use Hi-Rev 645 20W-50. when arrived at my kampung, block looks like dah macam berdarah (red coolant) now always Petronas Sprinta F700 15W-50
oh this IKK same brand I am planning to get soon... it's 62.99 semi dome coated right?

Guys, need to buy mono. RCB M2 is bad??
Suprimo ok or not?

Just watch video on utube. He dont like RCB M2.
So YSS is ok? Price a bit high....

Thanks for the advice. Let say I start kelas B lesen L, I can buy a motorcycle, put the L sticker and start riding, am I correct?

After looking at price online, it seems Y15 is more expensive than RS15. Y15 is around RM10K while RS15 around RM9K, although both official price is around RM9K. Or it could be negotiated lower?

looking at current economic, i prefer not to pursue my upgrade plan and just to use whatever i already have je

do you know what's this noise every time i rev the engine like wiuuu wiuuu

is it also same as one way bearing?

hey guys, is it ok if im using o ring from aji racing but for sprocket i'm using different brand?

rear sprocket 46t. very big

Will receive my Y15 this Saturday. Few things i want to ask.
1 - what type of EO recommended for breaking in period? Does mineral 10W 40 suitable?
2 - what is original sprocket size for Y15?  14/42T
3 - any tips on what should i take notes or changes need to be done once i receive my bike.
Thank you.

Does Lowyat have used motorcycle parts for sale section? I have quite a lot of Y15 original parts that i wish to let go.
Btw.. received my bike last week and proceed changing few items.. lol 

Yeah.. i prefer the 550 instead of 522 which is the musim nowdays.

Btw.. i change both tyres also. Using Timsun now. I want to know which tyre pressure should i follow. The pressure that printed on the tyre side or still follow the factory/manual recommendation? Manual say 22.5 while the tyre say 30...lol

Thanks

can recommend me a good brand chain for my lc v1 (clutch) beside rkm, sss, rk, d.i.d.

and my weight around 90kg, what sprocket size should i choose? prefer for top speed setting

Adakah Y16ZR replace Y15ZR?

Hi, im using LC135 (standard) and now i need to travel about 40km+ to work, do you guys have any suggestion what to do if i want to comfortably cruise at 100-110 km/h?

for now is ok but can hear the rmp high to cruise that speed, i use regina chain 428 15t-39t. Should i change the sprocket to 38t on my next chain or any other suggestion?

Hi guys,

I have a 2014 LC that is rather sluggish nowadays. Slow acceleration and struggles to get past 80km/h.

What could be the issue and how much is it to fix?

I have only ever done regular servicing as in EO and oil filter and that also got miss here and there.